Oh I didnt take a seat, i got it to work now, great program!

i have an idea of how i was going to accomplish it, which was to scan for the existence of flop cards. i just havent gotten around to it. is that what method you used? of course i'm curious as to your solution, but in case this program ever goes commercial and i sell it, i dont want to be obliged to owe anyone anything, if thats a concern for you or not

i would just use another hotkey program such as TableNinja, or another AHK script such as BetPot or StarsCash, and let them handle the betting hotkeys.

for example, in SaT you might use these hotkeys:

f - fold+stack

and in TableNinja you could set up these hotkeys:

c - call
a - bet pot
s - bet half pot
etc whatever you like

Very good. Thank you.

Are there any conflict issues I should be concerned with running any of these with SaT? The obvious one is not duplicate hot-keys. Is that about it?

well it depends on what you have SaT doing. for example, in 'preflop' mode, where tables move as soon as action is on you, then you only need to worry about SaT doing the re-stacking, so the configuration i gave as example will work fine

if you are using 'vpip' tile mode, where tables move only after you take an action, then if you want to use hotkeys for 'call' and 'bet', then SaT will need to know to move the tables into grid during these. in that case, youll need to correspond 'external vpip hotkeys' in SaT to match those hotkeys you set up in the other program

Hi, I'm having difficulty getting SaT to work with Pokerstars and FTP. Let me know if I've done anything wrong configuring my settings:

I added Pokerstars Classic and FTP in the sites tab. In the settings tab, I selected 1 stack slot and "grid" in new tables slot. I set 18 table slots and the grid configured without errors. Tile settings on never. Hotkeys sent to send to active table. In advanced options I checkmarked the "Activate table on move to grid" and "bring urgent tables to top." I then disabled popup user action in the pokerstars and FTP lobbies.

The tables load fine. The grid resizes them perfectly. But the tables doesn't steal attention from each other. I fold on one, and the next table with action just fades and blinks, but I'd need to manually click it for the hotkey to work. Any ideas?

hrmmm, the only idea i have is that sending hotkeys to active table instead of table under mouse, that feature wasnt heavily tested, because most people didnt use it. i take it you want to play without using your mouse?

1.99.17
extended to jan 31

is there a way that i can disable/enable the app with a single key click?
like disable hotkey.
there is propably a function like that somewhere, i am just too dumb to see it.

btw great app m8. just add an sng opener for stars and you have a killer one in all solution for the daily grind

sorry, not yet, for now you have to use the start/stop button in the program. this was requested and its on the to-do list

Greg, are you in for the long haul with this project as your main rival has just thrown in the towel. (he says that's due to there being a smaller user-base than expected so this isnt intended as an untoward comment against him, rather an open ended question to you).

This app is the best! Thank you! Please continue with it!

dunno what it means to "be in for the long haul". i saw his comment, i dont really consider anyone as rivals. TOI was a good program and Thois is a good guy, we talked a bit about his userbase as well.

the problem is exposure, i think these programs would have a decent market, but getting the word out to the masses is the issue. but its a tug of war in my mind, cause i dont really care to support a million users.

At $50 a pop why wouldnt anyone want a million users?

heh i was thinking of just selling it with no support offered at all, and if ppl dont like that they can choose not to buy

hi , tried to download it , but i´m gettin an error form winrar that the zip file is damaged...
ty

Under include sites it has lot of pokerstars table themes but doesn't include a tiltbuster mod i.e. Battlestar theme from Tiltbuster

Is it easy/possible to add this so I can continue using this amazing table theme while using this program?

thanks for the great product

shouldnt be any problem, no one else has reported it. its the same file thats been up for months now

shouldnt be too big a problem. of course you could try one of the standard stars themes and see if it works. the buttons might be close enough that they match. one problem could be if your fold button is black, that has caused issues in the past.

if you want to set up your own custom config for this theme, under the /Sites directory, run the CustomSiteCreator.exe and follow the steps. at the end it will ask you to save the .ini file, just put it in the same /Sites directory. after that when you start SaT, your custom .ini should be in the drop down for IncludeSite

[QUOTE=greg nice;24295057]
i have had the same problem i used S&T for 1 or 2 months and downloaded v17 and was using it for about a week when kaspersky put up a trojan alert and i panicked and hit the fix it button and when i looked to see what the trojan was it was S&T
i tried to use v14 that was still on my computer but it instucted me to download v17
when i downlod v17 i get a message that the zipped folder is invalid

First let me apologize for asking something that I am sure is cleverly hidden in this 100+ page thread but searching for tiling and stacking and ftp in this thread is pretty useless. I did try.

Anyway. Here is what I am trying to achieve. I usually play between 10-16 tables on FTP. I have set a grid of 6 tables, 3col, 2 row, I would like all the tables to stack in slot 1. When there is action called for on a table I would like to come out on the grid. When action is done go back to stack.

Is this possible. I have tried all the tile settings but to me all the tables stay in their place on the grid except when there are more than 6 tables open then slot just works like a stack and brings the table to the front of the stack and does not move it to the grid. Maybe there is something I am not understanding.

I actually started out this process just looking for a script to give the FTP commands of tile and stack windows a hotkey. Then I found you toy, and now I just confused

Thanks for any help,

Z

[QUOTE=billesmith1;24297071] thanks , it was kaspersky!

Stack Slot = 1
Tile Setting = preflop
Hotkeys for "bet+restack, call+restack, fold+restack"

so the tables are going to grid properly? or do they just start out in grid? if they start out in grid, its because you probably have

New Tables = grid

try changing it to

New Tables = slot1

then all tables should go to your stack upon start up. then see if they correctly move to grid when action is on you. if they do not, then you've set up fulltilt incorrectly during Include Site, youll need to go back and remove and re-include, paying attention to the fold part.

if the tables do correctly move to grid on your action, then you probably just need to set up some hotkeys to send the tables back to the stack

How can we get that WAIT FOR BigBlind checkbox turned off?

I tried various settings in PS client and Table Ninja and Stack and Tile, and yet when a new table is opened, or I sit back in, this is checked by default. Any ideas?

[QUOTE=Lonskar;24299817] were you able to get S&T past kaspersky?
if you did, how did you do it?
i'm still unable to install it

dunno, SaT doesn't do anything with this. perhaps ask if TN guys can help

try just turning off your scanner, or add an exception to allow SaT

I recently move my game to Ps, and im having some issues.

i have tile setting : Preflop

Tables are moving to grid as soon as i receive cards, and not when is my turn to act. If the table moved to grid, then it wont restack if i use (FOLD+stack table). It will click the Prefold button, but it wont stack. It will kick right back into the grid, as if i needed to act on the table.

Just to be clear, If the FOLD button appears, then yes, everything works. But because tables are moving as soon as I receive cards, then its occupying a slot until the FOLD button appears.

I would like to see the table move into the grid only if i have an immediate action , or make it possible to prefold and stack the table.

I know I can do this on FTP. what am I doing wrong ?