yep

yep

not currently. i'm not sure yet if i will add this or not. you have two options:

1. 'BetSize' hotkeys which click the preset buttons that exist on the table:
http://www.stackandtile.com/sat/help/bet-size-hotkeys

2. 'Bet x BB' hotkeys

This is not even possible. When I try I get an error message saying something like "table does not match Winamax....."

what does the exact error message say? are you sure you're clicking on the table first before pressing F9?

It says: Failure: And then the table name, (which I have obviously checked is the correct one) does not match for this site.

Yes, i am sure i am doing it correctly as i have been using the program for 2 years and set up tons of layouts before.

Hrmmm thats a problem..

Can you use the menu item for "Help -> Diagnostic -> Get Window Title" and paste me the results for both 1. the main lobby as well as 2. the table itself?

And also click "File->Current Layout" and paste me everything

A table that doesn't require any action will pop-up over a table that needs action. If that table that's in front does eventually require action, after I make an action, the tables below still won't come to the foreground.

clearly the whole detection of action required is not working for you. so did you run the Test like i suggested? what were the results?

hi. i am playing on stars and 888 and using stackandtile. i use a 12 tables layout on my 1920*1080 monitor resolution.

the problem is that 888 tables are way too big. is there any solution to fix it? how can i make 888 tables smaller so they don't overlap that much?

this should only be a problem if you're still on the old 888 client. is that so? i thought 888 forced everyone to update. what is the site you've got included in SaT? is it "888PacificPoker" or "888PacificPokerQT" ?

if youre on the old 888 client, and using the non-QT site within SaT, then your only option is to create a new layout like this:

Create a new layout with the menu File -> New Layout. When the wizard asks you to press F7 to define your grid slot size, choose a table from 888. Then, using your mouse, resize that 888 table to the size that you want your tables to be, and then press F7. This will define your grid slot size to use the native proportions of 888. Now, when you go to include your other sites, SaT will attempt to resize Stars to match the 888 size, instead of the other way around.

because of the legislation in my country 888 was forced to make some updates for the software so we don't play on .com anymore, but on .ro. before the update i didn't had any problem with 888. in Sat i have 888PacificPokerQT.

if i make a new layout the table will be bigger and i don't want them to overlap.

Ahhh I see whats happening now. I think your grid slot size is just too small for 888. Even with SaT turned off, if I try to resize an 888 table with my mouse by dragging the right edge of the table, the smallest I can make it is 559x405. The 888 client just won't allow me to go any smaller. So, if your SaT grid slot size is smaller than that, first SaT will try to resize the table to that size, but it then fails because 888 just doesn't allow it.

So there's really nothing that can be done. Well, I guess there is one thing: you can complain to 888 and tell them to allow their tables to be resized smaller I doubt they will listen

title=[Deepstack Hold'em(170066176)#005 / 50-100 NL Holdem / Buy-in: €5],class=[ApolloRuntimeContentWindow]

title=[Lobby],class=[ApolloRuntimeContentWindow]


[settings]
table_width=1016
table_height=759
total_slots=12
slot1x=1544
slot1y=0
slot2x=1544
slot2y=759
slot3x=2560
slot3y=0
slot4x=2560
slot4y=759
slot5x=3576
slot5y=0
slot6x=3576
slot6y=757
slot7x=527
slot7y=0
slot8x=527
slot8y=758
slot9x=4104
slot9y=0
slot10x=4104
slot10y=757
stack_slot=0
newtables_slot=grid
move_to_grid=never
oldtables_duration=5
oldtables_slot=0
scan_mode=DWM
play_mode=tile
slot11x=0
slot11y=0
slot12x=0
slot12y=757
[general]
show_walkthru=0
gui_x=3735
gui_y=591
last_tab=
filename=wpn.ini
is_reloading=1
version=2.90k
win_ver=10.0.10586
v=sm
v290_msg=0
[sites]
WinningPoker_included_executable_path=C:\YaPoker\Y aPoker.exe
WinningPoker_included_resized_table_width=1016
WinningPoker_included_resized_table_height=759
WinningPoker_included_fold_color=0x1d4927
WinningPoker_included_call_color=0x2c703c
WinningPoker_included_bet_color=0x2a6c39
number_of_sites=3
included_sites=WinningPoker,Microgaming,Unibet
Microgaming_included_executable_path=C:\Microgamin g\Poker\NordicBetDenmarkMPP\mppoker.exe
Microgaming_included_resized_table_width=816
Microgaming_included_resized_table_height=639
Microgaming_included_fold_color=0xb67741
Microgaming_included_call_color=0xb67741
Microgaming_included_bet_color=0xb67741
Unibet_included_executable_path=C:\Program Files (x86)\Unibet Poker\Unibet Poker.exe
Unibet_included_resized_table_width=1016
Unibet_included_resized_table_height=789
Unibet_included_fold_color=0x812bb
Unibet_included_call_color=0x196ff
Unibet_included_bet_color=0x31914c
[hotkeys]
number_of_hotkeys=9
hotkey1action=BetSize 1
hotkey1key=1
hotkey2action=BetSize 2
hotkey2key=2
hotkey3action=BetSize 3
hotkey3key=3
hotkey4action=Stack table
hotkey4key=S
hotkey5action=Sit Out Next BB all tables
hotkey5key=O
hotkey6action=Disable Hotkeys
hotkey6key=H
hotkey7action=Ignore table
hotkey7key=I
hotkey8action=Keep table in grid
hotkey8key=G
hotkey9action=Fold + Stack table
hotkey9key=~RButton
send_table_under_mouse=1

