Open Side Menu Go to the Top
Register
StackAndTile StackAndTile

06-29-2010 , 09:18 PM
that does work, however it doesn't tile tables
using preflop setting and nothing happens when a table requires action, just sits in the stack

Last edited by aesthetics; 06-29-2010 at 09:23 PM.
StackAndTile Quote
06-30-2010 , 02:25 AM
good work greg what do you think of having the option for 2 grids one for pre flop one for post?
StackAndTile Quote
06-30-2010 , 08:57 AM
The tables don't resize properly. How can I fix this please ?

StackAndTile Quote
06-30-2010 , 08:07 PM
Quote:
Originally Posted by DamienT
The tables don't resize properly. How can I fix this please ?

http://www.stackandtile.com/sat/?q=node/5
StackAndTile Quote
07-01-2010 , 07:22 AM
Thanks a lot !
StackAndTile Quote
07-01-2010 , 08:31 PM
hi greg,
i just want all tables to be stacked, some important tables i want to move manually around. no need for for your script to process any hotkeys or such.
how do i do this?

thx
StackAndTile Quote
07-02-2010 , 12:32 AM
Quote:
Originally Posted by Dint
that does work, however it doesn't tile tables
using preflop setting and nothing happens when a table requires action, just sits in the stack
then either your fold coordinate in your ini file is wrong (unlikely since you say that use_basic_click now folds correctly), or during site setup, you didnt press F10 when the fold button was visible

Quote:
Originally Posted by r0eKY
good work greg what do you think of having the option for 2 grids one for pre flop one for post?
hrmmm.. a brief brainstorm seems like it would be difficult to do, and i'm not entirely sure of the usefulness. feel free to convince me


Quote:
Originally Posted by TTR
hi greg,
i just want all tables to be stacked, some important tables i want to move manually around. no need for for your script to process any hotkeys or such.
how do i do this?

thx
use Tile Setting: Never, and set up a 'Manual Move' hotkey
StackAndTile Quote
07-02-2010 , 08:24 PM
I tried a session using both PokerStars and FT yesterday, as well as TableNinja and TableNinjaFT. I managed to get around hot-key problems by using x-padder to press two different buttons at the same time.

Anyhoo, the only downside with this is that it requires having separate stacks for PS/FT because occasionally you'd be acting on a table from one site, and boom a table from the other site would steal focus and you'd make the action you intended for the table underneath.

If I was to start using this problem, would it allow me to have one stack without any problems like this, and could it work alongside both TableNinjas or would it conflict?

Cheers,
James
StackAndTile Quote
07-03-2010 , 05:07 AM
hi greg, I have tried it and it works very 'nicely'

Will the 'Set Table Aside' feature in Table Ninja do the same thing?
StackAndTile Quote
07-03-2010 , 04:14 PM
So I've been fiddling with the software...

Had it set so the tables never tiled, and just had one stack. But couldn't get rid of the focus steal problems. You can be acting on a hand on the most urgent PokerStars table, whilst the most urgent FT table pops infront of it and the PokerStars table will never regain focus.

Is there anyway to set SaT to queue the tables from both sites in order of urgency in a stacked format?

Cheers again,
James
StackAndTile Quote
07-03-2010 , 05:08 PM
mhhh, sweet, but i have some trouble when PS and FT tables need action. I have even more trouble when tables need action + new tables come up.
I tried to run TN + TNFT with different kind of settings, but it doesn't work so far.

ideas?
StackAndTile Quote
07-03-2010 , 05:59 PM
Quote:
Originally Posted by theMBK

Anyhoo, the only downside with this is that it requires having separate stacks for PS/FT because occasionally you'd be acting on a table from one site, and boom a table from the other site would steal focus and you'd make the action you intended for the table underneath.

If I was to start using this problem, would it allow me to have one stack without any problems like this, and could it work alongside both TableNinjas or would it conflict?

