Open Side Menu Go to the Top
Register
Table Tamer - Multi-Site Tiling and Hotkeys Table Tamer - Multi-Site Tiling and Hotkeys

01-15-2015 , 04:27 PM
Quote:
Originally Posted by Lukkyshotz
when i key bind fold... it folds everything even if i have fold is check when possible
That feature may not be available on your site. What site do you play on? I will look into it.
01-15-2015 , 04:53 PM
Sweet software. it does however crash, right after i hear some artificial sound...suggestions ?
01-15-2015 , 04:56 PM
Quote:
Originally Posted by pokecancer
That feature may not be available on your site. What site do you play on? I will look into it.
pokerstars
01-16-2015 , 06:58 AM
Is the log file needed for TT to function properly, do tournaments tables need to to be configured individual to capture components of table e.g. type of tournament Holdem, Plo, Plo8. I Know every Cpu will have its limitation due graphics card, video card, etc., so I would like to find out what type of setups are capable of. Any users max. total table count on 1 site 2 site, etc. I ask because yesterday I was playing on Pokerstars, Carbon, and Full flush. Things seemed fine with my configurations. Acer labtop inte corei5 6gb ddr3 1792 mb video memory, extended monitor. Certain tables would freeze over and over again while running TT and after stopping. Icongigured Log file to App data log.0 then later log.1. I am not to cpu techincally familar, but love the program and would like to know how to troubleshoot my config to get TT to function properly. I configured layout 4 slots, and multiple slots, not exactly sure if I stack if each slot can hold all the tables or is that configured by stack ________enter num field will determine how many can go to each slot at a given time. Followed what I think are the basics described in on main site and read over many posts. Are there any users that could help. Thank you
01-16-2015 , 07:13 AM
Quote:
Originally Posted by pokecancer
Can you screenshot the error for me? Are you 100% you selected the correct folder and that your installation of BCP is valid?


Hey, I made before a mistake, but now I get still a message - this one:

http://imgur.com/DqoS3W9

But due to your setup-guide under point 6.), the client should get closed automatically once I then run it as admin, but this is not happening - it stays open....

btw, this one:
7) Shut off auto switch between tables.

I guess there is not such an option at black chip poker, so I dont need this point, right?

Or is there such an otion and I just cant find it?
01-16-2015 , 09:53 AM
Do table tamer support Xbox controllers as input for hotkeys?

Sent from my C6603 using 2+2 Forums
01-16-2015 , 05:04 PM
On the front page of the website it clearly says you can use your xbox controller

Hey poke forgot to come back and add something about Merge stealing focus. I'm on the 2nd to last version before you disabled fold is check when possible on WPN. After disabling it I went ahead and re enabled this setting for WPN as nothing else had changed in my setup of TT and I wasn't running any new programs that could potentially be interfering with poker/tt stuff. On my next few sessions had 0 issues with merge stealing focus.
01-17-2015 , 08:14 AM
First of let me start by saying thanks to you for providing this tool for free. It is a true lifesaver for grinding long hours of cash on Bovada. The add chips hotkey is a godsend. I don't even know how I played without this before.

Just a few small bugs for me:

1. I 4 table on Bovada, I tile my tables and have my hotkeys setup to go to the table under the mouse. The main hotkey I use the most is 2.8bb for opening pots. Here is the issue, sometimes when I am pressing my hotkey over the table I want to open 2.8bb on, it ends up only min-raising. This seems to occur when another table happens to beep because actions is on me fractions of a second before I press the 2.8bb key. This happens like once every 3-400 hands or so.

2. I have the option "handle add chips dialog" toggled and a hotkey set up to rebuy. Sometimes I accidently press the add chips button the table itself, prompting the dialog box to pop up. It then (about half the time) glitches out and gets stuck there. I can't act on any of my tables and I time out unless I turn off TT, then it allows me exit out of the dialog box.

3. I have tried setting up a custom layout, it's pretty easy to do and seems like a cool feature. However, when I set up my layout and turn TT on to try it out, the tables come out skewed. The title bar at the top of the table gets really small as does all the text on the tables. I have tried checking the "table height scaling" and the "hide title bar" boxes and trying different things, but the tables always came out looking funny for me.

