what you describe should work already

from your screenshot, it looks like you are using hyper simple theme. if so, then that is your problem. see here:
http://www.stackandtile.com/sat/help/pokerstars

solutions would be to either 1. modify the hyper simple graphics so that the pre-action fold checkbox is a different color than the Fold button or 2. use a different table theme

Is it possible to have more than 10 slots? and more than 1 stack? I have 3 monitors and it would be nice to have a stack on each

you can have as many slots as you want, but unfortunately only 1 stack. the program is designed so that the "stack" is meant to hold the non-important tables while all the other grid slots are for tables that you are involved in hands

Thanks, now it works ok

Hello. Don`t remember if I said thanks for "[x] activate table under mouse" update. In case I didn`t thank You

Now I have little problem with SaT. English isn`t my native language so I will try to explain it as I can.
I am tiling tables and when I am using SaT and sometimes when trying open some pop-up on HM2 that pop-up appears for 1-2 seconds, then disappears for same time and then again appears and it continues. This happens for those pop-ups when I just move mouse to certain stat (for example vpip) and there is special pop-up for that stat. This doesn`t happen when I press my mouse button on all stats and bring up the big pop-ups.

Also this is happening when in stars I try to change my rebuy settings at table when I am playing. I press that button where there is rebuy options and that pop-up appears for ~ 0.5 seconds and then disappears. Same is for smiley faces at stars chat. When I click on them they appear for ~ 0.5 seconds and then disappears.

Maybe some had some similar problems and this is problem on my end. I would like to fix that as it is bit annoying.

Not sure if You need any info about my setup but if You need just ask.
I was thinking maybe to record video how this is happening but not sure if this is necessary.

well if you are using the "activate table under mouse" then that is what is causing the problem.

"activate table under mouse" will bring focus to whatever table is under the mouse cursor. when a HEM popup appears or a Stars popup, if your mouse is over the actual table at the time, then the table will take focus away from the popup. when these popups come up, is your mouse directly over the popup itself?

likely if you turn this option off, you will not get this problem.

just curious... does this work on Winning (assuming I set up a custom definition)? Any known issues with SaT on Winning? Also any known issues with SaT with Cake2Lock predefined site template?

please see the help pages for any site specific issues:
http://www.stackandtile.com/sat/help...ll-poker-sites

it is working on Winning network, but Revolution has some serious issues. some people report that it doesn't work at all anymore. i think the site is doing something to prevent scanning of its tables try it and see, it works for some ppl

yeah that was the problem when I am holding my mouse on HUD stats then pop-up will turn on/off but if I quickly move mouse over the pop it doesn`t turn off.
with pokerstars rebuy options and smiley faces it is bit harder because their pop-up turns off super fast but I don`t really use them.
thank you again for fast answer.

hey greg decent software!!
only sometimes my 888 tables pop up while they dont need to pop up
if i turn off the setting on 888 that tables dont pop up when it my turn
the 888 tables dont pop up at all any sugestions?

is it possible or in the future that u can tile by stacksize?

rest props for this jewel
grtz pete

well, as with all poker sites and SaT, you should turn off the option within the poker site to "pop up the table when turn to act"

the reason is because, SaT handles all of this itself

now, if you are saying that 888 tables are not popping up at all from SaT, the first thing i would suggest is that you remove 888 from SaT and then re-Include it again. go through that setup. also check in Advanced Options and make sure you have the first setting turned on


unfortunately not at the moment because this is very difficult to program.

Just downloaded the trial, got everything somewhat set up and then tried to use it and it said trial expired. what's up with that?

perhaps you've trialed it a while back or something? not sure

give me your MFP ID from the Register button on the About tab and i'll get you sorted out

Reinstalled windows --> entered license key --> it says it's invalid/expired

Pretty tilting that I can't use it after starting my session, what do I need to do?

perhaps you've already used SaT on two computers (or same computer with different hardware configs)

just give me your registered email address and i'll reset your license

greg i have the same problem as MBK
i have a new cpu and now my key isnt valid anymore
ive send my email in a pm

greetz pete

you got PM

same, i just upgraded my cpu and am getting the message. Everything seems to work fine though, maybe because i only activated SaT on one computer. sending my email via PM so you can reset both of them.

done

Greg,
I've been having trouble today starting up my SnT. My internet connection is perfect (hooked up through ethernet) and keep getting message "Internet Connection error. Could not connect to the StackAndTile website, or the backup website either."

Tried restarting my comp as well, still no luck....any suggestions?
Thanks

this is just SaT doing a license/trial check with the database on the website. sometimes the website goes down randomly for a few minutes every now and then. i would just try again in 10-15 minutes and see if it works

Thanks, I'll give it some time.

can you visit the homepage of the website and click around some of the help links and see if it works? the website works for me, so if you still cannot access, then maybe there is a network problem somewhere

I waited 10 mins and tried again and works fine now. Thanks for the help!

Im experiencing some problems when running Intertops recently. Everything was running smoothly, than yesterday I think there was a software update for Intertops, ever since than whenever I run Intertops with Stack and Tile my tables never got back to the original tiled location. They just stay out there in the grid. Usually when I click "fold" they go back to their stack pile, but not recently. I tried removing Intertops from the included sites and than re add it but still the same problems occur. Any suggestions would be greatly appreciated as it is really affection my ability to grind on multiple sites.