nothing wrong with those options

what site doesn't pop up when action required? all sites? and how many monitors are you using?

1 laptop, 2 monitors,

stars doesn't

haven't tried party

ahh **** was using the wrong theme let me see if thats it

obviously haha

haha ok good. keep an eye on it and see if all other sites work or not for moving to grid when action is required.. if your external monitors use different scaling than your laptop, you might have to change some windows settings

and paste me the info for the party replayer when you get a chance

Confirmed. Works on both types of tables

replayer:

title=[$2 Buy-in 6-Max NLH 141 - NL Hold'em - $0.01/$0.02],class=[#32770],pid=[9476]

table:

title=[$2 Buy-in 6-Max NLH 141 - NL Hold'em - $0.01/$0.02],class=[#32770],pid=[9476]

have pstars working fine now, mixing in partypoker brings me one small problem: if I have a party table on top of my main stack of tables (slot 1) then other tables requiring action won't pop up for some reason.

could be the scaling thing I guess, what do I do?

yeah they're exactly the same, probably not going to be able to exclude the replayer

so pretty much this just means that SaT always thinks that party requires action, even when its not your turn. you can run this Test to confirm if this is the issue:
https://www.stackandtile.com/sat/hel...op-incorrectly

if this is a new computer, then my first guess would be that you did not turn on the setting for 3 color action buttons within the party client. SaT requires that:

https://www.stackandtile.com/sat/help/partypoker

so if thats off, then turn it on, and remove and re-include the site, and then run the Test again and let me know

-> did all that, works, thanks !!

too bad about the replayer but no big deal

ahhh

trying to set up winamax,

clicking F10 to fold my hand, but it goes the call button instead. why ?

not sure, can you click File->Current Layout, and paste me your table_width/height near the top of the file?

i remember you said you have a laptop with 2 external monitors. do the monitors have different scaling %'s in windows? you MAY need to try the solutions on this page:

https://www.stackandtile.com/sat/help/windows-10-fix

try solution #2 for winamax first, and see if it fixes it. otherwise you might need to do #1 and make all monitors the same scaling %

tried 1+2 but that didn't help

table_width=816
table_height=591

so heres the tab info

Hi

I think sat is not working with gg poker after the update. It didnt recognize my tables. I tried adding it again and it wont recognize the tables as ggpoker. I tried both new and old gg poker and also tried a different detection thing in advanced options.
Any ideas?

Please try this dev version 2.98.08m

http://www.stackandtile.com/sat/tmp/...tup-29808m.exe

Remove and re-Include "GGNetworkNew"

If it still fails, use SaT's menu item for Help->Diagnostic->Get Window Title, and paste me the result for your skins main lobby

Let me know if it works

thanks seems to have worked. appreciated mate

Hello. I am EXTREMELY sad to see that when you choose hotkey "bet size 1", it does not allow you to chooses which betsize this is. Instead I had to research and found it corresponds to the sites bet buttons???

I am considering moving to stack and tile and ending table tamer but table tamer does have more hotkey functions than stack and tile has and allows to modify specific keys with specific bet sizes that will easily correspond to multiple sites.

888 poker I do not think allows you to change the default bet size buttons. They provide 1/2, 2/3, pot - none of which I ever want to use lol - For my last 1,000,000 hands I've been using 33%, 85% and 150% sizings.

If I am paying $10/month that is $120/year. I am hoping you could code specific bet sizes (33%, 85%, 150%) that would work for 888 poker or if you have any brainstorming ideas how I could mimick this on 888 poker with the current software functions.

Thank you for reading and for your time!

also is it possible to code for an "auto accept wait list and auto join table" option for 888 poker? I HATE having to manually select the seat and manually accept the buy in information every time I join. It's kind of idiotic their software still forces you to do this in 2019 lol

can we get rid of title bars and change the table sizing? (650x550, 700x500), etc? Just want to make my tables slightly bigger, but not a deal breaker if this isn't possible.

