Sounds pretty sick

Hope it changes soon for you :thumbup:

trying to add party poker with my basic classic theme mod onto SNT, but the fold button wouldnt work, so I went through the custom site setup walk through and everything seemed to work just fine,saved/loaded the custom .ini, and it still fails to fold again during setup, any ideas? Thanks.

also, my test hotkey worked (for folding durng setup) with FTP, but now it wont work while the program is running, 888 hotkeys ARE working. Thanks again

during the Customer Site Wizard, did you test the click to make sure that the Fold button coordinates were correct and that it was working? if you did test it and it worked correctly, perhaps your slot size in SaT is extremely large or small and its causing the coordinate scaling to be incorrect. you can test to see if this is the case by creating a new layout (File->NewLayout) and using the default party table size and see if you can indeed Fold or not during the Include Site setup. (this is just to test.. you can always go back to your old layout with File->Open Layout)

the fact that you mention there is a mod makes me wonder what this mod actually does. does it move the buttons around at all?


if pressing F10 to fold during Include Site setup did work for FTP, then it should work during gameplay as well... maybe you are trying a different game type or something such as Zoom poker?

FTP-
Does SNT not work for Zoom? SNT worked perfectly fine during site setup, it resized table instantly, folded without any problems, and it also stacks/tiles the site, just the hotkeys won't work. I did try it on Zoom, so I removed site, re-added it while playing on a standard table, and hotkeys still do not work.

----------------------------------------

Party --

I don't think the mod moves the buttons around. When trying to add party classic by default, I get an error "Something went wrong: fold button color for PPclassic is detected as black. This usually indicates a problem. If you are certain the button color is actually black, ignore it. Otherwise, cancel and try again. If that fails, try a new scan mode in advanced options, and then remove and re-include the site.

Using Aero so I get a message to go back to the DWM scan again. --- so, I am trying to add it as a custom site; I tried already and I think it tested correctly, but I will try again to try to get it working.

- Making a new layout to test as requested; party table in default size. Added party poker, same error as before (button is black, did not fold). Since that did not work, I am going to try adding the site again and double checking to make sure the test click is working and all;

1- Custom site creator take 2-
Windows matched; testing on Party highlights 1. the tournament table 2. pp.com lobby, #3 DataCardMonitor (?).

I excluded lobby text, then when I tried to attach the table, only "attached: DataCardMonitor" appears. I have no idea what that is and nothing is highlighted afaik. Went back and made it include text "table" and it seems to work and attached only the table just fine.
2- Test click worked just fine, even the pre-fold click worked. Fold region shows directly over the fold button, and its even showing through my browser window while I am on the "call button coord" page. Call button grab works, region looks good. Bet button click grab works fine, region looks good.
3. Adding the site ini -
I hit F9 to grab, and it immediately gives me a "Failure: (tablename) doesn't match for this site" Error. Table detection did not work. Window does not match the table classname or the lobby process. You can Cancel this and try again, making sure that you actually CLICK on the table to give it focus. Detected window: $250 Gtd (32333338) Table

Detected window: shows table name correctly.

4- Slot size very large/small ; no, they are 4 table tiled size, pretty normal I would imagine, close to default size. Tried using default party size and a new layout

so, trying to make the layout again gives me a different problem than before but it still does not work, perhaps I could change some setting to get this to work?


Pokerstars -
Pokerstars hotkeys would work (fold in advance would not though), and it stacks/tiles seemingly correctly, but the tables do not pop to the front and I am timing out of them. Other sites seem to pop just fine.

Pacific Poker-
Modded, works nicely. Wish there was default PFR sizing option

I would really love to get this program working but I am having an extremely difficult time, any help is much appreciated.

Having a weird issue. I am 12 tabling and sometimes a table will not get recognised. I think it only applies to new tables.

From what I've seen the table will be placed somewhere either near the stack or another place. Although these could be due to stars auto placing them.

