Hi, thanks for the betclic fix.

I still can't increase bet size by sb. I changed the config file as specified ad the advanced settings, but not working. Also tried adding the click_button_for_increase_decrease_bet=0 but still increasing by big blind. I really don't know if it's SaT or ipoker making the increase since it's built in the new software, don't know if there's some conflict there. Haven't tried at other sites.

What can I do?

p.s: I also ran into the resizing loop that was mentioned here, closed the table with alt+f4. If there's a way that you could detect that the software ran into this problem, you could try to close the table that it's making the problem (suggestion for a fix)

p.s.2 : could you add as an action for a hotkey to close a table?

Thanks

What key have you assigned to "IncreaseBet"?

Unfortunately the new iPoker client does not allow me to change anything regarding the bet sizes increments. Other sites allow me to calculate the increment and send the bet size to the betbox. However, on the new iPoker client, not only do they not expose the betbox control programmatically, there is another problem: when I try to send a basic click to the betbox, the betbox clears itself (whereas other sites will leave the current amount in the box). You can test that yourself by simply clicking one of the pot buttons to set a betsize, and then click in the betbox with your mouse. You will see the box clear

Because of that limitation, I have no choice but to simply send a WheelUp/Down click instead of actually doing the math and sending the new bet. The WheelUp gets sent to the table, and iPoker just sees a normal WheelUp and then does whatever it does. If the site doesn't respond to WheelUp, then nothing will happen. But the new iPoker client does respond to WheelUp (which many sites do), and then the iPoker client decides to increase the betsize by 1bb

I don't think people would want their tables to be suddenly closed. They may end up losing a good seat at a good table or something.

Are you still getting the resizing loop? Or did it go away? Have you tried Removing and re-Including the site?

The problem is that many times the poker site shows a popup, something like, "Are you sure you want to leave the table?" and its difficult to detect this popup because the popups all look the same. I will look into it.

This was not a false positive. I had a 3 month old machine w/ no problems, then instantly after downloading SaT, and getting that message, I couldn't even get internet tabs to function because of this virus. I had to pay Geeksquad 110$ to fix my computer, So I am not going to update SaT again. This sucks, I always purchase a year subscription from you, and I just did again last December.

First, I'm sorry to hear about your troubles. Its unfortunate that this had to happen.

Second, you originally said that Windows Defender not only detected the virus but also deleted it. So if that is true, then no virus ever infected your system to begin with because your scanner caught it and deleted it. I don't know what happened with your internet tabs. Did you take any steps to try to fix it? Maybe a simple reboot?

Third, GeekSquad is notorious for not knowing their ass from their elbow. They probably saw opportunity and took advantage of you.

Fourth, I know its a false positive because I know that I'm not spreading viruses and not writing viruses. A user's antivirus went off (just like yours) and he reported it on the SaT forums here. I immediately submitted the file to all of the virus scanners that claimed SaT was a virus. Within a few days, every scanner cleared the file as a false positive. You can see the responses in the thread. VirusTotal then reported 0/56.

I've spend countless hours helping you over skype (for free) get SaT set up and working as best as I could. You could have asked me again to help you. But if you don't trust me, that's ok. I prefer people be as safe as possible, even if that means they don't use my product. I never want to be blamed for anything that I'm not doing.

I know you don't spread viruses or malware, that would insanely stupid for your business. I either had an outbreak from something that was hidden or attached. But its fixed now, and I still continue to use SaT w/out any problems.

No worries man

Having a problem with the new update when the software tries to resize tables and/or move them. It seems to drag the window to resize but then keeps getting stuck and flicking on and off the table. It makes me have no control of the mouse because it is constantly trying to resize the table. This causes me to have to restart my computer because i start sitting out on all the games. It's happened atleast 3 different times today and is becoming very annoying and losing me money. Please can you advise me on what to do. I am playing on the new ipoker software.

Adam

First, see here:
http://www.stackandtile.com/sat/help...-switch-hotkey

No need to restart your computer.

Now, what version of Windows are you on?

When it fails, does it fail for every new table that opens? Or is it random?

First thing to always do is try Removing and re-Including the site. Do that first and report back. But make sure the mini games sidebar is turned off completely within the poker client settings

All I can do is continue to try to make the code more reliable. The problem is twofold: 1. the new iPoker client doesnt allow me to programmatically resize the table, because the graphics get cut off, and 2. in situations like this (such as OnGame), I would traditionally send a mouse click and drag to resize the table to force the table to redraw itself. But the problem with this new iPoker client is that when you drag to resize the table, the client is very "shaky" you can easily see that yourself, so sometimes it doesn't always land correctly

Thank you for the quick response.