Cheers,
James
should work alongside TNs with no problem. please describe the hotkey problems you are having in more detail so i can help you fix it

as for two stacks, thats wrong, you dont HAVE to do that if you dont want to. the sites popping up in front of each other is a problem, yes, but in both Stars and FTP, you can turn off this option so that it doesnt happen



Quote:
Originally Posted by betweaver
hi greg, I have tried it and it works very 'nicely'

Will the 'Set Table Aside' feature in Table Ninja do the same thing?
not completely sure what this function does in TN, so i couldnt tell you


Quote:
Originally Posted by TTR
mhhh, sweet, but i have some trouble when PS and FT tables need action. I have even more trouble when tables need action + new tables come up.
I tried to run TN + TNFT with different kind of settings, but it doesn't work so far.

ideas?
i saw your vid. i would suggest you turn off the same option as i recommend for the guy above. in stars its under Advanced Multi Table Options and in FTP i think its in the Options menu in the top of the lobby. that way both sites will not pop up their individual tables when action is required.
StackAndTile Quote
07-03-2010 , 06:25 PM
Quote:
Originally Posted by greg nice
in stars its under Advanced Multi Table Options and in FTP i think its in the Options menu in the top of the lobby. that way both sites will not pop up their individual tables when action is required.
When I turn off those options, the tables don't pop up anymore and I have to manually find tables on which I have to act.

I'm sure there is a way to fix this problem but I can't find it..
StackAndTile Quote
07-03-2010 , 06:26 PM
thx i will try,

btw is it possible to have the (main) stack larger than the other slots?
and
is there a way to not treat replayerwindows like tables?
StackAndTile Quote
07-03-2010 , 09:29 PM
Quote:
Originally Posted by DamienT
When I turn off those options, the tables don't pop up anymore and I have to manually find tables on which I have to act.

I'm sure there is a way to fix this problem but I can't find it..
if you have included both Stars and FTP in SaT, then SaT should handle this for you.. is it not working?
StackAndTile Quote
07-03-2010 , 09:31 PM
Quote:
Originally Posted by TTR
thx i will try,

btw is it possible to have the (main) stack larger than the other slots?
no, not possible at the moment
Quote:
is there a way to not treat replayerwindows like tables?
yes, its possible to fix, what site ? what is the title of the replayer window?
StackAndTile Quote
07-03-2010 , 10:27 PM
Quote:
Originally Posted by TTR
is there a way to not treat replayerwindows like tables?
this happens to me too, on PokerStars.
StackAndTile Quote
07-03-2010 , 11:19 PM
Quote:
Originally Posted by greg nice
i saw your vid. i would suggest you turn off the same option as i recommend for the guy above. in stars its under Advanced Multi Table Options and in FTP i think its in the Options menu in the top of the lobby. that way both sites will not pop up their individual tables when action is required.
fired up couple of sngs just fulltilt. its a pain. "display table in action" was enabled.

the replayer window title is "TID Table - BB/SB Ante - Game", but meanwhile im okay with moving to 'new table slot'

Code:
288505269 1 - $150/$300 Ante $25 USD - No Limit Hold'em
StackAndTile Quote
07-03-2010 , 11:55 PM
hey greg,

what's your plan with this software? have the number of users been growing steadily since you released it? do you plan to take it commercial? if so, when and how much will it cost?

any new features planned?

also, is it possible to get more than one stack slot? I want a grid on one monitor for tables that don't require action and a grid on the other monitor for tables that do require action.
StackAndTile Quote
07-04-2010 , 08:06 AM
Quote:
Originally Posted by DamienT
When I turn off those options, the tables don't pop up anymore and I have to manually find tables on which I have to act.

I'm sure there is a way to fix this problem but I can't find it..
I thought this was the case, but it turns out it was because I was playing the tables as "new tables". Once you get the classified as "stacked tables" then it works!

After a Play Money trial session of stacking PokerStars and Full Tilt tables together it's looking good. It's not the smoothest thing in the whole world, it seems like it sometimes takes two attempts for a table to gain focus which means it stutters occasionally, but other than that it seems to work well.