These tables will be ignored until I stack them in which case they will behave normally again. This happens maybe 2-3 times an hour for me so it's not a big issue but forces me to keep an eye out cos they appear out of my normal range of vision

well, i'm not exactly sure how zoom changes things. do the hotkeys work on normal ftp cash tables ? it all depends on whether the buttons are moved over slightly or in different locations to accomodate the fast fold button.



hrmmm.. this "button detected as black" message could be a problem. is the button truly black in your mod? are you sure that Aero is turned on and that you are using DWM scan mode within SaT?

yes, you can change some settings. you did a really good job including and excluding words to get it going. go to C:\Program Files\StackAndTile\Sites\ folder and you will see your custom ini file. open that and change/add these lines near the bottom:

these are the settings that i use for the build in party config which uses the lobby to assist in matching the tables. save the file and then restart SaT and then try to add the custom site

what table theme are you using in Stars?

if you change the Move To Grid setting to 'Action Required' and put one Stars table into the stack, does the table move out to grid at the correct time?

what is your New Tables setting? if you are putting New Tables into 'grid', and all grid slots are full, then SaT will have nowhere to put the table, and then it will just open wherever Stars puts it

I swear it used to queue up? So if it was full it would full the next empty space?

As I've been using this setting since I can remember and not had the problem until I updated from 2.0.2 to 2.0.6?

i thought that maybe i was mistaken and maybe this feature worked differently than i remembered, so i just tested it and checked the code. but unfortunately it doesn't work as you expect. if the grid is already full, then there is no where for the table to go, so it will stay where ever Stars opens it. i will investigate and see how difficult this might be to change, because i do think its a good idea. just hoping that it won't require a huge rewrite

Sorry if I made you doubt yourself Lol. Must have been some coincidence or stars placing the tables near the grid before or something.

Thanks for checking

Are there any known issues/tricks wrt getting Microgaming working for tournament tables? Seem to be able to get all the other sites working fine.

i know a few users have tried to get Microgaming working and as far as i remember, the results were mixed. what exactly is the problem you're having? maybe i can help you further

Hi guys,

I just started using stack and tile and I am having a problem with the program auto-registering me for other tourny's once my sit and gos have finished and closed out. What happens is as soon as I bust a sit and go, the program auto closes my table and then proceeds to auto register me for another sit and go of the same type.

I like the feature but I do not see anywhere in the software that gives me the option to turn set this feature on or off. Question....Is there any where where I can set this up to auto register me or not? Thanks in advance!

what site are you playing on?

are you certain that SaT is causing this? it should not be doing this at all. please try pressing Stop and see if this still happens.

Hi Greg

Do you know if Winner Poker (iPoker skin) is compatible with SaT? I have been using it for FT and PS, but for some reason my SaT doesn't recognise the winner poker table? I've looked in the FAQs and made sure my table settings were correct, but still having a problem. Any ideas?

btw - love the program!

iPoker should work... what do you mean when you say it isn't recognized? you included iPoker as a site within SaT? and you used a Winner Poker table for that setup? or did this setup fail?

Hi greg

The setup part failed. I will have the table up and I press F9 and nothing happens (I'm assuming it doesn't recognise a table?) I will keep trying to figure it out, not a massive issue as most of my volume is at stars.

can you type the error message that it shows? it will usually say the table name..

I seem to remember an option to send tables to the bottom on stack but can't seem to find it anywhere. Any ideas? Thanks

http://www.stackandtile.com/sat/help...vanced-options

Excellent thanks

Is there a fix for the bodog/ftp issue yet? I really only play a few tournaments a week on bodog so if be happy enough if there were a way to just make hotkeys work. As is I just ignore the tables or keep on grid, but I usually forget my hotkeys don't work so I click my raise or fold hotkey a few times before I realize and click the actual button.

no fix as of yet, i will look into using the lobby to detect the tables instead and perhaps that will work. that is what i do for the Party/888 conflict. i hope to get some time pretty soon to do some work on this

edit/
hrmm it looks like i've already made this change in my development version, but this just hasn't been pushed out publicly yet. so expect it to be in the next release

Hey Greg, ex snt user here. Played ftp mainly for a while there after it opened but looking to multi-site again now.

How is the software on the following sites these days?

888
Winning poker network (Blackchip etc)
Ipoker
Microgaming
Party
Ongame

Don't mind doing some tweaking my end again if necessary of course as with your help the last time it was very easy

Thank you!

Microgaming is not a built-in supported site so you would need to go through the Custom Site Wizard to include it

however Microgaming and OnGame would be the sites with the issues. i have had conflicting reports from multiple users saying that SaT no longer works on these sites (and also Revolution network). i have considered removing Revolution and OnGame from the built-in supported sites for this reason. i have not, as of yet, because the sites do work for some people. the problem is that these sites are somehow preventing SaT from scanning the table for colors, so SaT ends up either always thinking that action is required, or never thinking it.

unfortunately the only way to know is to test it and see if it works on your system