you re right it even happens when I dont have SaT running but only started happening since I got Sat. anyway ill look into fixing it

sat detects the hand replayer as a new table.. whats my play?

OK so those are my new settings https://gyazo.com/00b2b154bcd9abdafd9892955091add3 as u can see I have a total of two slots, i assigned the numpad 0 to be my ''move table to next slot'' hotkey, but that doesn't work. table doesn't move to slot two.

so slot 1 is where all my tables pop up, slot two is where I want to move a table to every once in a while (for a brief period) heres another pic that shows the slots https://gyazo.com/1b12ac67129aac9b252eb654b39a0596

whats wrong ?

On what site? If PokerStars, see SaT menu for 'Settings -> Advanced Options -> Sites tab' and look for the checkbox

I didn't see that you edited your post, sorry about that.

First you should use Visualize Grid and the +/- buttons to add all the slots you want. For example, you may want to 'set aside' more than 1 table, so you'll need more than 2 slots. Its correct that you would want to use "Move to Grid" = "Never". Then you'd want to set up 2 hotkeys, one for "Move table to next slot" (to move the table out of the stack) and another for "Stack table" (to move the table back into the stack). Unfortunately they cannot be the same key.

Are you certain the keyname is "NumPad0"? Is your numlock turned on? If you try setting it to a letter such as "A" does it work?

alright bud ill change those settings today/tomorrow and will report back if i have a problem

nice I think I got it all working,

but is there an option that will make me auto sit in? (or never go on sit out, on Pstars)

not exactly. to work around this, SaT uses a concept of "Old Tables", which means if SaT sees that a table hasn't required your action in X minutes, then it is moved to grid. this usually accounts for times when you're sitting out, or if a table has closed, etc

http://www.stackandtile.com/sat/help/table-types

Hi

is there a way to set SaT to use the call-button to determine which table requires action (without setting up a custom site)? I use it on IPoker Speed tables and SaT insta pops up tables when the the quickfold button appears. When you want to play the hand you have to wait until it's your turn which causes more urgent tables to not pop up. I was trying to set up a custom-site, but then i have problems with the layout.

there is no way without creating a custom site

but, when you initially Included the "iPokerNew" site into SaT, did you use a Speed table or a normal table?

another user said that the Speeds tables use a different color for the FastFold button. see the screenshot that he shared:
http://imgur.com/1IhDL6Y

so in this example, if you used a Speed table to Include the site, then SaT will be looking for a Green fold button, which of course means you will run into the exact issue you describe. but, if you use a normal table, where the fold button is Red just like the other buttons, then everything should work: SaT would be looking for Red, and it would see Green instead, and then it wouldn't match

so try Removing and re-Including the site using a normal table, and then test the Speed table again. and let me know if that works

Thx for the quick reply

The fold buttons have always the same color (this is Betfair Poker). Here a screenshot:

[IMG][/IMG]

That said, i set it up now like you recommended and it seems to work. Will let you know if i run into the same problem again.

hrmmm, if the SpeedFold button is the same as the regular Fold button, then you may have the problem

but, if you set it up using a normal table, and it works, then thats good. Perhaps the coordinate is landing on the white letters of 'Speed' and SaT isn't seeing the purple

let me know if you run into problems

You'll probably need to use a hotkey for "Move table to slot X" as well as turn on the setting in: Advanced Option -> Hotkeys -> "When using 'Move table to slot X' hotkey, also Keep table in grid"

When the "Keep table in grid" hotkey is used on a table in the stack, it should already move the table to the next grid slot numerically

Yea, I want to move table from stack to slots on another monitor rather than my numerical order for my stack and tile grid. "move table to slot x" will work but only keeps the table in grid when its done from the stack. If I have a table in a standard slot and "move to slot x (with keep in grid on) it moves it but doesn't keep it in the grid, I have to click keep in grid.

yep thanks, this is a bug. try this version v2.90j

http://www.stackandtile.com/sat/tmp/...Setup-290j.exe

Fixed thanks

yo,

I don't really feel like my tables pop up in the right timing order? like the most urgent table should pop up first and stuff, any options for me to look through?

this is pokerstars

Yep go through this Test:
http://www.stackandtile.com/sat/help...op-incorrectly

And make sure this option is turned off:
http://www.stackandtile.com/sat/help/focus-stealing

I play on 4 sites and use a hotkey for "fold and move to stack". This works on 3 of those sites, but on Winamax, it thinks I am pressing the call-button which results in me making some very funky calls at times if I don't pay attention.

the problem likely relates to the fact that i've tried to allow the "Fold (+Stack)" hotkeys also click the "Check" button when you can check for free. however, sometimes if the table size is weird, this detection messes up

i've added a fix for the next version, but i'm not ready to release it just yet

please download this development version v2.90k:

http://www.stackandtile.com/sat/tmp/...Setup-290k.exe

check the version number on the About tab, then please test it and give me feedback whether or not its fixed. thanks

Seems to work perfectly in that version - Thanks.

Unfortunately, it only worked when testing with one table. As soon as a second winamax table popped up in my session, I got an error message saying "Failure to resize table" and "Table will now be ignored".

Greg, how can I just use stack mode? I have stack selected but tables keep popping over the one that I actually want to select an action at.

tia

hi

can i set hotkeys that are working over every platform with your software?
if yes, is mouse over table an option?
are preset betsizes possible?

Try removing and re-Including the site and see if that fixes that.

I'm assuming that first table that you want to select action at, is a table that actually requires action. If you're trying to 'act' by clicking on one of the advanced action checkboxes, then of course a real table that requires action will take precedence and pop over.

But if that first table does in fact require action, then perhaps SaT isn't detecting it correctly. You can find that out by running this Test. Try it with one table on each of your sites to make sure that its working right:
http://www.stackandtile.com/sat/help...op-incorrectly

Also, make sure you've turned off each site's focus stealing option:
http://www.stackandtile.com/sat/help/focus-stealing