Will report back after my session today
StackAndTile Quote
07-04-2010 , 08:48 AM
when i am in the BB & someone in front of me goes all in, the table stays in the stack instead of moving to a slot.
StackAndTile Quote
07-04-2010 , 10:19 AM
Quote:
Originally Posted by TTR
fired up couple of sngs just fulltilt. its a pain. "display table in action" was enabled.

the replayer window title is "TID Table - BB/SB Ante - Game", but meanwhile im okay with moving to 'new table slot'
what was a pain? did you try turning of the setting and seeing how it went?

ill look into both stars and ftp replayers when i have time

Quote:
Originally Posted by Fermion5
hey greg,

what's your plan with this software? have the number of users been growing steadily since you released it? do you plan to take it commercial? if so, when and how much will it cost?

any new features planned?

also, is it possible to get more than one stack slot? I want a grid on one monitor for tables that don't require action and a grid on the other monitor for tables that do require action.
plan has been to go commercial, but obviously i'm slow and busy with other things at the moment, so everyone continues to get to use it for free no idea about number of users, i cant tell if people just download it and run it once and never use it again

new feature i'm working on is click detection for VPIP and Fold buttons, TOI has had this for a while and i think its useful to add, so you wont necessarily have to set up Fold+Stack and VPIP hotkeys if you don't want to, the program SHOULD just detect the button click

re: two stacks/ two grids, no plans for that at the moment. two things above are priority and they barely get worked on

Quote:
Originally Posted by theMBK

Quote:
Originally Posted by DamienT
When I turn off those options, the tables don't pop up anymore and I have to manually find tables on which I have to act.

I'm sure there is a way to fix this problem but I can't find it..
I thought this was the case, but it turns out it was because I was playing the tables as "new tables". Once you get the classified as "stacked tables" then it works!
yes, this is important. if you're new to the software, realize that the default settings when you press Start, the tables do not get stacked in the normal sense automatically. first they are moved to the 'New Tables' stack. this stack is a placeholder to allow you to take seat, buyin, sitout, wait for blinds, whatever without clogging your grid. you then need to manually send each table to the main stack to begin urgent table detection. then, for example, if you get on a waitlist and get a seat in the middle of your session and the table pops up, it will be moved to the New Tables Stack, so that it wont block your other grid tables and will allow you to take your seat.

Quote:
Originally Posted by betweaver
when i am in the BB & someone in front of me goes all in, the table stays in the stack instead of moving to a slot.
what site, are you certain you set up the Fold correctly during site setup? etc
StackAndTile Quote
07-04-2010 , 10:42 AM
Quote:
Originally Posted by greg nice
what was a pain? did you try turning of the setting and seeing how it went?
tables fighting for focus, like in the vid but much worse. since it was all fulltilt and several sngs down to 2-3-4 players. and yes i had the above option disabled (sorry for the mistype).
StackAndTile Quote
07-04-2010 , 08:07 PM
Quote:
Originally Posted by theMBK
After a Play Money trial session of stacking PokerStars and Full Tilt tables together it's looking good. It's not the smoothest thing in the whole world, it seems like it sometimes takes two attempts for a table to gain focus which means it stutters occasionally, but other than that it seems to work well.

Will report back after my session today
Unfortunately once you hit 8+ tables it becomes impossible to use. Like TTR mentions the tables are just fighting back and forth to steal focus, and it seems occasionally one will miss out on action, and timebanks were happening all over the place once it got to 12+.

Any chance this can be ironed out? Because it would be soooo awesome if it worked smoothly...
StackAndTile Quote
07-05-2010 , 02:15 AM
Quote:
Originally Posted by betweaver
when i am in the BB & someone in front of me goes all in, the table stays in the stack instead of moving to a slot.
Quote:
Originally Posted by greg nice
what site, are you certain you set up the Fold correctly during site setup? etc
PokerStars. It has done it quite a few times. I did as you suggested and re-setup the Fold again. Reading the instructions the second time I wondered if had I sat in before pressing F9, or not. This time I made sure I was seated before pressing F9 to get the size of the table. I will let you know how i get on.

I have played two 3 hr sessions, 24 tabling and that is the only hiccup. Everything else works perfectly.
StackAndTile Quote

      
m