[UTILITY] TableNinja - Hotkeys and Utilities for PokerStars
03-05-2014
, 06:45 PM
Quote:
Hi OMGBarackObama,
First off, sorry for the late reply. Second, thanks for kind words!
0. What version are you using?
1. About half red/half green - once a table gets the red frame (it's Target), the icon will change to green - meaning all hotkeys work. At a later time, we want to allow you to customize which hotkeys are global and which not.
2. About HUD - are you talking about PS, or another site? Normally, they should show up.
3a. About cycle fw/bw - this is weird - according to my knowledge, it should have been fixed in 2.2.168.
3b. About cycle to prev in line - that will not take you to the table you previously acted on - the "next in line/prev in line" will only cycle you through the tables that are currently active. However, cycle bw should take you to the last table you acted on. Please let us know if that is not the case.
4. Sorry about iPoker - we're still in early beta. We plan to do more development on that starting around end of this month.
5a. For 888, we only recognize the tables - that's all - so we don't really know at this time if there is action on any 888 table yet.
5b. Adding 888 should not be very difficult to do - my initial take is that it's easier than iPoker - so we should have it rather soon
5c. xpadder should not be needed.
Suggestions:
1. I guess we can do this.
2. I see what you mean - it's not an easy thing to do, but it's definitely doable. We'll add it to our TODO list (although because of a new feature we should add soon - you might not need this :P)
3. Yes, adding multi-stack is on our TODO list - basically, you should be able to have several stacks, and for each stack have a "filter" - which tables go into that stack (based on stack size, stack BB, tournament level, site, and so on)
4. Yes on winamax - we plan to add this too - it's not an easy thing to add - I've already done an analysis of it, and it's rather complex. But in a bit of time - 4-6 months I guess, if no major issues, we should definitely include it.
5a. Added to TODO list.
5b. Please note that positional betting is "experimental" - there are still a few issues with correctly guessing the hero's position. We're still analyzing how we can compute this as close as 100% correctly - but it's not an easy task.
I will have Denise set up a teamviewer session to see what we can do to help right now. Long term, if you have any issues, please let us know and we'll do our best to help.
Best,
John
First off, sorry for the late reply. Second, thanks for kind words!
0. What version are you using?
1. About half red/half green - once a table gets the red frame (it's Target), the icon will change to green - meaning all hotkeys work. At a later time, we want to allow you to customize which hotkeys are global and which not.
2. About HUD - are you talking about PS, or another site? Normally, they should show up.
3a. About cycle fw/bw - this is weird - according to my knowledge, it should have been fixed in 2.2.168.
3b. About cycle to prev in line - that will not take you to the table you previously acted on - the "next in line/prev in line" will only cycle you through the tables that are currently active. However, cycle bw should take you to the last table you acted on. Please let us know if that is not the case.
4. Sorry about iPoker - we're still in early beta. We plan to do more development on that starting around end of this month.
5a. For 888, we only recognize the tables - that's all - so we don't really know at this time if there is action on any 888 table yet.
5b. Adding 888 should not be very difficult to do - my initial take is that it's easier than iPoker - so we should have it rather soon
5c. xpadder should not be needed.
Suggestions:
1. I guess we can do this.
2. I see what you mean - it's not an easy thing to do, but it's definitely doable. We'll add it to our TODO list (although because of a new feature we should add soon - you might not need this :P)
3. Yes, adding multi-stack is on our TODO list - basically, you should be able to have several stacks, and for each stack have a "filter" - which tables go into that stack (based on stack size, stack BB, tournament level, site, and so on)
4. Yes on winamax - we plan to add this too - it's not an easy thing to add - I've already done an analysis of it, and it's rather complex. But in a bit of time - 4-6 months I guess, if no major issues, we should definitely include it.
5a. Added to TODO list.
5b. Please note that positional betting is "experimental" - there are still a few issues with correctly guessing the hero's position. We're still analyzing how we can compute this as close as 100% correctly - but it's not an easy task.
