Dear StackAndTile,

i need like TOI's function, all table begin stack slot 1,if i fold the table,it is still stack,

but if i got any move like check call or raise,this table will move to slot 2,and when slot 2

table finish this hand,it will return to stack.how do i set up for this function?thanks a lot.

so I uninstalled my previous adobe flash versions and installed adobe flash 10 for security reasons, however since I've done this I haven't been able to get stackandtile to work. When I try to open it, it doesn't pop up anymore. I guess it just crashes?

use Tile Setting "VPIP", and set up bet/call hotkeys if you want. if you want to just use mouse clicks, enable "left click detection" in Advanced Options

flash shouldnt matter. are you certain SaT is crashing, or does it still show up in the taskbar at the bottom? if so, look at my posts within the last week to find the bugfix, the "-32000" settings in your config ini

[QUOTE=greg nice;22834111]use Tile Setting "VPIP", and set up bet/call hotkeys if you want. if you want to just use mouse clicks, enable "left click detection" in Advanced Options

Dear StackAndTile,

i use VPIP mode but all my tables are tile,and when hand finished,it didn't

stack to slot 1.can you help me? thanks a lot

what is your New Tables setting? that determines where hands go at the start. if they are all tiled, its because you have it set to put all New Tables into grid. if you want all tables to start in the stack, then set it to your stack slot #.

tables do not return to the stack at the end of the hand, i havent developed that feature yet. for now, they will only return to stack when you Fold

the gui=0 solution worked, thanks

Just some feedback and an issue.

Using Windows 7 x64 aero on betfred ipoker

I haven't used SaT in a while and decided to put in a session ipoker using it. I found the new custom site wizard looks good but didn't actually work. Once the table attaches to the wizard and you're supposed to click I can't actually see the cursor at all. So I have to escape out of it and take screenshots and found the coordinates myself.

Anyway I managed to set it up and get it to work manually. I am not using any action hotkeys at all, just the external vpip hotkeys and the stack hotkey.

Anyway, onto the issue, it happens quite often that when I hit a vpip hotkey the actual table I click on doesn't tile but another one does. Not sure if its directly behind or what but the table I actioned on will stay in the stack and I'll get another table tiled.

This doesn't happen all the time but say around 10-20% of the time? Any ideas on what this could be?

Oh another thing, the "never" setting still tiles the tables if the external vpip hotkeys are hit. obviously removing the hotkeys does the trick

Thinking about this, I'm guessing it happens because the next table to act pops up and SaT thinks its this table it has to move. I will lower the action delay and see if this helps. Make sense?

One more thing I noticed. When folding in the stack it sends the table to the bottom of the stack which is fine.

However, folding a tiled table doesn't do that. It puts the table into the stack on top of the other tables possibly covering a table requiring action. This means you have to wait for the next cycle for the table to come back to the top. This can be an issue if playing a lot of tables

Dear StackAndTile,

VPIP mode function is that if i check bet call,the table will move to slot 2 right?

my setup is VPIP mode and new table goes to slot 1,but when i run StackAndTile,the

table always stack in the slot 1,is that somting wrong? thanks a lot.

this bug was reported by another as well who was using ipoker. im gonna remove the 'attaching' of the table


are you sending hotkeys to tables under the mouse or active tables? that could have the effect. or maybe ipoker tables are stealing focus from each other? i dont think Action Delay should affect this


hrmmm.. overlooked that. i guess the external vpip hotkeys should not tile under "never" setting. "never" doesn't really mean "never", since Manual Move hotkey will work. but yea i guess vpip hotkeys shouldnt



stacking a tiled table should still send it to the bottom.. can you recheck?



yes, basically SaT will put all tables into the "stack". in the Settings, you choose which slot is your stack (usually slot 1).

so, if you only have two slots in your grid configuration, and slot1=stack, then slot2 will be used for your grid. and it sounds like you have New Tables into slot1 as well.

