I'm using a Logitech Cordless Wingman Rumblepad and I've used every other btn possible. I'll just keep reassigning the key on startup.

Fool,

TN works on stars.FR, and on stars.COM

But it won't recognise both clients when they're running silmultaneously, it'll just stick with the one you opened first / it recognised first.

Is there any way to tweak this myself so that it'll recognise both?

Is there a chance you could do a fix so that this could happen on an update in the near future? I've seen it asked about itt a few pages back but you didn't respond to that guy's question...

Thanks

I'm getting reports that part of the cap text is bleeding into the pot box on the classic theme at certain table sizes. We are working on this and will address it with a coming update. For now try changing the size of the table or switch to a different supported theme.



The problem is certain buttons aren't being saved correctly. For any of the gamepads we have worked on this is barely an issue as there is only one known button that works this way. The fix we have in test now may correct this but if its happening with every button it would probably be better to map your gamepad type. So far only 360 controller variations have been mapped.

Please send a copy of your TNLog file from a date since you started using your gamepad to support@alxsoftware.com. Also please link this post or copy it into the email. I'll get the rest of the information we need from you to make sure this is fixed.



I'm afraid this isn't currently possible and would require a separate .fr specific version of TableNinja as far as I understand. We may do something like this in the future but I don't have an ETA as its not currently under development.

I didn't read 7.3k posts, but does someone know how to create a sng sensei rule for husng where i can rematch instead of having automaticly à new table opened? Only when I decline or wait too long, sensei should open the next match.

Until now two sng open: one because of the rematch, one because of The sensei rule.

This feature isn't currently available though I'll be happy to pass the suggestion on to the developers.

TableNinja Version 1.2.117.0 -- Fix for multiple regional clients.


Hey guys,

We've fixed a problem caused by running PokerStars.com at the same time as another regional client. We've also added a warning popup alerting tournament players to a conflict between the "refresh info tab" feature and HM2's Street by Street HUD. Also included is a fix for the Sensei on PokerStars.dk and change to the way gamepad buttons are saved in your config.

Here's whats new in TableNinja version 1.2.117.0
--------------------------
New features
* Warn about potential conflict with tab selection
and Hold'em Manager 2
* Allow TableNinja to operate when multiple
PokerStars clients are running (TableNinja will
still only control one at a time)

Bug fixes
* Fix some gamepad hot keys not being correctly
loaded on startup
* Fix the SnG opener on the PokerStars.dk client
--------------------------

If you have any problems with the new version please post in the thread below and we'll be happy to help you:

http://tnforums.tableninja.com/showt...3838#post13838


Thanks,

Fool

Fixed build for regional clients with older versions of Stars.


Hey guys,

We've had to re-release 1.2.109.0 as 1.2.999.0 to prevent regular updates from overwriting this version. Its hard to be sure if there are still regional clients that haven't updated to the latest version of PokerStars. Most clients are using Stars version 5.429 or newer but for the few that aren't we've released this build.

The auto update system won't download this build. You will need to uninstall the version of TableNinja that you currently have and and re-install using the link below.

***Do not download this if your using Stars.com or any client that's newer than 5.429. You can find your version of Stars by going to PokerStars>Help>About PokerStars.***



http://tableninja.com/TableNinja_1.2.999.0.zip



Here's whats new in TableNinja version 1.2.999.0
--------------------------
New Features
* Re-release 1.2.109.0 for use with regional
PokerStars clients that haven't yet synced with
PokerStars.com

Issues
* This release will NOT FUNCTION CORRECTLY with
PokerStars.com; it is specifically being made to
allow those stuck with older PokerStars clients
to continue to use TableNinja
--------------------------


Thanks,

Fool

Reformatted laptop today and had to re-install TN.

When I click "automatically detect configuration" it tells me "Your language must be set to English in Pokerstars(R)".

I have checked the stars lobby and all is set correctly.

I'm probably missing something super standard but any help is appreciated...

FYI the 1.2.117.0 version fixed my gamepad issue.

Try going to PokerStars>Help>Show my settings folder. Make sure the path that shown matches whats listed in TableNinja>Setup. Let me know if this doesn't seem to solve the problem.



Glad to hear it. Let me know if anything else goes wrong.

Ive been having this problem for awhile and it's getting worse. 3-4 times during my session my raise x amount of BB button stops working. The value for example is .7 and assigned as my middle mouse button. All the other buttons works, but it will stop working for raising preflop to the default amount. Any fix for this yet?

