set up stackandtile recently

this may have been brought up before it doesnt seem to like to fill the first slot in my grid

basically all i want this program is to autotile for me. I don't need any hotkeys or anything. Its rather tilting when it fill spot 2 first.

Thanks in advance.

heh. ok, yeah the main concept of this program is to have a "stack" which is usually slot1, and a "grid" which would be slots 2-6 (or however many). the New Tables setting determines what happens to new tables obviously, and you probably have that set to put in "grid". thats why its happening the way it is.

now, theres no way to automatically do this, although there probably should be, and i will add it to the to-do list. for now, if you just want to play tiled, and need the first slot filled, you should probably just do this: set up a hotkey to "stack table", and then mouse over a table and press that hotkey, which will move the table to slot1. youll probably just need to do this once at the start of every session. (another way, set up a hotkey to "tile all tables", and when you press it, it will refresh filling up the grid and the stack.)

and since you wont be using the table movement when action is required, just set Tile Setting = never

on another thought, you could just set your Stack Slot = to your last slot number, then slot1 would start filling up first.

but you run into the same problem, that the stack slot will never get a table. another workaround is that you can add an extra slot, move it off screen or something, and set stackslot=that slot#

lots of ways, lots of options, the program is fairly powerful imo

great program, but it fails to detect and pop-up the table when you get raised all-in and you need to either fold or call. instead you have to manually locate and lock that table into grid which can get quite hectic and has caused a bunch of f ups already. dunno if it has something to do w/ only two buttons appearing instead of three? pokerstars slick dark theme.

and i still cant use my preferred hyper simple theme because SaT pops up the tables back into the grid after i've fold+stacked them. any other fix than to just keep trying to re-configure the theme? does changing backgrounds or sth help?

on some sites, it does matter that only two buttons show. but on stars, as long as there is a fold button, it should work. its very strange that this is happening, although i haven't done extensive testing on the Slick Dark theme.

can you try Classic theme just to see if this problem goes away? if we can be sure that Classic works for you, then we can rule out that its not your computer, and that its just that SaT is having problems with Slick Dark theme that i need to look into deeper.

the problem with hyper simple theme is listed here:
http://www.stackandtile.com/sat/help/pokerstars

basically, its because the pre-action fold checkbox is the same color as the actual Fold button, so SaT 'thinks' that the Fold button is visible when in actuality its not, its only the checkbox.

reconfiguring won't solve it. if you can modify the hypersimple theme to change the colors of either the checkboxes or the Fold button itself, then everything should work fine.

tried it out. im having the same problem w/ Classic theme aswell.

Ok, maybe pokerstars changed something in a recent update. I'm away for the weekend, when I get home on Tuesday i'll have a look.

thanks

I have problems with Ipoker. I made my custom configuration via site creator (I play on William Hill). For some reason SaT recognize every pop-up as a table and put it in grid. I excluded lobby when created my custom configuration but I don't know how to exclude pop-ups.
Another problem is that sometimes one of the tables start "to jump" from one slot to another one and I have to restart SaT (which always helps) but I have to stop/start every time this happens.
I use SaT to autotile+bet pot so my tile setting is never so the tables should never move between slots

wow $15 a month there's noway this program is worth that, whats the reason behind the price gouging?

next version, ipoker will be built in, with some minor issues. so you will be able to try it. for now, use this setting in your custom .ini

even with Tile Setting = Never, the tables will try to return to the stack if you send it a "stack" hotkey, or if you click on the "fold" button with your mouse. and then if the table requires action at the time, it will pop back into the grid, giving the effect of "jumping" to another slot. if my hypothesis is correct, the tables will always jump to a previous slot in the grid, but never forward, can you confirm?

