Hey Greg,

took me some time but I was able to set everthing up on my Windows 10 Laptop and so far it seems like it is working fine. I gave it a shot with 3 tables each and encountered no real problem. Only one thing bothers me right now. Lets say there is a hand where I am involved and the pot is getting big and I end up folding the hand either preflop, on the flop or whenever and the hand still goes on. In this instance the table went back into the stack slot as it should be but there was another table above and even though I klicked on the table I wanted to see but was no longer in the hand on the task bar I was not able to see that hand, I was not even able to bring it on top at the stack slot. Is there a chance I can watch a hand unfold that I am no longer involved?

Right so if you click Fold with your mouse, or if you used a Fold+Stack hotkey, the table would move back to the stack. If the rest of your grid slots are full, then SAT will be bringing the tables that require action to the top of the stack, so that you can see them. So you won't be able to bring a different table to the top. If there were no other tables requiring action in the stack, then you should have been able to bring it back to the top of the stack by clicking the taskbar icon.

There are a few workarounds. You could set up a simple "Fold" hotkey, instead of "Fold+Stack", in that case the table would remain in grid. Another solution would be, if its a big hand, or an important table like a final table of a tournament, you could use the "Keep table in grid" hotkey, which would force the table to never go back to the stack, unless you toggle that hotkey again.

Another solution is to use the "Cycle Stack" hotkeys, those will allow you to cycle through to other tables in the stack, even if the top table requires action.

So those are the workarounds. If you have another idea of what you'd want to happen, let me know and I can see if its possible or if not, if I can build it

Does SaT work on pokerbros with android emulator with the custom site function?

Hey greg,

I tried to install StackAndTile today. Everything appeared to go smooth, however I was never asked to fill in a trial e-mail? I just installed it from the website, and got immediately redirected to the application, where I could set up my configuration?

Edit: I used stack & tile once in 2013, but have no idea what e-mail account I used back then. Machine ID is 65EC23967916F8FD.

Perhaps worth mentioning that I have had multiple computers since then too.

Oops sorry, it only asks for an e-mail when you press start

one user told me they got it to work with very basic functionatliy.. i can't gaurantee it

ok let me know if you have any problems

Any chance we can get a "FOLD NOW" feature for blitz poker on ACR?

The Fold hotkeys should already work for that. If its not, please click File->Current Layout, and paste me everything

[settings]
table_width=973
table_height=572
total_slots=5
slot1x=0
slot1y=0
slot2x=947
slot2y=0
slot3x=0
slot3y=468
stack_slot=1
newtables_slot=4
move_to_grid=never
oldtables_duration=5
oldtables_slot=1
scan_mode=DWM
play_mode=SaT
slot4x=947
slot4y=468
activate_most_urgent=0
activate_table_under_mouse=1
highlight_active_win=0
move_mouse_to_most_urgent=0
move_mouse_if_not_over_table=0
left_click_detection=1
stack_when_clicking_call_or_bet=0
stack_table_at_end_of_hand=0
drag_drop_swap_slots=1
minimize_to_tray=0
show_table_count_while_running=0
show_actionreq_count=0
show_session_timer=0
show_random_number=1
move_888_popups=1
close_bovada_popups=1
stars_include_logged_in_as=0
notify_new_tables=1
notify_old_tables=1
notify_keep_in_grid=1
notify_ignore_table=1
notify_move_to_grid=0
notify_end_of_hand=0
notification_duration=3
hotkeys_fire_on_release=1
allow_action_hotkeys_on_ignored_tables=1
click_bet_for_allin_hotkey=0
click_bet_for_betsize_hotkeys=0
click_bet_for_betxbb_hotkeys=0
click_bet_for_betpot_hotkeys=0
also_keep_in_grid_when_move_to_slot_x=0
fold_checkbox_setting=Fold
also_stack_table_for_betsizeX=0
also_stack_table_for_allin=0
focus_betbox=0
detect_hidden_windows=0
auto_accept_stars_waitlists=0
click_stars_info_tab=0
slot5x=455
slot5y=245
[general]
show_walkthru=0
gui_x=2232
gui_y=442
last_tab=
filename=1812.ini
is_reloading=0
version=2.99.06
win_ver=10.0.18362
v29905_msg=0
dpi=96
v=fu
[sites]
number_of_sites=1
included_sites=WinningPoker_L
WinningPoker_L_included_executable_path=C:\Users\P ublic\Documents\AmericasCardroom\AmericasCardroom. exe
WinningPoker_L_included_resized_table_width=973
WinningPoker_L_included_resized_table_height=572
WinningPoker_L_included_fold_color=0x3d3cd4
WinningPoker_L_included_call_color=0x3d3cd4
WinningPoker_L_included_bet_color=0x1919a2
WinningPoker_L_included_scanmode=PW
[hotkeys]
number_of_hotkeys=19
hotkey1action=Stack table
hotkey1key=Z
hotkey2action=Move table to slot 2
hotkey2key=X
hotkey3action=Move table to slot 3
hotkey3key=C
hotkey4action=Move table to slot 4
hotkey4key=V
hotkey5action=Fold
hotkey5key=Q
hotkey6action=Call
hotkey6key=W
hotkey7action=Bet
hotkey7key=E
hotkey8action=Open Replayer
hotkey8key=P
hotkey9action=Move table to slot 5
hotkey9key=B
hotkey10action=Ignore table
hotkey10key=Y
hotkey11action=Tile all tables
hotkey11key=T
hotkey12action=BetSize 1
hotkey12key=1
hotkey13action=BetSize 2
hotkey13key=2
hotkey14action=BetSize 3
hotkey14key=3
hotkey15action=BetSize 4
hotkey15key=4
hotkey16action=BetSize 5
hotkey16key=5
hotkey17action=Activate most urgent and move mouse
hotkey17key=G
hotkey18action=Disable Hotkeys
hotkey18key=\
hotkey19action=Activate most urgent and move mouse
hotkey19key=Space
send_table_under_mouse=1

Seems like it jumps the mouse to the location of the FOLD button, I need another scrip that jumps the mouse to the location of the FOLD NOW button if possible.