Any help is much appreciated, thanks.
01-17-2015 , 11:44 AM
Does PokeStars updates cause TT to not recognize tables, does the log file config have to be currently updated. I get Stars tables to run for awhile or a table will freeze up shortly. Any suggestions from other users on Stars. Other tables run fine at the same time.
01-17-2015 , 02:51 PM
Quote:
Originally Posted by TerraNNone
Sweet software. it does however crash, right after i hear some artificial sound...suggestions ?
That is strange. Please click on the ? button, and then send logs.
01-17-2015 , 02:59 PM
Quote:
Originally Posted by Lukkyshotz
pokerstars
PS has this feature built in to the poker client. I'm sorry, but I can't find it in PS settings right now.
01-17-2015 , 03:02 PM
Setting this up is not easy at all. I cant figure it out.
01-17-2015 , 03:05 PM
Quote:
Originally Posted by Zrebna
Hey, I made before a mistake, but now I get still a message - this one:

http://imgur.com/DqoS3W9
That message is good. It means to restart your poker client because TT made changes to it. Once restarted, TT should function correctly.

But due to your setup-guide under point 6.), the client should get closed automatically once I then run it as admin, but this is not happening - it stays open....
The update window is what should close, not the poker client.
btw, this one:
7) Shut off auto switch between tables.


I guess there is not such an option at black chip poker, so I dont need this point, right?

Or is there such an otion and I just cant find it?
It is in options/general in the poker client.
.
01-17-2015 , 03:06 PM
Quote:
Originally Posted by TomoDaK
On the front page of the website it clearly says you can use your xbox controller

Hey poke forgot to come back and add something about Merge stealing focus. I'm on the 2nd to last version before you disabled fold is check when possible on WPN. After disabling it I went ahead and re enabled this setting for WPN as nothing else had changed in my setup of TT and I wasn't running any new programs that could potentially be interfering with poker/tt stuff. On my next few sessions had 0 issues with merge stealing focus.
Thanks for the update.
01-17-2015 , 03:15 PM
Quote:
Originally Posted by TVC21
First of let me start by saying thanks to you for providing this tool for free. It is a true lifesaver for grinding long hours of cash on Bovada. The add chips hotkey is a godsend. I don't even know how I played without this before.

Just a few small bugs for me:

1. I 4 table on Bovada, I tile my tables and have my hotkeys setup to go to the table under the mouse. The main hotkey I use the most is 2.8bb for opening pots. Here is the issue, sometimes when I am pressing my hotkey over the table I want to open 2.8bb on, it ends up only min-raising. This seems to occur when another table happens to beep because actions is on me fractions of a second before I press the 2.8bb key. This happens like once every 3-400 hands or so.
Do you have 'Disable pop to front' enabled in your Bovada client?

2. I have the option "handle add chips dialog" toggled and a hotkey set up to rebuy. Sometimes I accidently press the add chips button the table itself, prompting the dialog box to pop up. It then (about half the time) glitches out and gets stuck there. I can't act on any of my tables and I time out unless I turn off TT, then it allows me exit out of the dialog box.
I will try to replicate it. When you say you accidentally press it, do you mean with your mouse or the hotkey?

3. I have tried setting up a custom layout, it's pretty easy to do and seems like a cool feature. However, when I set up my layout and turn TT on to try it out, the tables come out skewed. The title bar at the top of the table gets really small as does all the text on the tables. I have tried checking the "table height scaling" and the "hide title bar" boxes and trying different things, but the tables always came out looking funny for me.
Using a layout with Bovada tables can produce a look that some players may not like. It blurs the text slightly. I am assuming this is what you are seeing. There is nothing I can do about it. It is a bug in Bovada that happens when a third party program resizes the table.

Any help is much appreciated, thanks.
.
01-17-2015 , 03:15 PM
Quote:
Originally Posted by wsopbound4sure
Setting this up is not easy at all. I cant figure it out.
Have you read the tutorials on the website?
01-17-2015 , 03:19 PM
Quote:
Originally Posted by DigitalFeltBully
Does PokeStars updates cause TT to not recognize tables, does the log file config have to be currently updated. I get Stars tables to run for awhile or a table will freeze up shortly. Any suggestions from other users on Stars. Other tables run fine at the same time.
I don't know what you meant about the log file being updated, but it should point to log.0 and not log.1 like your previous post suggested you changed it to. Click the ? and then go to send logs, so that I can evaluate your settings and try to figure out what is causing the problem. Does it happen even if you only have one ps table open? Are you running any other poker software? What is the freeze like? Does it freeze permanently?
01-17-2015 , 05:02 PM
Quote:
Do you have 'Disable pop to front' enabled in your Bovada client?
No I didn't, I guess I should turn it on and see if that stops it