I will have Denise set up a teamviewer session to see what we can do to help right now. Long term, if you have any issues, please let us know and we'll do our best to help.
Best,
John
0. Just got auto-upgraded to 2.2.203.0, not sure before that but I imagine I've always used the newest version b/c I have it set to update to all betas ect
1. I have my tray auto-minimized so that's probably why I only ever see it half/half. It's never in my field of vision when a table is up.
2. I guess I meant for all sites. Seems to work on PS/PS.fr most of the time, doesn't work for Tilt I don't think and likely isn't implemented for iPoker?
3. Cycle Backward works and is a godsend. It's all my left trigger has ever wanted to be.
4. NP, I think iPoker is especially confusing b/c they have a time back that times down when you are waiting to act that isn't your actual timebank, so it always feel's like you've gotten to the table late. I am not however confident that activating the actual timebank on ipoker is working 100% of the time.
5a-b. What does recognize the table mean? Just curious. Is that the first step as a developer for adding future functionality?
5c. I understand that xpadder isn't needed but I still use it. It can be helpful, especially with some of the workarounds I have for other sites
-----
1. Plz plz do. It would help my OCD a bunch when making layouts to make things exactly the same size. Maybe a snap to grid feature too? I think windows has one, haven't tried it with tableninja2 yet.
2. Looking fwd to either this or a new feature. One this that would REALLY help is a single hotkey to "Set aside to next available space." Presently I turned off snap-back and allowed only one table for each set aside slot, and then set a macro on one of my mouse buttons to hit every set aside hotkey 1-10 and this does move a table to the next available space. I imagine I'm not the only one who wants this feature though.
It would then be nice to be able to mouse over any table we've set aside and press this same button to return them to stack. Or at least to have one universal "return to stack" hotkey. Ultimately I'd like to be able to pull tables in and out of my stack with 1 or at most 2 buttons, having to use 10 is cumbersome.
3. I hope multi-stack is a priority bc this would be very solid. Hopefully filters for both by software and by game type. For instance I would like to be able to stack all my hyper SNGs in one place, and if it's by BB or ante I don't want hyper SNGs stacks with short-stacked MTTs.
4. Look fwd to it. Winamax software as a whole is pretty good compared to 888/ipoker/microgaming ect but their seating preferances and table sizes are annoying.
5a. Hope to see mark hard soon, even if just for PS/PS.fr
5b. Can imagine positional betting is difficult, especially for many site. Again, just PS/PS.fr support to start would be cool. I haven't messed with it much since my first post.
-------
Currently I'm using a Table Ninja 2 "Stack" Design with my set aside tables placed around my stack neatly as if they were basically tiled. I think this layout is best b/c it allows me to stack early flight MTTs/SNGs and pull out important tables (or awkward software such as ipoker that takes my brain extra time to recognize after clicking through 10 PS/PS.fr tables.)
I don't like NinjaTile (or stackntile.ahk) b/c tables moving around on their own doesn't suit me. Perhaps I could get used to it but it's not what I prefer at the moment.
My layout looks like this:
*Table 10 is on my laptop screen, and I usually only use either slot 7 or 8+9.
The only MAJOR PROBLEM I am having at the moment is tables in my main stack not popping up when it is their turn to act. I played a full Sunday stacking PS, PS.fr, FTP and iPoker and I actually didn't notice any problems with this. However, it might have been happening and I just didn't notice. Worth noting, on Sunday I didn't have my table aside hotkeys how I wanted them so I was just pulling tables out manually (click and drag) and I also had winamax and 888 tables so most of my stack was PS/PS.fr/FTP with the occasional iPoker table. I tried to pull out the ipoker and just stack PS/PS.fr/FTP most of the time and I think it was working but I guess I wouldn't have noticed if tables were occasionally timing out b/c I had so much going on.
