if it works on FullTilt, then thats a good sign. can you tell me what exactly doesn't work on your Web Based room? i havent tested on web based rooms, but in theory it should work

Yup, started with a fresh config.

The Hotkeys is the only thing that work fine...

What does not work is the stack and tile...

"The most common use is to have a stack of tables, and when a table requires action, it gets tiled into a grid of slots across your screen, and returns to your stack when you're finished"...this feature does not work...

First: if i want to play in 3 tables, i have to setup 4 slot, cause the 1° slot does not work...
Second: if i play in 3 tables, and i click the start button on SaT, tables are placed in the 2nd, 3th, 4th slots that I have configured, but no table that requires action is popupped...



as you can see in the image, in the 1st table i have folded preflop, and the 2nd and 3th table requires action (as you can see there is the time bank actived), but nothing happens...

so basically your problem is that all tables continually steal focus from each other, is that correct? what Tile Setting are you using? can you try preflop tile setting, and tell me if tables instantly go to grid before its your turn?

ok, what do you mean that slot1 doesnt work, and that you have to set up 4 slots? in the config you posted in your last post, it showed that you have 3 slots.

second, you need to move all the tables to your stack first. and from your config, the stack is slot1. so we need to figure that out first.

in your config, it said that "space" is your "Stack table" key. move your mouse over the tables and press "space" and the tables should move to slot1 (your stack). then each time a table requires action, it will move into one of your slots

Thanks so much....

last thing, SaT tiled table that requires action when Hero receving cards, not when it is his turn to act...
so if in the table A Hero is in BB, and in the table B Hero is in UTG, and the table A is the first to give the cards, the table A is tiled and before table B is tiled, I have to wait my turn to act in BB on table A, and after Hero check the table B is tiled...but to late, because in the table B Hero is in UTG (first to act)...
this is not so bad if I play on two tables, but it becomes unmanageable if i play on 4 tables, because I often arrive late to act..

does the Fold button show up as soon as you are dealt cards?

what SaT does is during Include Site setup, it detects the fold button color when you press F10, and so whenever it finds this color, it thinks "action required" and then moves it to grid.

so maybe your web based poker site is displaying a fold button as soon as you are dealt cards

i see.. i assume "passa" means fold? the color of the "passa" button and the pre-action "pass ogni puntata" button are very close. so probably what happens is that SaT is detecting that the fold button is visible when cards are dealt, because SaT is thinking that the pre-action checkbox is actually the fold button, simply becuase the colors are very close to the same

so not too much you can do about this, since they unfortunately use gray color for their fold button as well as the pre-action checkboxes.

i suppose if you wanted, you could change the fold_button_x/y_coordinates in your dollaro custom site ini and change the numbers to match the blue Call button, then remove and re-include your site. and then, SaT would be searching for the Call button to determine if action is required. however, this will cause any 'fold' or 'fold+stack' hotkeys to not work

[settings]
table_width=794
table_height=597
total_slots=6
slot1x=-793
slot1y=31
slot2x=-2
slot2y=0
slot3x=1588
slot3y=0
slot4x=2382
slot4y=0
slot5x=792
slot5y=-1
slot6x=-1
slot6y=597
stack_slot=1
newtables_slot=grid
move_on_street=preflop
scan_mode=PW
[general]
gui_x=1025
gui_y=669
last_tab=Settings
[sites]
number_of_sites=0
included_sites=
[hotkeys]
number_of_hotkeys=0
send_table_under_mouse=1

Ive also added Betfred ( ipoker ) to the sites and saved that, here is the config.

[settings]

standard_table_width=792
standard_table_height=596

buttons=fold,call,bet

fold_button_x_coord=270
fold_button_y_coord=526
fold_button_region_topleft_x_coord=270
fold_button_region_topleft_y_coord=525
fold_button_region_bottomright_x_coord=270
fold_button_region_bottomright_y_coord=525

call_button_x_coord=401
call_button_y_coord=527
call_button_region_topleft_x_coord=400
call_button_region_topleft_y_coord=526
call_button_region_bottomright_x_coord=400
call_button_region_bottomright_y_coord=526

bet_button_x_coord=527
bet_button_y_coord=542
bet_button_region_topleft_x_coord=527
bet_button_region_topleft_y_coord=543
bet_button_region_bottomright_x_coord=527
bet_button_region_bottomright_y_coord=543

use_basic_click=1

table_class=PTIODEVICE

table_include_title_text=ME
table_exclude_title_text=Tournaments

ok look at these numbers. i dont know which slots show for you or not. for example, if slot 3 is not showing, then change the numbers for slot3x and slot3y and set them both = 0, which should put them in the upper left corner of the screen, and then you can go back to Configure Grid and move them.

now as for your Betfred pokersite config, make sure that it is in the /Sites subdirectory. and when you go to Include Site within StackAndTile, you should see Betfred (or whatever the filename of your betfred.ini is) at the bottom of the dropdown menu

Thanks greg ..