Quote:
When you say you accidentally press it, do you mean with your mouse or the hotkey?
with my mouse

Quote:
Using a layout with Bovada tables can produce a look that some players may not like. It blurs the text slightly. I am assuming this is what you are seeing. There is nothing I can do about it. It is a bug in Bovada that happens when a third party program resizes the table.
If I click the edge of the table like I'm going to resize it the text pops back to the way it should be it seems. I don't shrink my tables so it works fine
01-17-2015 , 11:00 PM
I uninstalled table tamer because I no longer want it, but my bet buttons are still blue and red. How do I get rid of everything on my bovada client table tamer related? I assumed uninstalling TT would have fixed it. Do I have to reinstall bovada?

edit: uninstalled bovada and its back to normal.

Last edited by bm303; 01-17-2015 at 11:21 PM.
01-19-2015 , 12:24 PM
Quote:
Originally Posted by pokecancer
.
Hey, thx for responding and sry for my noobish questions - Im rly a big technical donkey^^

Anyways,
now I think I have setted it up correctly and it seems that tabletamer is on cause the ables our now highlighted with a colourful frame (btw., can I disable somewhere this frame-option?).
But the hotkeys seem not to work - for instance I have setted for "Fold" the right museclick, but tabletamer does not react when I click my rightclick my mouse...
Dunno atm where I could have made a mistake...

it looks atm like that:

http://imgur.com/obp5lUk

Also it seems to be off atm, cause I also have setted a betsizehokey with "F2" for a 2/3 PSB, but whenever I cklick at "F2", then I check my hand...

Im also wondering how I can make a setting unhappen (make it wo "none") again?
01-19-2015 , 04:33 PM
How come table tamer is free but not open source?
01-19-2015 , 05:29 PM
@Zrebna

Are you running the program as admin? If not you need to do this. Right click the desktop icon, click properties, and under Compatibility click run as an administrator. This need to be for both WPN and Tamer. I think this would be the likely cause off the fold button not working, not sure on your F2 issue. ALWAYS start TT before you run WPN!

To turn border off click Settings then go to Overlay and disable borders! Try putting in some effort

@Italian
The man is going to be selling this soon he's not about to give you the source code

Last edited by TomoDaK; 01-19-2015 at 05:37 PM.
01-20-2015 , 12:25 PM
Quote:
Originally Posted by pokecancer
.


1. I'm playing on Stars. It's definitely caused by table tamer because when I close table tamer the problem stops and the lobbies stop opening.

2. If I turn off pop table to the front then I have to press my cycle hotkey after every single table decision. I need tables to pop to the front but I just don't want them to steal focus from my skype chat box, web browser etc.

Thanks for the help, any ideas?
01-20-2015 , 03:51 PM
Quote:
Originally Posted by Mentality135
1. I'm playing on Stars. It's definitely caused by table tamer because when I close table tamer the problem stops and the lobbies stop opening.
I just downloaded and installed table tamer today.
Works like a charm, The only problem I have on PS is the same as Mentality describes.
When I run TT, SNG-lobby opens when I register, when I stop TT, it doesnt.
Very distracting if you have to close every lobby when multitabling.

In PS-7 client under Settings - Gameplay - multi-Tabling "Auto-open tournament lobby" is unchecked.

Any thoughts?
01-20-2015 , 03:58 PM
Quote:
Originally Posted by Zrebna
Hey, thx for responding and sry for my noobish questions - Im rly a big technical donkey^^

Anyways,
now I think I have setted it up correctly and it seems that tabletamer is on cause the ables our now highlighted with a colourful frame (btw., can I disable somewhere this frame-option?).
But the hotkeys seem not to work - for instance I have setted for "Fold" the right museclick, but tabletamer does not react when I click my rightclick my mouse...
Dunno atm where I could have made a mistake...

it looks atm like that:

http://imgur.com/obp5lUk

Also it seems to be off atm, cause I also have setted a betsizehokey with "F2" for a 2/3 PSB, but whenever I cklick at "F2", then I check my hand...

Im also wondering how I can make a setting unhappen (make it wo "none") again?
It sounds like you didn't select the hotkeys. There is a drop down list in the main window.

To clear the hotkeys, click the ... button and then click clear.

      
m