Yesterday, with my Stack above and the above set aside tables I tried to play just a light session of PS and PS.fr, 8-12 tables of mostly hyper SNGs and a few MTTs and I had ALOT of problems with tables not popping up. I ran my tablepreview.ahk on my laptop display which shows a preview all the tables I have stacked and what's happening on them in real time. I was CONSTANTLY seeing tables that needed action and watching me timing out on them while my stack wasn't moving and it looked like I had no tables needing action. This really surprised me b/c I had thought that stacking at least PS and PS.fr was working flawlessly.
I'd be happy to send log files if that would be helpful. Alternately we could set up a teamviewer appointment as you suggested.
What would be ideal is a stack of tables that always brings to the top of the stack whatever table in the stack requires action. Then any I have set aside would now longer be considered in the stack, and it would be my responsibility to mouse over them (i use table under mouse activation) and click on them, and then bring my mouse back to my stack to resume clicking through my stack. Is this currently possible? If so can you give a list of setting for me to cross reference to make sure I have it set up properly?
I am thinking perhaps my issues with tables not popping up stem from tables that are set aside needing action and then when I move the mouse to act on them it isn't resuming bringing stacked tables to from. I'm just speculating though. I tried leaving all my tables in the stack and leaving my mouse on the stack and still I would see tables needing action on my preview screen and my stack would still have a table non requiring action on top. I believe usually it would be a stars.eu table on top while a stars.fr table timed out or viseaversa. Within each software it seems to click through to the next table, at least most of the time.
There are other slight issues here and there but tables not popping up when they need action is the absolute #1 priority b/c if I can't get it fixed I can't use the software.
03-05-2014
, 07:26 PM
Quote:
I'd be happy to send log files if that would be helpful. Alternately we could set up a teamviewer appointment as you suggested.
What would be ideal is a stack of tables that always brings to the top of the stack whatever table in the stack requires action. Then any I have set aside would now longer be considered in the stack, and it would be my responsibility to mouse over them (i use table under mouse activation) and click on them, and then bring my mouse back to my stack to resume clicking through my stack. Is this currently possible? If so can you give a list of setting for me to cross reference to make sure I have it set up properly?
I am thinking perhaps my issues with tables not popping up stem from tables that are set aside needing action and then when I move the mouse to act on them it isn't resuming bringing stacked tables to from. I'm just speculating though. I tried leaving all my tables in the stack and leaving my mouse on the stack and still I would see tables needing action on my preview screen and my stack would still have a table non requiring action on top. I believe usually it would be a stars.eu table on top while a stars.fr table timed out or viseaversa. Within each software it seems to click through to the next table, at least most of the time.
There are other slight issues here and there but tables not popping up when they need action is the absolute #1 priority b/c if I can't get it fixed I can't use the software.
What would be ideal is a stack of tables that always brings to the top of the stack whatever table in the stack requires action. Then any I have set aside would now longer be considered in the stack, and it would be my responsibility to mouse over them (i use table under mouse activation) and click on them, and then bring my mouse back to my stack to resume clicking through my stack. Is this currently possible? If so can you give a list of setting for me to cross reference to make sure I have it set up properly?
I am thinking perhaps my issues with tables not popping up stem from tables that are set aside needing action and then when I move the mouse to act on them it isn't resuming bringing stacked tables to from. I'm just speculating though. I tried leaving all my tables in the stack and leaving my mouse on the stack and still I would see tables needing action on my preview screen and my stack would still have a table non requiring action on top. I believe usually it would be a stars.eu table on top while a stars.fr table timed out or viseaversa. Within each software it seems to click through to the next table, at least most of the time.
There are other slight issues here and there but tables not popping up when they need action is the absolute #1 priority b/c if I can't get it fixed I can't use the software.
I didn't Quote all your post as it is very long
However i would be more than happy to do a tv session with you to go through the issues you are having etc, Please contact me via Private message and we can arrange a meeting for some time over the next few days.
03-06-2014
, 02:31 PM
Quote:
03-06-2014
, 02:44 PM