This is where im at now ..Seems like PROGRESS to me

[settings]
table_width=794
table_height=597
total_slots=6
slot1x=-799
slot1y=19
slot2x=-800
slot2y=609
slot3x=6
slot3y=0
slot4x=808
slot4y=-1
slot5x=7
slot5y=601
slot6x=809
slot6y=601
stack_slot=1
newtables_slot=grid
move_on_street=preflop
scan_mode=PW
[general]
gui_x=1025
gui_y=669
last_tab=Settings
[sites]
number_of_sites=1
included_sites=Betfred
Betfred_included_executable_path=C:\Poker\Betfred Poker\casino.exe
Betfred_included_resized_table_width=794
Betfred_included_resized_table_height=597
Betfred_included_fold_color=0xf3f3f3
Betfred_included_fold_x_scaled=270
Betfred_included_fold_y_scaled=526
[hotkeys]
number_of_hotkeys=0
send_table_under_mouse=1


Ive configured the 6 slots ..2 on my left monitor and 4 on my right one ... i can now see them all.

Whats next ??

looking better

ok, well just to get you up and running, set up a "fold+stack" hotkey, bind it to your "F" key for example.

now, as you can see, you have New Tables set up to go to the grid. so when you press Start, all tables will go to your grid slots (2-6). then you can mouse over the tables and press "F" and SaT will try to click the fold button, and then move the tables to the stack. once you've put all the tables into the stack, you can sit back and wait for your action to come, and when it does come, the table will move into the grid. then you can just play the hand normally in the grid, and when you want to fold, make sure to mouseover and press "F" to "fold+stack" the table.

if that much works, then we can tweak it further to your specific needs

Wicked !

Just tried it out ... worked great.

Ive re-configured the stacked tables so that the first 4 are on the right sided monitor .. and ive got rid of the fold+stack hotkey and replaced it with just a stack hotkey. ( might change that back after though )

Also added another stack so i have 8 now.

As per usual .. my computer hated the ipoker software .. but it seems more managable when i dont see all the tables .

Will see if it can handle 16 tables later .

Any other tweaks you would recommend greg ?

great, glad its working out. theres nothing else i would recommend, other than clicking on some of the blue labels in the program to read about the different options, in case something appeals

what does "hotkeys fire upon release" do?

Hi,

Awesome program.

I run 12 tables on a single 24" 1920x1200 monitor running Windows 7 (Taskbar visible). However, with my config ... the tables start positioning from slot1 NOT slot0? Is this right?

Below is my config:

if checked, the hotkey will activate on the key-release, instead of the key-downpress



there is no slot0. if you click Configure Grid, you can see your layout.

i assume you mean that when you press Start, the tables start in slot2, slot3, etc and slot1 is empty. thats because slot1 is your stack, and you have New Tables set to move into grid. if you set New Tables = 1, then all tables will start in your stack

hmm, so i just DL'd the program and it works fine when im set up PS but it won't even recognize my ftp table. I get to where I pull up a table and hit F7 and no matter which background etc its on, it just doesn't recognize it.

edit: I run windows 7 and even though i save the config, i get an error message saying its not being run as an admin. I close the program, re-open it and my config is gone

any help?

right click StackAndTile.exe and Run As administrator

edit: got it, im just ******ed

Just gave this a try, I set up my stack and grid but mouse clicks dont seem to move the tables from stack to grid and back again.

I.e if I click bet/call while table is in the stack it doesn't move into the grid, or if I click fold while table is in the grid it doesn't return to the stack.

The only way I can move tables from grid to stack and vice versa is configuring hotkeys?

Thanks, I assume you mean newtables_slot=1? (was grid)

enable Left Click Detection in Advanced Options. that should solve it.


yup

Ty, this sorted it If a hand goes check/check at showdown (I don't hit fold) the table doesn't return to the stack. Is there any way around that?