ok try this version 2.99.02za for WPN to work on Win7

http://www.stackandtile.com/sat/tmp/...up-29902za.exe

Works! Thank you so much

v2.99.03

https://www.stackandtile.com/forum/s...10632#pid10632

https://www.stackandtile.com/sat/download

So ... did not work ...

However got it working when i switched the Advanced Options -> Hotkeys "Send Hotkeys to: Table under Mouse" to Active (focused) Table

However: that means now hotkeys work when my mouse is not over a table (in that case for the last table my mouse has been over), but i think i can live with that

what didn't work?

typically if you are going to send hotkeys to the active table, you should also turn on the Advanced Option for "Highlight active table" which will put a red border around the table which has focus, so you can visually see where your hotkeys will be sent

@greg nice
Hey, i found some more details about the problem i'm facing. When the problem occurs and i click "show testing info" it shows the correct name, stakes, Tournament = NO and Action required = NO. So basically it doesn't think that action is required even though it's my turn to act.

Winning Poker (ACR) with Mod Manic (FTP classic)

Any way to get 'bet X bbs' working with mod background/cards/layout? It sends out minimal bet (I've tried different numbers but no work), same thing happens with 'All In' too.

I've tried adding using the default site profile, custom site adder 'Other' but couldn't get pass this problem. Is there maybe something I could add to the config to make it work? If not, is there a middle ground of using the different backgrounds and cards but keeping everything else default?

Yep thats a big problem, a lot of things in SAT will fail if that isn't detecting Action Required properly.

There could be many different reasons for the problem, some solutions are found here:
https://www.stackandtile.com/sat/hel...op-incorrectly

As I remember, you only have the problem on Party, so I would first make sure that you have the client set up properly, specifically that you have "3 color action buttons" turned on inside Party, and then Remove and re-Include the site.
https://www.stackandtile.com/sat/help/partypoker

Another thing I noticed is that you had an old windows theme when you sent a screenshot.. Party usually requires DWM scan mode inside SAT, which in turn requires you to have Aero theme turned on inside Windows if you are still using Win7. Although I would like to see players starting to upgrade to win10 since microsoft doesn't support win7 anymore

Let me know what you find. We need to get Action Required working correctly. If it still fails, click File->Current Layout, and paste me everything

Cards and background should not affect the "Bet x BB" hotkey usually..

Can you send me a screenshot of what the table looks like with your mod?

Are you playing tournaments or cash or both?

Looks like the mod changes player models too

Tournaments but I have tested on both

Hmmm.. i can't tell for certain, but it looks like the button locations are the same with that mod. You tried Removing your site and using the built-in "WinningPoker" site? What failed when you tried that? You should always prefer to use the built-in site rather than a custom site.

If you insist on using your custom site, open up your custom site file in this folder:

C:\Program Files (x86)\StackAndTile\Sites\

and add these lines to the bottom:

Then try again and let me know

I have tried both, the best working is the custom site

The lines didn't work

I'll revert back to stock and try moving over the backgrounds and cards (and let you know if I have any problems)

Thanks for the help.

Yes but what specifically isn't working with the built-in site? Maybe we can fix it

I forgot to tell you, you need to save the file and then completely close out SAT and reopen it, for those lines to take effect

My bad, was playing

Forgot to mention ever since I updated to newest version 2.99.03 I can't add any sites without this popup



F9 then F10 (popup appears), hit OK or X 3 times and it closes and folds my hand at said table automatically (but only after 3x and popup gone)

Just found it odd

Did that. Used Notepad++ instead of Notepad bc I needed Admin to save (is that a problem?)

Yeah you shouldn't ignore that message. But you shouldn't be getting it with all sites. For WPN, you need to choose PW scan mode in advanced options, then it should work. Previously WPN used PW scan mode internally regardless of what the user chose. But some people were having issues and needed DWM, so I allowed WPN to respect the chosen scan mode.