The easiest way to test if this problem actually exists is this:

1. Set your Play Mode to 'Stack and Tile'.

2. Ensure that you have more than 1 slot in your SaT grid and that you have a Stack Slot set up. Use 'Visualize Grid' to confirm

3. Set 'Move To Grid' setting = 'When Action Required'


hey im trying to fix a few things so I was doing all the steps in this list, but what does step 3 mean? because right now I have the Move To Grid option set as ''Never'' (as seen below in pic)

https://gyazo.com/f2509f8e01bf9e724702c627fff6396e

What changes if I set the move to grid option to When Action Required?

see here:
http://www.stackandtile.com/sat/help...o-grid-setting

the Test just is easiest with that setting. you can change it back once you're done testing

no idea whats going on here. these should match fine during Include Site setup. have you tried other table types when Including, such as a cash table?

.edit tmor

I can include the site when I have only Winamax open (tried this with playmoney). However, when I start my session (I play MTTs) and as soon as the second Winamax table pops up alongside the other tables the problem arises - at times the same thing happens on the Unibet tables, but not every time. After the error message saying the table will be ignored, I am not able to reinclude the site because that is where I get the error message saying that the table does not match the site.

hrmmm interesting. so there was a minor change in 2.90k to make Winamax and Unibet more compatible together, because they both use the same window_class "ApolloContentRuntimeWindow". i thought i had improved things. Unibet keeps banning all of my accts even though all i use is play money so i couldn't test it directly.

the resizing error isn't too big of a deal. its just saying that the table couldn't be resized correctly, and that error message causes SaT to stop trying, so that it doesn't go into a never-ending resizing loop. usually you can toggle the ignore state off by using the "Ignore Table" hotkey on that table, which will cause the table to be un-ignored and then SaT would attempt to resize it and re-add it to the grid.

are you using the built-in "Unibet" site or a custom created site?

Sorry to say, but it seems you made it worse Like I said in the first post everything was working fine in the former version except for the fold + stack hotkey on Winamax.

At the moment I am using the built in Unibet (and Winamax). I actually tried a couple of times to create a custom site with winamax, but that was not possible either. Those two sites also always have the problem that the lobbies are recognized as tables, so I always have to put their lobby-Windows on ignore with a hotkey when I press start.

hrmmm were those lobbies getting detected as tables even in the old version? because they should always be excluded. something is definitely going wrong

i sent you a PM asking for your skype name, maybe we can debug it

1. For whatever pokersite you are having problems with, find the shortcut that you use to open the poker client. For example, if you open up PokerStars by clicking the PokerStars shortcut file on your Desktop, then thats what you will need. Right click that shortcut icon, and then select 'Properties'. Then click the tab 'Compatibility'. Then click 'Disable display scaling on high DPI settings' and hit 'Apply'. You may notice that the poker site now looks a little different, maybe the fonts are a different size. Then, simply Remove and re-Include the site within SaT, and see if that works. If not, then try #2

and then select 'Properties'. Then click the tab 'Compatibility'.


I don't have the tab compatibility? If I open skype that way, I do see the options, but not with Pokerstars.

Hello, I use btn right click fold mouse in many sites but in Tiger only work for me betting btn, How I can fix that? Thxs

I don't believe this should be an issue on PokerStars. But if you need to try it, you can move on to solution #2 which will change the DPI settings system wide

Remove the RButton hotkey and then add it again, and when SaT asks you whether or not you want to pass the click through, choose No

This page will cover any of the following problems:

Why are the stack tables going to the grid?
I try to send tables to the stack but they immediately pop back to grid!
Tables are popping to the top of the stack that don't require action!
I cannot put tables into the stack.
Tables are incorrectly stealing focus from each other



So

I don't really have any of the above I think? But I think the tables are not popping up in the correct order... so for example I need to act on 6 tables, then I don't have the most urgent table popping up first?