Because the built in one wasn't working for me either. I've been using SNT with the same stars setting for almost 2 years without a problem and only recently started having this problem (in the last 2-3 weeks or so) with stars. I finally got annoyed enough by it to try to change it and so far i'm not successful.

specifically what was the problem with the built-in PokerStarsBlack ?

if you post your entire custom config i can show you what to change. but i'd prefer to get the built-in settings working properly

The lobby gets resized and put into new tables slot with the rest of tables. I'd like to lobby to not be resized or put in my grid

are you certain this happens with the built-in settings? when you choose PokerStarsBlack from the Sites dropdown?

oh i just thought of something else... you said the problem started 2-3 weeks ago. are you using any other custom sites? also, what are all of the Sites that you have included for SaT?

btw there's a bug with Pokerstars betsize. I have concretely BetSize3 on "All in", and the advanced option to click bet button. Sometmes it will min3bet instead goin all in (as in, it doesnt press all in button before the other one) and result in a complete mess. Its hard to proof since it happens like 1 in 10 times of every of my all ins. It only happens on stars.. on FTP and microgaming (Where i use custom one) its working perfectly and never ever happened.

hrmmm... 1 out of 10 is a problem because that means its hard to debug. it means that usually everything is working correctly

i BELIEVE the problem is that when we click the 3rd Bet Size button on the Stars table, the Stars client is slow to update the betbox with the correct number, and then SaT is clicking Bet too fast, before the betbox has been updated from the 3rd Bet Size buttonpress

i will increase the delay that we wait before pressing the Bet button in the next version. that should help it

I'm using built in versions of Ipoker, Ongame, 888, Revolution_100_small

I'm using customer versions of PartyPoker, Full Tilt and Pokerstars.

Full Tilt and Party Poker were both doing the same thing using the default sites, but both have been corrected (mostly) with a custom site creation.

What weird though is that it seems even non-poker applictions are being resized. For instance, my TeamViewer window. On PokerStars, when i go to sit down at a table the buy in window get resized and put in new tables slow. The same thing happens on party for the pop up that asks you if you're sure you want to leave a table. Any suggestions?

yeah i'm pretty sure i know what the problem is.

i bet that it started as soon as you stopped using the built-in Party settings and instead used your Custom site.

Party tables use a very common classname in windows, #32770, and this is the same classname as the Stars lobby and many other windows and popups throughout windows. this is why you are noticing many other windows getting resized and put in grid. SaT is thinking that these are all Party tables. the built-in settings instead grab the tables based on the process of the Party lobby to get around this

i am surprised that you ran into problems using the built-in settings for FTP and Party. i recommend removing all of those custom sites, and trying all of the built-in settings for each of them first. then check if you're having the problems again. if you still get problems, tell me what the problems are and maybe i can address them. if i cannot, then i can at least tell you what to change in your custom site config files and you can try the custom sites again

After taking out all custom sites and reloading the built in sites, everything seems to be working fine again. Thanks for your help.

cool, glad to hear it. if you run into troubles, just post

I cannot seem to find where/how to cancel subscription. Where is that located on site
?

every month you should receive an email with your receipt. there are two links in these emails, and the bottom link is to "Manage Your Subscription"

http://www.stackandtile.com/sat/help...r-subscription

I tried out S&T for a month but was unaware I was signed up for a recurring subscription. I was just e-mailed saying I was billed again. I already cancelled the subscription via the link, may I please get a refund for the renewal that went through today?

of course, send an email to support (at) stackandtile (dot) com from your registered email address and ill take care of it

v 2.4.08

http://www.stackandtile.com/forum/sh...d=2622#pid2622

http://www.stackandtile.com/sat/

v 2.4.09

http://www.stackandtile.com/forum/sh...d=2637#pid2637

http://www.stackandtile.com/sat/

v 2.4.10

http://www.stackandtile.com/forum/sh...d=2655#pid2655

http://www.stackandtile.com/sat/

Hi Greg I have a question.

Say I have a grid of 2x2 (slot 1,2,3,4). Say I have slot 1 as the stack and I am using the move to grid after entering pot feature.

Say I have 5 tables in slot 1 (stack) and a table in slot 2 and slot 3. Currently, if the action is on the table in slot 2 all the tables in the stack queue up but don't come to the top of the stack. Obviously I would still want to act on the tables in the stack whilst tanking/deciding my action on the table in the grid.

Is there anyway to implement this? For example create an option so that tables in the grid are taken out of the detection process/queue or something.

Thanks
Ash

what you describe should happen already...

you can test it yourself :

turn on 'highlight active table', put a play money table in slot2 and just leave it there and play every hand so the table stays highlighted and active. put 2 tables into the stack and sit out on one table and use the 'send to bottom' hotkey to move the other table underneath. play on the table in slot2 and time down every decision so that the table stays active as long as possible. then, see if the table at the bottom of the stack pops up while the table in slot2 is active

if it isn't working, then my guess would be that something is wrong with SaT detecting that action is required properly. try switching to mode "when action required" and see if tables move from the stack and into the grid at the correct time.

Thanks for the reply.

Sat is definitely detecting action correctly already. I use a software which highlights the table requiring action which is why I am so certain. There are definitely certain times when there is a highlighted table in the middle of the stack whilst action is pending on the gridded tables. And definitely when I act on the gridded tables the highlighted take would then come to the top.

Maybe this only happens only so often which is why I made my assumption. Anyway its not a huge issue but a slight annoyance.

Thinking about it maybe the table just got stuck in the stack somewhere. I've had it in the past where I was just plain stacking many tables I would just use pokerstars function of activating the tables as I found sat unreliable sometimes.

Maybe it's something to test with more tables? But anyway like I said.. Not a huge issue

i have problems installing the latest update
every time i update i get an error message saying ignore, try again, or abort

win8

i have no idea what this other software highlighter does. it may do something different than what the SaT highlighter does

please test the way i described and see if that works or not.

do you have the option checked in SaT to "activate tables requiring action" ? how many sites are you playing on?

well, the Stars queue and SaT's queue are handled a little differently.

if you are still using only pokerstars function to activate tables, then that could be your problem. then this is a stars problem, not SaT. the stars function will act as you describe. a table requiring action in the grid will prevent any other tables from popping up until it is acted upon

when SaT handles it, the tables in the stack will pop up. thats why i recommend always allowing SaT to handle table activation, unless you have a specific problem that you are running into

close out SaT before trying to install the new version

I have tested the way you asked (just pokerstars) and it doesn't work. When the action is on a gridded table and then its the action on one of the stacked tables it doesn't pop up until I act on the gridded table.

I am running the latest version of SaT. I am not using pokerstars activate table feature, just SaT's in the advanced options so it seems SaT is detecting the tables correctly.

My play mode is Stack and Tile tables and move to grid is "after entering pot"

Yes the reason I used pokerstars activation was because I was having issues with SaT. I am aware not to use both at the same time and what they do.

well i tested it exactly that way too and it worked for me, so something is off between our two setups.

please try using 'action required' and see if the tables pop out of the stack and into grid at the correct time.

also, can you click File -> Current Layout and paste the whole file?