hi, the option send to active is active,but i do not have any keybinding associated.

the only keybinding's i'm using on table ninja are a keybinding to pop the table that needs action for longer time. I also use table under mouse as table control mode in table ninja, and a keybinding to shove.

Other than that i'm just using my mouse

DeNutza, you can try using Highlighter from my script for a while until Thoi makes his own version , just don't enable all other functions if you don't need them (you can delete everything from ini file except of highlight lines) http://forumserver.twoplustwo.com/45...l#post15991826

I use external hotkeys and cant get the "Keep in the grid" function to work (I'm trying to use middle button on that).

When you send a Keep In Grid command to a table, that table will stay in the grid (you can then do with that table whatever you want, move it etc., TOI will ignore that table) until you send the same command again to that same table (so it toggles). It does nothing when you send it to a table in the stack. Isn't that good enough?

What's te point of bringing it to the unseated stack when it auto clicks the Im back button?

Please check if you're "Send To Active" setting is set right in TOI. Report back.

There is an option to auto move sitting out tables to the unseated stack. It takes 2.6 minutes after sitting out before they are detected (and moved).
Please try v1.70 in a couple of hours (almost done), I might have fixed this problem that a few users were having (in the new version it will store the tables unique name before sending the action command instead of after). With huge delays/lags there might be a theoretical chance that it misses the right table name in the current situation...

Please note that the Keep In Grid function only works on grid tables and when you press it a second time, it will undo it again (it's a toggle function)... Perhaps you might have pressed it a few times, turning it on,off,on,off,on,off or something.

Just played some STT in VPIP mode.

'I'm back' function didn't fire once.

My hand history's are not saved to default location.

It reads your hand history files for "%username% is sitting out" in the hand history of the last hand. If this line is in there, it auto-clicks the im back button (next hand). Please make sure that you havent set "Disable Detection" @ Sitting Out Tables in TOI, or it won't work.

If the tables move back to the stack when won a hand or lost at showdown, then your hand history directory is set right and all work as well. I would like to know if these things are all set correctly, if so, I would also like to know your table theme.

New version! Just released! New trial version available as well...

http://www.tableofinterest.com

v1.70
13 Januari
- Complete new graphical interface (redesign);
- New "F=Check Or Fold" option to keep tables in the grid when free-check warning has appeared (so the fold hotkey will work as a check/fold hotkey), please note: It will not bring tables to grid when you get a free check warning dialog in the big blind;
- Fixed problem where certain table-movement commands would go to the wrong tables at laggy systems (got 1 bug report of this). I made sure that it's impossible now for movement-commands to go to the wrong table;
- Fine tuning is also made possible now while the engine is running (except for slot swapping & deleting);
- "Set Slot" is done automaticly now in Fine Tuning, no more need to click "Set Slot" all the time.

----------------------------------------------------------------------
Just in case: A lot of core engine changes have been made in this update, which makes this update riskier than normal updates. All have been thoroughly tested though. Please remember you can always downgrade to v1.60 again if a new problem has surfaced that you don't like (don't forget to notify me first so I can fix it): (tableofinterest.com/Downloads/v1.60/TOI-yourusername.exe)

Yes thats great! Ill play around with it some more.

Also wanted to let you know that the AHK script StarsCash does
seem to be compatible with TOI as far as Highlighting Active table,
which is also great news.

Ill be testing these both tonight, and let you know if I have any problems.

The mouse hotkey for "Keep In Grid" doesnt seem to work for me.

Also PixelMode seems very buggy/inconsistent at moving tables in/out of stack.

Not sure where you are at or when I last reported, but V1.6 still has tables going to the unseated stack randomly.

Did you do any fixes for 1.7 or is this still an unknown/unsolved problem?

I had it on Sit Back In I thought I remembered reading a post mentioning for MTT/STT it was on regardless of setting.

I will run a few sets 2moro with Disable Detection and post back

Keep up the good work

Ermmm... With Disable Detection it will be disabled... So you had it set correctly. Im not sure why it won't sit you back in, it should do that the very next hand after sitting out. What table theme are you using, perhaps the Im back button is at a different location.