If you cant save with notepad, then you likely can't save in notepad++ either. If you were able to, maybe the file got saved in a virtualized location instead of the real location. Can you check what files you have in this folder?

C:\Users\USERNAME\AppData\Local\VirtualStore\Progr am Files (x86)\StackAndTile

I'd suggest right clicking on the real Program Files\SAT folder, choosing Properties, Security tab, Edit permissions, and then check "Full access" for the USERS group. I need to fix the installer to do this automatically

So I tried this before and didn't work

but

Just tried it now and.. it works perfect (was a popup about AERO theme when after I added it but beyond that, fine). Used the stock sites too. 'Bet X bb' and 'All In' working good, even added 'Bet % Pot' just to make sure I wasn't going nuts.

Weird.

Had to use Note++ bc I needed Admin privileges to save (have no idea how to do this on Notepad)

It wasn't in the virtual folder, only thing I have in there was Nvidia Graphics Drivers unless they were hidden.

ok good

is stack and tile working for bodogs bet % of the pot hotkeys?

It should... make sure you've set up Bodog correctly so that SAT can first click the Pot betsize preset button (3rd preset button) on the table.. and also make sure that SAT is correctly detecting when action is required:

https://www.stackandtile.com/sat/hel...op-incorrectly

Having an issue with iPoker where the program constantly thinks it is Hero's turn to act. This is both while playing at the table and while observing.

I've removed the site and re-added multiple times, but the issue remains.

Any ideas?

Have you tried other Scan Modes in Advanced Options?

How many monitors? If multiple monitors, you might need to try the items here:
https://www.stackandtile.com/sat/help/windows-10-fix

If you're on Win7, there is no solution right now, other than upgrading to Win10. I am working on a new scan mode that might work, but it might take some time still

Win 10. Two monitors. Changing the Scan Mode to PW fixed the issue, just like the ACR problem above. Thanks Greg

Greg, you're going to hate me. I was having some major issues with the Ignition client crashing on me despite their recent attempts to remedy it, so I upgraded to Windows 10 to see if that would help. Now Im having some issues with SaT. Here's where Im at:

Windows 10 OS
Lenovo P50 laptop as main display
Dell 30'' 2560x1600 on the side with my table grid


For the external monitor layout table management is fine but the hotkeys aren't working properly. The preflop actions are accurate, but the only hotkey that works postflop is the bet button. I ran the testing info and its telling me Action Required: NO even when its my turn to act. I made a smaller layout on my main display (laptop) and everything is working properly, but not on the external monitor.

I tried everything on these pages, but no luck.

https://www.stackandtile.com/sat/help/bodog-ignition
https://www.stackandtile.com/sat/help/windows-10-fix
https://www.stackandtile.com/sat/hel...op-incorrectly

I thought it was a scaling issue because when I launched SaT for the first time after the upgrade to win10 my old layout was slightly off until I changed the magnification from 125% to 100%

This problem isnt isolated to just Ignition

Good, this is the ultimate test to determine whether things will work or not.


My first guess too is that this is a scaling issue. I recommend you try changing to Custom Scaling as described in #2 on this page:
https://www.stackandtile.com/sat/help/windows-10-fix

If you made the #1 change to "override high DPI = Application" from that page, you can just revert that and turn it off. #2 will force both your laptop and external to both use the same scaling %. Then Remove and re-Include the sites and see if it works. That usually solves all scaling problems

No luck with trying those options again.

I should clarify. The preflop hotkeys for 'fold' and 'call' are accurate and work. Postflop they still work but do not change click locations. The postflop 'bet' hotkey is accurate. The nofication menu hotkey works. The betsize hotkeys and the allin hotkey do not work.

Its pretty strange. When I configure the site, f10 for fold won't work and action required will say no on my external monitor, but if I drag the table over to my laptop screen, everything works fine and action required turns to yes

I also tried changing the table background color but that didn't work.

Im using version 2.99.03


I just tried making the external monitor my main display but that didn't change anything