Thank you.

does this work with Global Poker?

there is no built-in support for Global Poker, but some users have chosen "Other" from the Sites dropdown and added it as a Custom Site. See this page if you want to try it:
https://www.stackandtile.com/sat/hel...-site-tutorial

thanks for your layout config file, that helps.. it looks like WPN had put out an update. normally the Fold hotkey should click the Fold Now button.

download and install this version 2.99.06p:

http://www.stackandtile.com/sat/tmp/...tup-29906p.exe

Remove and re-Include the "WinningPoker" site and then test it and let me know if it works now

I play on WSOP in Nevada, and would like to purchase stackandtile. Wanted to make sure it was usable on the wsop Nevada site, also, if so, is it on the 888 poker software? thank you for your help
[email protected]

Yes, I have one or two players who are using it. Try including the "888PacificPokerQT" site into SAT and test to make sure it works. Let me know if you have any problems

Thanks Greg

Hey, I bought SAT, but do not get the activation mail, I also cannot post therefore on the forum, and in here I cannot send you private messages?

TheMagician1983 is my SAT username please add me there, as I do not receive any activation emails, also not in spam, etc.

Ok I activated your account on the SAT forum

HI Greg,

I am trying to use SAT for partypoker on my MAC. I run SAT with winebottler and it seems to be working fine however I cannot get SAT recognise the PP table. Is it because it the PP runs on MAC or maybe something else wrong with the PP/SAT settings?

Its because you're running Party on MacOS. The only way it will work is if you run everything inside the same Windows instance

Hi Greg,

sorry...got caught up with life a little and didnt have much time to get into setting everything up any further but now I have some time again. Here are my questions:
1. I want to play on Stars, 888, WPN and Chico. That should work right?
2. I want to make a grid with lets say 6 tables (but I play more). I want all tables stacked in slot 1. Lets say I play 3 tables each site...so thats 12 tables. Every time a hand needs action I want that hand to come up front and stay there until I clicked an action button. That is possible right? How do I have to set up all 4 sites?
3. I want to assign a hotkey, let say F1 everytime I want to keep track of a hand...so I make a hotkey for F1 = Move table to next slot. So table should move to slot 2. If I want to move another table from the stacked slot 1 and press F1 again this table moves to slot 3. Is that correct, any better way to do it/better hotkey?
4. When I want the hand to move back into the slot I assigned a F2 = Stack Table. Is that OK or is there a better way to do it?
5. Does sit out next bb or next hand work on all those 4 sites? So can I use it?
6. Is there a sit back in all tables hotkey/funtion for all 4 sites or in general?
7. What happnes if I time out on one table for whatever reason. Can I get SaT to show me this table so that I can sit back in?
8. Whats with new tables. I dont want them to get moved into the stacked slot 1 automatically once I just open a table in the lobby. What the best way to handle that. I wanna see the table and the seat and make sure I wanna play that table. So maybe making an 8 table grid and using slot #7 for new tables?
9. What are old tables again? Not sure I understand that.
10. Anything else in my setup that might not work or might be flawed?

Thanks for the help.

Yep

Just include all sites normally. If you dont want tables to move out of the stack automatically, just use "Move to grid = Never"

Yep that's correct. And then the table will move back to the stack when you click Fold with your mouse, or if you use a Stack or Fold+Stack hotkey

Yep exactly, or Fold+Stack as mentioned above

The sitout hotkeys should work on all of those sites except 888 because theres no actual sitout checkboxes on the new 888 theme.. i believe its a sub menu after you click another button

The same hotkey for sitout will just toggle clicking the same checkbox, so in effect it would work as a 'sit back in'


Yep exactly by default the New Tables Slot = 'grid' which means its the same as a hotkey for "Move to next slot", the new table will move to the next available grid slot. You could set the New Tables to a specific slot as well, and then just use your "Stack Table" hotkey to move it into your stack

Timing out on a table should be handled by the Old Tables feature. Old Tables are tables that SAT detects haven't had any action required in the last X minutes (5 minutes by default, configurable in Advanced Options).

It sounds like you have a good grasp of how everything works. Try it out, and if you have any quirks let me know

I've already skyped you but thought I'd post my questions here as well if you'd rather answer here and then it may help other users out as well.

Question one is regards to the above statement. Is selecting "move to grid = never" in stackandtile mode basically the same thing as playing stacked? If this is selected will the most urgent table just jump to the top of the stack rather than being moved to the grid? Are there any differences here compared to just playing in "stack" mode normally?

Question two is regards to the way WPN tables load. In my setup the stack slot and new tables slot are the same slot. WPN tables seem to load outside of those predefined coordinates, are resized, and then they are moved into that slot. If there is no way to have them directly loaded into that slot is there some way to have them load and resized in the coordinates of my choice? maybe offscreen if possible? Sometimes they seem to load directly over one of my grid slots.

Just went to the website and found my answer to my first question and it does play similar to stack mode. However, currently in stackandtile mode it's set to avoid moving tables to the top of the stack when mouse is hovered over the stack. Will this not cause an issue with a player playing this way? You'd be forced to move your mouse away from the stack just so new tables would be able to be moved to the top.