This solved the problem! Thank you very much

When will you add some feature to sit out next big blind at tables that doesn't meet specific requirements? This would be great for multitabling.

PermaScan works poorly with OnGame. It needs to scan a table several times before it can realize that players changed. Can I do something to make it run better?

I do want to add it but it wont be very soon. I have thought of one idea to make it a little easier for me, that is to just send a keystroke to a table window, and if you have some type of hotkey program set up then that program would accept the keystroke and sitout next big blind

I'll check it out, I don't think this would be a problem with permascan, what's probably happening is ongame itself isn't updating the playerlist, or maybe it would update it if TST sat on each table longer?

Yes I think this would fix the problem!

Ugh there is another bug which I experienced twice: I was grinding (OnGame) and tried to open a table by double clicking when TST started open every single table one after another. I think I might have done it while TST was scanning tables, idk. Maybe it's a bad idea to do this?

Otherwise it's an awesome soft.

Ok I will check it out. But I've never noticed that before, I was thinking maybe you could set your permascan interval lower and see if that improves it? Also, if you go to configure > selection speed and set it to slowest, this would make TST wait longer on each table, if you want to test that

Opening tables during a scan is supposed to work, I haven't seen that either I'll see if I can reproduce it

I'd be very careful about adding any stuff to TST that actually works with already open tables. There are a mirrion hotkey solutions out there, keeping things compatible could end less than well...

Sending an alert via HUD saying "you're not good enough to play at this table" maybe

I didn't know you could do that, ty! I think it works properly now.

Ugh just experienced this bug again. It's super annoying because I have to shut down everything and restart OnGame client.

I use TST on XP and PokerStars. The new version always crashes after a few scans. What can I do? What else information do you need?

I'm thinking there might be a problem with the newer npgsql version I'm using for a few people, since it never happened before.

Add me on AIM/MSN/ICQ/Skype if you can
AIM: ZandryTST
MSN: zandry@tablescanturbo.com
ICQ: 571846001
Skype: ZandryTST

Here's some ideas to help me figure it out:
- What version is your postgresql?
- Try re-downloading the update and installing it again. No need to uninstall TableScan, just download and install the update on top of the current installation. That seemed to fix this issue for someone else, maybe
- Try downloading and running this fix.bat (with tablescan and stars closed): http://www.tablescanturbo.com/files/ftpfix.zip
- Could you go in Database > Manage databases and uncheck all your databases, so you have no active database. Then leave it running for an hour or two and see if it crashes. That would help me determine if it is a database issue
- If it works with no database, you might want to try changing the "host" of your database from "localhost" to "127.0.0.1"
- Could you turn on "verbose logging" at help > logging. Then each time after it crashes, go to C:\Program Files\TableScan Turbo\logs and make a copy of lastscan-verbose.log and email it to me. Make sure you get the log file before you scan again, as it will get overwritten on every scan so it doesn't get too large

I tried the new version released today. It solves the crashing problem, but sometimes most of the tables just disapperared. My max. waitlist setting is 4, and the scanning stopped after the tables with 3-4 waiting palyers were scanned. After I set the 'Scan results from the player cache' option on, the scanning were better, but if I remember well, once or twice the problem was there again.
Sorry, I play too many tables. Next week I will test it again and I will write if I have any problems.

i'm still experiencing a significant lag when i get more than 12 tables open causes by TST...

i have a pretty quick alienware so it's not an issue of my hardware...

i lately siwtched of the HUD and and unchecked "give TST highest prio"

is there anything else i can do to speed up things?

i really want to use the program but atm it slows down my stars too much so that there is no merit in using it for me...

share a small trick: right click to a PTR search:

TST-configure-advanced settings- Shortcuts(Tab)- Search the Web: (enable checkbox)
replace URL with this:
http://www.pokertableratings.com/stars-player-search/[SCREENNAME]

ok, after a table scanning, right click Screenname on Players list - Search the web , now u can see this guy PTR stats.

Add me on AIM/MSN/ICQ/Skype if you can and I'll try to help get it working right on teamviewer
AIM: ZandryTST
MSN: zandry@tablescanturbo.com
ICQ: 571846001
Skype: ZandryTST

I think probably there's something else going on, on my computer (which is about a year old but pretty good) I just tested now, TST during a scan ranges from 0-5% cpu usage and usually ~40k mem usage, pokerstars with 24 tables open during a scan ranges from 0-2% cpu usage and is at about 45k memory usage. So I would tend to think/hope that there are probably other processes using a lot of memory or CPU and tablescan is maybe putting it "over the top" in your case, I dunno If my computer is lagging it's usually when I have a ton of firefox tabs open with a lot of flash videos half loaded

Anyways, here are some other suggestions you can try:
- If you're using PT3, make sure you go in Database > Manage Databases > Edit database and turn on "Scan results from player cache". This will make a big improvement if you use PT3.
- In Configure > Advanced > Performance you could turn on "restrict tablescan to one database thread"
- In Configure > Advanced > Sites > Pokerstars there is a new option "use non-ocr pokerstars scanning method" which is slightly more efficient
- For each active database you have in TableScan, a little more resources are used, it's not really much but if you are using a bunch of active databases it might be better to try to consolidate them somehow
- You said you turned the TST HUD off, the TST can cause some lag for some in "Hovering" mode (at hud > configure > appearance) when using PT3/HM hud because it can end up fighting with the HM/PT3 hud to be right in front of the table. But the "Embedded" mode does not have this issue, if you do want to try turning it back on

Although I don't really have it documented anywhere you can also use the [SITENAME] variable if you play on different sites, like this:

I have this little problem....

TST finds player xy sitting at table "12", when i look it up at the Pokerstars lobby the player is stitting at table "13"... it is always one table "later" then TST stated.

TST shows me the correct players but the wrong table name. If i click join table TST joins table "13" but shows me in the list table "12"... confusing!

I reduced the scan speed but still the problem. Any ideas?

Make sure in Configure > Advanced > Sites > PokerStars the option "Never give lobby focus" is checked. If thats not the problem could you add me on AIM/MSN/ICQ/Skype and show me on teamviewer?

AIM: ZandryTST
MSN: zandry@tablescanturbo.com
ICQ: 571846001
Skype: ZandryTST

I just started using TST. I was having some problems, but Zandry just helped me out via TeamViewer. It was super helpful, tyvm, Zandry!

I wish I had known about this program a couple of years ago when it came out instead of just in the past few days lol.

William Hill updated a couple of days ago. Seems to me that tables where I'm sitting no longer get scanned. They seem to write such tables in bold in the lobby, not sure if this was the case before.

Thanks, I've been working on it since yesterday, I'll probably post a fix tomorrow

Anyone seeing incorrect "Won" stats for players when using TST w/ HEM2 Beta?

The below screenshot shows HEM2's (2.0.0.5273) "Net Won" (filters cleared) along with TST's (RC4 b6) results.

I've noticed some extremely skewed results such as guys losing/winning tens of thousands of $ playing a few hands at the microstakes.

Thanks, I'll check it out

Hey, when I scan for 1/1 plo on ongame it's showing no known players/not showing stats even though I have hands on the players.

Are you using omaha manager or PT3 omaha? My best guess is you need to add your omaha database to TableScan, if it's a PT3 omaha database make sure you choose "Poker Tracker 3 Omaha" as the database type

It's omaha manager.How do I add the database?