The bet sizing issue on 888 poker might be a deal breaker if table tamer support can fix the issue I need fixing, which they haven't been able to do so far....which is basically their stack and tile just doesn't work...lol

I'm curious if I could operate TT and SaT at the same time and use TT for hotkey functions/bet sizings and use SaT for stack and tile...guess I could test it but rather not pay for 2 subscriptions =)

Yes the "BetSizeX" hotkeys in SaT correspond to the preset bet size buttons on the poker table:

https://www.stackandtile.com/sat/help/bet-size-hotkeys

SaT also has a "Bet x BB" hotkey, but obviously that will only work for betting a specific blind amount.

888poker does allow you to change them, if you are using the new layout style only. They have an option within their software to use either their old or new layout, and if you use the new layout, it exposes the betslider configuration

If you use the new layout, then you should be able to modify the preset buttons on the table as I mentioned above.

I am in the process of working on a Bet%Pot feature like you are asking. It works by first clicking the 100% betsize preset on the table, and then copying out the value from the betbox and then typing back in the calculated %. So still the BetSize button will need to be configured for each site. And if a site disallows copying like WPN or Winamax then it will fail. It was working on 888. I can send you a dev version if you want to test it

Unlikely that I add this, typically I like to add features that work across all sites, and there's really no standard way to accept waitlists and handle buyins across all sites. This hasn't really been requested

SaT doesn't allow you to remove title bars right now. But you can change your slot size by creating a File->New Layout, and then Including your sites again.

I've had more than a few customers tell me that the TT software isn't as reliable. Its a tradeoff. You try to keep adding more and more features but then you end up breaking some core functionality. I always have to weigh the pros and cons for new features because I prefer to ensure my customers have a stable playing experience with the least amount of surprises/misclicks/errors, and to accomplish that sometimes I have to sacrifice adding new features. The "Bet % Pot" feature that you're asking about is one that has been requested for a while, and maybe I should've done it sooner, but the priority has always been stability of the main usage first.

I'm not sure if their software would allow that. Maybe. I know some SaT users only use SaT for the hotkeys and don't use it for the table layout management.

Thank you for the reply. I will test the new 888 table layout/design tomorrow, I just fixed the bet button options in the settings, had no idea that existed =)

Another user just told me that the 888new settings in SaT are failing on small table sizes, and I also have a fix in the works for that as well. New public version coming out soon, but dev version available now

v2.99.00

https://www.stackandtile.com/forum/s...10429#pid10429

https://www.stackandtile.com/sat/download

Hello. I have "W" as "Bet size 1" and when I click "W" it gives me a large bet, 85%.

Please advise. Everything I typed above is 100% accurate, I checked it over 10 times.

When I type "E", Bet size 2, it is indeed a large bet, about 85%
When I type "R", Bet size 3, it is indeed a 150% bet

It appears only Bet size 1 "W" is not correct, seems to be using Bet size 2 instead



Also I try to open 2.5xBB with "A" and sometimes it works, sometimes it does not.

Also, sometimes 3bets do not work (the bet 100BB hotkey) - we can get to this later though, I just want to be able to open raise and be able to bet 33% pot first.

Thank you!

Ok, so I installed latest version and 33%, 85%, 150% are working great on 888

However, on pokerstars.com, the hotkeys are shifted like i mentioned above in my previous post.

"w" which is 33% executes a half pot bet.

"e" which is 85% executes a 150% bet.

The 2.5x and 10x pre flop sizings seem to be working so far.

the "stack and tile" execution seems to be very smooth the 1 hour of testing I have done so far, there have been zero problems, which is exactly the reason I started looking elsewhere as a TT user. But the bet sizing hotkeys so far have not worked perfectly.

You'll want to make sure that 5th betsize preset button is set to "MAX" since that's what SaT would use if you set up an "All-in" hotkey

Yes there were errors with small tables on the new 888 layout, which should be fixed in the latest version 2.99.00

What Stars theme are you using on your tables and within SaT? Can you confirm that you've included the correct theme that matches your table? If you've included the correct theme, let me know which theme it is so I can look into it.

Can you also use the menu item for Help->Show Testing Info, and confirm that SaT is detecting when its your turn to act and changing from YES to NO and back correctly?


Great to hear