Yes, in that case the tile setting is : vpip

Same here, tables glitch like crazy all the visuals dissappear/appear randomly, im using party modern config.

Not quite.. I think he means if it goes to the flop. vpip goes to the grid as soon as you check or bet regardless of whether you go to the flop or not.

Anyway to answer the question I don't think SaT has this function although it sounds good..

the program will not move when the action goes to the flop, it used to do this and was removed, but will likely return in the future

but, if you want it to move when you raise on the button, you can use Tile Setting: VPIP, and the tables will move into the grid whenever you raise or call before the flop. this should do the job that you want for now.

i still cannot test on party. i've tried to create my 3rd account on partypoker.net but it doesn't allow me to log in. tell them to get their **** together

v 1.99.17

- changed: alternate_scan removed, now uses ScanMode in advanced options. win vista/7 users should enable Aero theme and use SaT ScanMode 'DWM' for best performance

- fixed: gui sometimes not appearing
- fixed: external vpip hotkeys now only move table in vpip mode
- fixed: custom site wizard no longer "attaches" poker table, just moves it next to the wizard
- removed: check during Start for stacking hotkey

http://www.stackandtile.com/sat

**anyone who was experiencing lag on 20+ tables, please use Aero theme in windows and try ScanMode=DWM in Advanced Options, and report back if the lag is gone or not.

I'm on FTP and im experiencing tons of glitchy graphics, the tables look messed up visually from the bottom and right side.

I went to the settings/configure grid and set it to fit 9 total slots, 1 in middle then 2 3 4 across top 5 and 6 in middle and 7 8 and 9 on the bottom so I expected my first table would be put in the middle, but that wasn't the case. Also I want the middle position to be where the main 'stack' is and the outside tables to be the tables of interest.

Is this possible to do with this software?

could be due to the new update, you are using 1.99.17? if anyone else runs into this, please report

yes. you need both StackSlot and NewTables = 1

So sick. Thanks!

I'm using Windows 7 and just to mention I had to re-add my custom site for this scan mode to work. The urgent tables wouldn't pop to the top but seems fine now. Thanks for the update.

I know we've been harping on about it for a long time but about the stack at of hand feature there should be an option for length of time before stacking. So its up to the user whether he wants an insta stack or a few seconds to see the results of the hand. Just a thought...

Cheers Greg

there is no stack at end of hand currently.. but looking into it

Yes I realise its not implemented yet but was just mentioning for when you have time to look at it. Cheers

I see why certain tables are gettin all blurry with messed up graphics. First 9 tables open up so it fits 9 tables tiled across the monitor, then the tables that open up after that are openin up on PS as a bigger size, so when your program resizes and puts them into the stack at a certain size, it gets distorted.

I seem to have it working otherwise other then that glitch.

Is there a way to have tables that are in the stack be moved out of the stack if I do ANY action other then fold? I have it setup so I can fit total 9 tables total on the screen (so 8 tables available for any tables of interest around the central 'stack').


Is there anything setup so if you have a table your sitting out at which is in the stack - for that to be moved as a table of interest? As of right now that table will just sit in stack and I'm unable to get to it w/o difficulty.

thanks!

Just a tip to anyone using Microsoft Security Essentials. Make sure you exclude the process from being scanned under the settings tab.

I forgot to do this for the new download and tables were spazzing all over the place and I thought it was an SaT bug... tilted and cost me a lot until I figured out what was wrong.

oh, i thought you said hte graphics problems were on FTP. since its on stars, it should be a simple fix:

http://stackandtile.com/sat/node/5


yes, use Tile Setting = VPIP. but how do you take your actions? do you use hotkeys or click the buttons with your mouse? if you just use mouse, then enable Left Click Detection in Advanced Options. otherwise set up Bet/Call hotkeys

coming soon

thanks. what exactly is it scanning for? or what is it detecting that SaT is doing?

Not sure what exactly its scanning for but its to do with its realtime scanner. It really slows things down and made SaT quite slow and not pop up urgent tables at right time and would pop up tables as I was about to click etc. Excluding the process made things a lot better.

Just an update on the issues I was having. Now I'm using SaT's hotkeys I'm not having any issues with the wrong table popping to the grid anymore.

However, I'm still having the problem that stacking the table from the grid would go on top of the stack. I'm not sure what exactly causes this as this definitely doesn't happen everytime. I think it happens a lot more regularly when I am playing 12+ tables and the cpu usage is higher. Any clues?

Updated to the latest version and am having some issues. When I have tables in the stack, they automatically cycle to the top. When I have tables in the grid, these tables alternate between each other, popping to the front and stealing focus. Currently, the program is unusable for me.

FWIW, I am using Win7. I have tried with the new DWM mode as well as the other mode, and neither works properly.

hi all,

is there a way to run the program on a pokeroom that don't popup the table when action is required?

thank's

Im getting utterly nowhere when i try and sort this out ..

Im going to spend the rest of the day if required to get this to work

All im looking for in the following please on ipoker.

One stack or can i have two ? where all the tables go and then maybe a grid with 4 table slots .. and then when i have a decision to make on a table .. that table goes into the grid.

Once ive made that decision it returns to the stack ..

Ive started the set up wizard, selected use all monitors ( i have 2 ), put in the width and height of the tables, selected auto fill screen and saved config.

In Control .. i now have stack slot 1 and new tables slot = grid .

Grid = total slots is 8 and tile setting is Preflop

If i select config .. i now have 8 slots shown .. although i can only see numbers 1,2,5 and 6. .. these are on my right sided monitor.

Im now trying to include a ipoker site but cant see a ipoker option on the sites page.

I know im a numpty when it comes to things like this ... .. but with some advice i hope to get this up and running today

Thanks

no idea man. ill look through the code again

did you start with a fresh config? if not, can you try removing and re-including your sites?


of course, SaT will handle popping the tables up for you

i'll help you

SaT only supports one stack

so you dont want the table to remain in the grid for the entire hand? if you just want to make your decision and then go back to the stack, then the same table will be popping out multiple times since each street you will have to act again. in any case, if this is what you want, youll want to set up "Fold+Stack", "Bet+Stack", "Call+Stack" hotkeys

all sounds good
where are slots 3,4,7,8?

there is no built in option for iPoker since i live in the US and cannot test. what you will need to do is run the CustomSiteCreator.exe program in the /Sites directory, which will create a new iPoker configuration for your pokersite. the setup for that is a bit more complicated, but give it a shot and if you need help ill try to help


no worries, i appreciate all the detail you've given, it makes it easier to help

Thanks for the reply greg ..

So is it better to have say .. one stack and 6 slots in the grid and keep the tables in the grid untill the hand is finished ?

If thats the case ive removed 2 slots and now have 6.

Again if i go to config grid .. i only see 4 slots numbering 1, 2, 5 and 6 ..im trying to select 3 so i can move it ... but nothing is coming up.

Good question . .. they where allong the bottom but when i clicked on them they would not show .. i thought they where behind the other slots but i was wrong.

I will also have a go at trying to configure ipoker.

I'm Using SaT on FullTilt without problems ... but I can not get it to work on a web based poker room..

That's the Config ini (Dollaro.ini):
That's the Site ini (Dollaropoker.ini)
to create both of these ini files I used the wizard...

as it is more than a month that I try to make the program work on this poker room, i want to know if it is possible that SaT does not support some poker room...in this case a can stops trying to configure it
What are the poker room minimum requirements ?

Thanks

lets get you up and running first and then you can decide how you want the tables to move back to the stack if the hand is finished or not.

if you click the File menu, it will tell you "Current config: ", copy and paste the text in that file into your next post and ill have a look where these other slots are