It sounds like TableNinja is failing to read the pot but its tough to say why without more information. Please send a copy of the following files to support@alxsoftware.com and I'll check them over for errors:

1) Your TNLog and TNConfigAutoLoad files. You will find them in C:\Program Files\TableNinja

2) A screen shot of your desktop with a table and your HUD displayed. See instructions at http://www.iopus.com/guides/screenshot.htm. Please send the screen shot even if you don't have a HUD or custom table theme.

I'm trying to use TableNinja for hunsgs, but once i have both lobbies at the desired stake, TN keeps trying to reg for them making it impossible to play, is there any way to fix this?

"cycle to first in line" also a problem here.

Often seems to be when I'm facing a decision for all my chips. I stack my tables, single stack full screen - sometimes I know the table is out there somewhere, but it refuses to come to the front; I play with a gamepad (xbox360 fwiw) so I have to reach for my keyboard and play about with Alt+Tab until I find the table, which takes up far too much valuable time. Please fix this bug.

Thanks

TT

Try going to TableNinja>Sit-n-Go Sensei and make sure your "Seconds between cycles" is set to 60 seconds or higher. If this doesn't seem to help please send a copy of the following files to support@alxsoftware.com and I'll check them over for errors:

1) Your TNLog and TNConfigAutoLoad files. You will find them in C:\Program Files\TableNinja

2) A screen shot of your desktop with a table and your HUD displayed. See instructions at http://www.iopus.com/guides/screenshot.htm. Please send the screen shot even if you don't have a HUD or custom table theme.



We recently released a fix for an old problem that happens when someone goes all-in before you on the first hand of a table. The table isn't detected and and TableNinja doesn't activate it. I'm not sure why the fix isn't working but I'll let the developers know and see what can be done.

Not sure it's of much help, but my cycle to first in line hotkey is still buggy after the latest update/fix too.

Happy to send more files etc if desired.

I need to reg the new lobby right away after i get a game, so i'm afraid this would not be a sufficient solution. Is there no way for TN to not try to register for sngs you are already in?

Me too since 2 days.

hey guys how can i fix table ninja ?
if i want to raise lets say 3x bb it just minraise and i have a red " dont cover this " error...

Try switching to an Aero based Windows desktop theme. Then go to the start menu search and type "performance information and tools", without the quotes, and hit enter. In the new window that pops up click the adjust visual effects link. Choose custom and make sure everything is disabled except the following:

enable desktop composition
enable transparent glass
show thumbnails instead of icons
smooth edges of screen fonts
use visual styles on windows and buttons

Also make sure UAC is disabled according to the following instructions:

http://faq.holdemmanager.com/questio...UAC+(Windows+7)

http://faq.holdemmanager.com/questio...Off+UAC+(Vista)

Let me know if that doesn't seem to help.



If you have "sorting optimization" disabled the Sensei starts at the top of the lobby and works down. Normally this wouldn't be an issue as the "target number" should match the "Max per cycle" and the "seconds per cycle" would be longer than it takes for a tournament to start. If you have the Sensei set to scan the lobby almost constantly though it may have to skip games you've already registered for. Let me know if I've misunderstood the problem.



Usually this would mean your using one theme in PokerStars but have another set in TableNinja>Setup. If this isn't the case please send a copy of the following files to support@alxsoftware.com and I'll check them over for errors:

1) Your TNLog and TNConfigAutoLoad files. You will find them in C:\Program Files\TableNinja

2) A screen shot of your desktop with a table and your HUD displayed. See instructions at http://www.iopus.com/guides/screenshot.htm. Please send the screen shot even if you don't have a HUD or custom table theme.

I have tried enabling and disabling sorting optimization. To make it more clear: there are only 2 lobbies at husngs, if these are full there WILL NOT spawn new ones. I set my target number at 8, so TN will reg the 2 people currently sitting, and sit me in the two new fresh lobbies bringing my total up to 4. At this point TN still wants to reg me but there are no open lobbies, only the ones i'm currently in.

I have the seconds between cycles set to 0 though, since it is completely random how long it takes for me to get action, but i need it to register as soon as i get action.

Sorry I didn't read through the thread but someone else mentioned this problem too. I keep automatically sitting out after playing the BB. This costs a lot in the long run, how do I fix it please???

After uploading pokerstars.eu my table ninja does not work. I uploaded 1.2.999.0 version, but:

1. TN does not recognize my PS theme

2. TN cannot detect my PS settings folder (it does not show any path; when I try to detect it mannually I cannot find the folder shown after clicking ps>help>open my settings folder)

Figured out how to find new settings folder, most options are working OK, but the biggest issue for me is that ps bet box does not show default bets sizes

How about refund, i lost probably 1k$ becase of this ****, before figured out problem?