so when you press Start with VPIP mode, SaT will move all tables into slot1. here you will play all your hands preflop. if you fold, the table will stay in the stack. if you call or raise, the table will move into the next open slot in the grid (slot2, slot3, etc)

yes, basically SaT will put all tables into the "stack". in the Settings, you choose which slot is your stack (usually slot 1).

so, if you only have two slots in your grid configuration, and slot1=stack, then slot2 will be used for your grid. and it sounds like you have New Tables into slot1 as well.

so when you press Start with VPIP mode, SaT will move all tables into slot1. here you will play all your hands preflop. if you fold, the table will stay in the stack. if you call or raise, the table will move into the next open slot in the grid (slot2, slot3, etc)[/QUOTE]

thanks for your answer,i understand what you say.but the problem is i use

VPIP mode,but when i raise or call preflop,this table dident move into slot2,

the table still stack slot1.

is that any setup wrong? thanks.

Thanks for taking the time to reply greg.

I am sending hotkeys to table under mouse. I think you are right about ipoker tables stealing focus. When it is the wrong table being tiled it is always a table that requires action.

So what it happens I guess is, I click my raise hotkey and my external hotkey program clicks it for me. ipoker then focuses the next table that requires action instantly. SaT now registers the vpip hotkey and moves the table which has now changed into the grid. Wonder what can be done about this. Maybe pick up the id of the table as soon as its clicked on?

Played a 6 hr session yesterday but pretty sure it never sent the tables to the bottom with the stack hotkey. It just went to the top of the stack. I will check again in my next session but pretty sure this is what's happening.

You know what this doesn't happen anymore. The only thing I could have changed is the advanced option activate table on move. Can this explain it?

edit: it still happens. not every time but more often the more tables there are I think

what poker site are you playing on? how are you "raise" or "call"ing preflop? are you clicking the buttons or are you using hotkeys? if you are just clicking raise/call with your mouse, then you'll need to enable Left Click Detection on the About tab, under Advanced Options.

ah yes, this could be the problem. action delay might solve it, if you LOWER it. you can try. SaT already picks up the table id as soon as its clicked on. but perhaps your external hotkey program is quicker than SaT. you can also try changing the order of SaT and your external program and tell me if that helps

Hi, just wanted to say great program but I can't quite get it to work the way I want. I am sure its user error

1) I configured a 9 slot grid and defined stack slot and new tables slot to 5 so that when I open new tables they will stack in that slot. This does not work for me. The tables are randomly placed on my monitor?
2) How do I get the tables to pop out of the stack and go to one of the other 8 slots when I bet or raise preflop?

Thanks for any help!

Yeh... I'll using SaT's hotkey functions and see how it goes with that. Cheers

what site are you using? did it set up properly in the Sites tab?

use Tile Setting: VPIP , and set up corresponding Hotkeys, or if you want to use mouse, enable Left Click Detection in Advanced Options

I am using Pokerstars. Yes it is set up correctly in the Sites tab
What action do I use to for what I want? Stack table?
What do you mean if I want to use the mouse? for what?

Thanks for such a quick response

Ok all the tables stack correctly in the specified slot now. They still don't go to the other slots when I am facing an action though. Not sure which action I should be using to achieve that?

I have the similar issue as Younggunz, thanks for asking those questions.

I setup the tile setting for vpip, the site (PS - i got it working for classic HOWEVER TN says it detects my theme to be Hypersimple and not classic and in PS it says my tables are setup for hypertheme, only the lobby is setup for classic) and hotkeys for manually move table and stack table. However now when i open tables they automatically tile but they are way off center, on my monitor half the tables go off to the right and i cant even see. So there's some issue going on here which im unaware of.

And thank you Greg for the program and quick replies.

+1 for entraction network

do you want it to go to the grid when youre facing action? if so use Tile Setting: preflop

click Configure Grid and drag and rearrange the slots where you want them

No. I guess I am not making myself clear
I want all my tables to remain in the stack until I am involved in a hand that goes to the flop. And I want that action to be automatic.

Example - I raise on the BT and SB calls me. That table will now automatically exit the stack and be displayed on the grid.

Does this program do that?