It just seems to happen randomly, sometimes it'll be a new table, and sometimes will just happen on a table ive had on the screen for 5 minutes

I've tried removing and re-adding the site but still the same problem when resizing tables. Is there anyway you can fix this in another update or?

It shouldn't happen on an existing table, unless you mistakenly tried to resize that table yourself with your mouse. Once SaT successfully resizes a table, it has no need to keep trying to resize it, unless it detects that the size is incorrect.

But when New Tables pop up, they are likely opening with the wrong size, so SaT usually will have to resize them.

I can fix this by attempting to make the resizing code more reliable, probably by adding more delays in moving the mouse. But there are limits.

Another trick that MAY work: sometimes the pokersite will 'remember' the size of the last closed table. Try this without SaT. Open up the iPoker client. Then open up one table. It should open up at iPoker's default size. Then with your mouse, resize the table as small as possible. Then close the table. Then open a new table. Does the new table open up at that smallest size? Or back at the default size? How we can use this trick is, when you start your session, first Start up SaT and just open up one table, and make sure SaT resizes it correctly without getting stuck in the loop. Once that is successful, then close the table. Then after that, you can start your session normally, because hopefully the iPoker client will 'remember' that last table size, and open up all new tables directly to the exact size SaT needs, and therefore SaT won't have to resize. Hope that makes sense

You didn't say what version of Windows you are on?

Have tried the single table trick to make sure its the right size before i start a session however still getting the same problem. I think it usually happens when i go to drag a table into another slot, ive been careful and tried to make sure im not dragging the table bigger/smaller but still the same issue. I'm on windows 7

Adam

I just tested it and I can't reproduce the problem. When I drag the table to other slots it works and doesn't get into the loop. I also tested on Win7

Does it happen every time you try to drag a table?

Are you sure you have the mini games sidebar turned off?

Yeh 90% of time when i move the table from slot to slot its fine, the resizing loop just seems to be random. It just did it again now and the ctr+alt+shift+q command to kill SnT didnt work so had to restart computer and lose another set of SnG's.

Side bar is turned off and i have 'remember table positioning' ticked to ensure the talbes are the correct size so they don't need to be resized.

Like i said, it just seems to be somewhat random when it gos into the loop that i cant get out of, maybe its when i accidently click the edge of a table?

Adam

Yeah you may be just grabbing the edge to resize it with your mouse which would trigger SaT to fix the size.

Test the ctrl+alt+shift+Q hotkey and see if it works, it should. If you get in the loop, just keep pressing it a few times.

I will see if I can do anything to make this work better

I just tested it to try find the exact problem when it crashes, and it seems to be that 1 or 2 of the hotkeys on the table won't work, and then if i accidently click the edge it'll get stuck in the loop. The kill option doesn't seem to work when it gets stuck, but it works when the program is working, so i still have the problem of losing all my SNG's when it does go into the loop. I've switched back to the old ipoker software but it's less than ideal and hopefully only a temporary thing. Please let me know if you manage to find a fix/make the code for resizing more stable.

Adam

Ok I will let you know.

What hotkeys dont work?

Mouse right click for fold, space for call

im getting the endless resizing loop when trying to use ipoker+partypoker. just noticed on last page the hotkey to close SaT too bad i didnt see that earlier as i had to completely shut down my comp twice today while 30 tabling. on windows 10 here.

alright let me see what I can find with Apborrer and if I can't find the solution then i'll contact you

ctrlalt****q hotkey didnt work at all when just trying now had to shut down comp a 3rd time

.

When are the tables going into the resizing loop? Does it happen for every New Table? Or is it random? Are you sure you're not trying to mistakenly resize the table when it happens?

Yes this is an option as well

Steamy, was the CTRL+ALT+SHIFT+Q hotkey not working for you? Is that why you used the "Start/Stop SaT" hotkey?

Because if one is not working, I'm not sure this other hotkey would work either. My guess is that the mouse move/drag is interrupting the attempted keypress to trigger the hotkey. Usually I have to spam the hotkey a few times when the resizing loop happens.

I did not know about CTRL+ALT+SHIFT+Q and have never tried it.
Have been using "Start/Stop SaT" long time in case something goes wrong with SaT and I can not control mouse.
And it has always been working. Just one press on hotkey and SaT always stops.

Edit: also with 2.86 I never have resizing loop anymore if HM2 HUD is not on table.

Ok cool

Ah good catch!

Apborrer and coinflipper, are you using HM2 HUD in conjuction with the new iPoker? And if so, can you try turning it off just as a test and see if it changes anything?