I thought I had it fixed, you're the only person reporting this behaviour though. I advice you to turn off the sitting out detection for the time being. I'll look into the code again when I wake up tomorrow, it should be solid I think but something has to be still not right I guess. I'll report back.

Still sometime table don't go to grid, but next goes. "Send to active" is off, it's not helped maybe have to increase or decrease "hotkey delay"?

I updated the site's help guide with information on how the Keep In Grid hotkey actually works, there seems to be some misunderstanding:

The Keep In Grid hotkey works like this: When you send a Keep In Grid command to a table, that table will stay in the grid (you can then also do with that table whatever you want, move it etc., TOI will ignore that table) until you send the same command again to that same table (so it toggles). It does nothing when you send a Keep In Grid command to a table in the stack.

Now you know how it works, please try again and report.

About PixelDetect Mode being inconsistent:
Please try recapturing your table background, do this by clicking either the Set Stack or the Set Grid button.

Taken from the site's FAQ section:
Why is my Grid instantly filled up with tables that shouldn't be there when I start the TOI Engine?
This is a PixelDetect Mode problem, you've either changed your table background since TOI table setup or you've manually resized your tables. You have to press "Set Stack (Slot 0)" or "Set Grid" in Setup to recapture your table background.

PixelDetect Mode was the default mode for a long time, so most users had it enabled with success, so something is wrong... I will test it now just in case, haven't tried it for a long time, there is a small chance something in a new update messed up this mode.

Was Slick it's modded but I tried it on the standard Slick Theme to and got the same result I will give it another spin with 1.7 when I am less krunk

I get this problem too. Have to uncheck/recheck the run button to get it back to normal

^^^ this. how to fix?

P/s oh wow it's strange. Look, when i use hotkey from "mouse hotkey" list (even Enter, like i put Enter to "check-call" in toi and Enter to "call" in TN) it's fine. But when i try to use same function from "Keyboard hotkey" - don't work properly most of the time

Supernice stuff but 2 things

1) Make it compatible with more sites!!! Ipoker primarily
2) Make the trial for like 3 days or whatever. I guess its fine trying ybernanostakes to try it but no one that plays higher really does it.

how do i stop TOI messing with my mouse up mouse down betting amounts, TOI seems to stop this functioning for me

thanks

me 2, after last 1.6 things got a little better but the problem is happening sometimes.

OK I found the problem! HQuality thanks a lot for this info (especially the second message). I looked for the difference between the Enter in the mouse hotkey list and a normal keyboard hotkey. The difference is this: The keyboard buttons in the mouse hotkey list are detected as soon as the key is pressed down. The keyboard hotkeys are detected as soon as the key is gone down, and then went up again. So I think I need to change them to detecting them @ down as well. Im not sure if this will affect the performance of users who are having no problems with the keyboard hotkeys, but Ill change it anyway in the next update (users will always have the option to downgrade to previous version).
Please email me a screenshot of a table in this theme with the "I'm back" button visible.
1) Full Tilt support is coming, apart from that I have no plans to add other sites (got no time as I have plans to begin development of other poker software).
2) I wish I knew how to do that, that would be better yes. I can let it look at the Windows time/date, but then people will just change their date all the time.
TOI is not compatible with AHK scripts that use the mousewheel up/mousewheel down... You either have to use mousewheel hotkeys in Table Ninja or other 3rd party tools that are not programmed in AHK, or you have to disable the AHK and enable the mousewheel hotkeys in TOI.

TOI also disables PokerStars built-in mousewheel changing betting size function, so if thats your problem: Simply enable TOI's, it works better anyways.
I'm currently looking into what's causing this, at the meantime, this can be solved by enabling "Disable Detection" (Sitting Out Tables). Just in case: Please report if this is also happening with detection disabled, but that is highly unlikely.

hey Thois, for a decent system, what would you recommend for the engine and hotkey delay? Also, with regards to hotkeys, I get the same problem someone else mentioned where pressing the hotkey will make the next table move to the grid rather than the targeted one. I feel like it has something to do with hotkey delay and what it's set to but im not 100% sure

No Im pretty sure thats not the problem, please wait for the next update (1 hour)... I think it has finally fixed all problems a few users were having with (mouse/keyboard) hotkeys moving the wrong tables.