if youre certain that you arent sending a "stack"ing hotkey, then maybe its because of a mouseclick on the fold button. if you dont need table movement or mouseclick detection, simply turn of "Left Click Detection" in advanced options


i dont know what stakes you play, but a few big blinds a month is hardly price gouging. within the next week i plan on changing the price slightly to make it easier on small stakes players. anyway, as a one man show, i barely make enough to pay the rent with this project. i personally think its 'worth' much more, even if you can add just one extra table to your sessions. and i reckon you can add much more than one. then again, i think PT3 is 'worth' thousands. but anyway, other people think the SaT software is worth the price, so if you dont, thats fair enough, just dont buy. the market is always right. ill put out the product and do some advertising, and leave it up to you to decide to buy or not. thanks.

hey man, i just tested on both Classic and Slick Dark, and it worked as expected. using Tile Setting = "Action required", when a table in the stack needed action because someone shoved and i could only fold or call, the table correctly popped into grid.

this is what the Slick Dark table looked like with the two buttons showing:

http://img717.imageshack.us/img717/3...rkfoldcall.png

i reinstalled the pokerstars software, my custom mods and created a new layout on SaT. working smoothly w/ the default settings. thanks!

SaT has been in pre2.0- release for a long time, hence the 1.99.* versions. Finally I feel good enough about the feature set to officially declare version 2.0

v 2.0.0
- added: new site: ongame
- added: new site: ipoker
- changed: pricing scheme based on stakes
...

full changelog here:
http://www.stackandtile.com/forum/sh...pid=217#pid217

download:
http://www.stackandtile.com/sat

I know it's not supporting Cake 2.0 yet, but when selecting other was anyone able to get it to work? I didn't see anyone coming back to say whether or not it worked after Greg instructed them to use other.

Heh, does this mean you figured how to resize their tables without dragging them for the balls?

i spent a lot of time trying to get Cake2.0 working, and it was just a huge fail all around. i have a few more ideas, but its trying my patience, and i think its probably gonna be a no-go

nope. click down in corner, move mouse, click up.

Can someone explain me how to config StackaTile sofware as to play only with one stack of tables without loosing the focus when a new tournament begins?

Maybe this was answered before but I cant read all the 200 pages because it will take me a lot of time (sorry)

Thanks in advance..

i'm not sure exactly what the problem is that you are describing. do you use hotkeys to play? if you move New Tables into the grid (which is the default), then they won't block your normal stack.. and you can use Tile Setting = Never so that the tables never move out of the stack

Werd. The client is kind of buggy by itself anyway. Thanks for giving it a try though.

Ok, firstly thanks for adding support for Ipoker/ongame.
Still there is a problem. I want to change size of the table for ongame. The size is set now is just to small (I play 2 monitors). The table is much smaller than a grid size. When I try to resize manually SaT starts to do some crazy things which makes playing impossible.
Basically I would like to have all tables the same size (multisiting). Any way to make table size the same as Ipoker??
+for some reason Ipoker settings don't work for me but my custom settings I created for William Hill work just fine

I won't get chance to fully test until next weekend, but if anyone cares, this seems to be working fine on Microgaming.

Sat will try to resize all tables to the size that it resizes to during Include Site. every poker site scales its tables differently, so there might be slight differences between clients. if the sizes are remarkably smaller, then theres a problem. if the ipoker and ongame tables are slightly off, thats normal

what you can try is, size the ongame table the size you want, and then create a whole new grid layout (File -> New Layout) and use that table as the template for the grid. you'll have to set up all your hotkeys and include sites again though. see if that changes anything

http://www.stackandtile.com/sat/help/ipoker
is your chatbox fully visible? if you have is halfway or hidden, then the action buttons on the table move over towards the center. the built in settings for SaT only work for the full chatbox

cool

Creating whole new grid layout solved the problem thx.

Ongame and Ipoker works now but I have problem with bodog via custom site creator.
Firstly there is a window that SaT recognize "Data Card Monitor". I excluded lobby but additionally I have to exclude that window I don't know how.
I have also problem with pop up windows so SaT recognize Bodog pop-ups as tables and put them in grid. I neeed to exclude pop-ups too.
Thx again for help.

ok, in your custom bodog ini, instead of uisng the "table_exclude" setting to exclude the lobby, instead use something that is uniquely in the table titles for the "table_include" setting. maybe something like "/" for blinds or "Table" if all tables have that in the titlebar