Did you just grab the latest release of HM? Can you tell me the version? I've never heard of anyone having this issue ever and I've been told of every major issue that has come through support since LB was created. I'll ask the developer as well, but I'd minimize what you do have going, and wait for it to load. HM2 is resource intensive, but it will swap resources as needed.

I'm running the trial version of 2.0.0.7628... it works fine on HM1. Perhaps it's more of a HM2 problem.

Hm2 is much more resource intensive than HM1. Did it finally load for you on HM2?

Nope.

I have Leakbuster for HEM but now I've switched to PT4 (so after a session I transfer my hands from PT4 into HEM so I can still use LB). When I run Leakbuster, one of the stats it shows me is Agg %.

PT4 only has Aggression Factor and Aggression Frequency. I imagine Agg % in Leakbuster for HEM is equivalent to the Aggression Frequency stat in PT4? Is that correct?

I've not heard of any loading problems before, but probably a very small % of people using XP. So you can operate HM2 ok with the resources you have, but LB won't load? HM2 just put out an update yesterday. Have you tried the recently release?

Tried to answer this multiple times yesterday and 2+2 keeps timing out. Ugh.

Agg% (and I thought it used to say this) is equivalent to aggression frequency.

Thanks for the reply.

I'm trying LB but as soon as I click it on HM it already crashes... just updated HM to 2.0.0.7649

System.NullReferenceException: Object reference not set to an instance of an object.
at A1wWiTPR1JBYBRa14P.BhmMRv7QWyLmStAwbq.B7fDHo7sY()
at LeakBuster2._5.UCStep1New.RefreshStep1NewData()
at LeakBuster2._5.UCStep1New.0k07etlyO(Boolean , Stake )
at LeakBuster2._5.UCStep1New.16BOtcktJ(Boolean , Int32 )
at LeakBuster2._5.UCStep1New.eKx10pxar()
at LeakBuster2._5.UCStep1New.ZpYIutjjP()
at LeakBuster2._.Mainf.15RrecK7dm()
at LeakBuster2._5.UCStep1New.Init()
at LeakBuster2._.Mainf.InitializeLeakBuster()

I try to run a complete analysis and it encounters unhandled errors nonstop

Yes, they just released this a couple of hours ago. Is your DPI setting in windows over 100%? Someone a couple of hours ago that had this in their local settings reported this issue.

We put up a .25b no-limit leak buster fix for HM2 that will resolve this issue. You can run check for updates in leak buster if it doesn't auto find it on startup. Either that or you have to go to a much older version.

Couple of important notes on .26 no-limit update. If you don't have it you can click on check for updates in Leak Buster (HM2).

With the new step 1 interface, we added the ability to just see a complete list of leaks instead of one leak at a time (similar to the old step 1 method where you can see the complete list in one view). You can switch back and forth between complete list view and single leak view. It's available by clicking here:



Also, if you don't want to load video, module, quiz content when viewing leaks in step 1, you can turn this setting off and manually load the content when you want to. This will speed up browsing through leaks. Click on settings in step 1 and then click off as shown below:



Any questions or suggestions on the new interface, please let us know.

How does leak buster come up with optimal ranges? Is it a generic range based around winning players for all games/stakes or is it tailored towards the games/stakes in your database?

For example, I would imagine the desired range for your WTSD% may be very different if you playing 10NL compared to 400NL, are the tendencies of the specific player pool taken into account?

It depends on the version you're using. Limit LB uses a couple of different ranges depending on the stakes you're playing because the stats differ so much from micro/small stakes to mid/high stakes. No-limit Leak Buster uses a lot of similar stats with different significance impacts when it hierarchically ranks the significance of your leaks.

The stats themselves come from hundreds of millions of hands across a couple of different major poker sites. The recommended ranges are based on the number of winning players that fall into specific ranges in a ratio to the number of other winning and losing players that fall into other stat ranges. So you will see for example, winning ranges that are not in LB's recommended range because most players can't maintain a long term winrate at these stat ranges. Doesn't mean it's not possible, and LB won't put weight into as a leak. It may list it as a potential leak or area to consider though.

It's even more complicated than that, but that's in general what it's doing and how it comes up with stat ranges. Keep in mind, stat ranges are just 2 of the 8 major steps in Leak Buster. Most of the value is going to be in post flop analysis and filtering etc...

News Update
First Beta of Leak Buster Limit for HM2 will be available for HM2 in the next HM2 update, which is supposed to be before Christmas (don't mark my words). Bryce Paradis did the video, and written content for this Leak Buster. If you have LB Limit for HM1, your license will be transferable to LB Limit HM2.

Leak Buster Limit for HM2 is now available in the latest HM2 beta update.

Bought Leak buster. Looks good.

So when a leak is identified and I take measures to stop the leak as advised is leak buster showing the progress in some way? (like you 5000 hands ago -> that bad ..now improved->)

Cause Im a bit confused as it seems the leak buster manual is not up to date and issued for older versions(pictures not matching with the program on hand)? Or maybe not lol
It says the first and last comperative example I have to look on the left where it says first run date. Nothing there..

(Also I cant find matching explanations what the numbers mean beside the arrows. Or what the blue, green, red dots and the numbers that show up when hovering over it mean.)
edit: ok http://www.youtube.com/watch?v=eWEck...layer_embedded <- that helped a bit with the colors. Stil lthe first question about the improvements and how to track I would like to hear please

The leak will move up and down the priority list and that's what the + / - thing indicates. Your leak is -3 after next analysis, it's dropped 3 spots. There's an over compensation check that will also highlight areas where you're perhaps adjusting too much.

With the new release last week, the interface has changed quite a bit. Updates to the manual are still in place. But besides step 1 (and a lot of step 1 will still apply), everything else will still apply as well.

The explanations are in the manual on pages 13-16. They are showing you average win rates for those stat ranges.

Thanks. Was a bit overwhelmed at first
Its a great programm to work with and get feedback.

No problem. I believe next release the updated manual will be out. But stick with the info in step 1 for now and you'll get a lot of what you need.

I notice leakbuster isn't including every hand for my username. Is there anyway I can get leakbuster to recognize all hands i played under a screen name? Or is it common for leakbuster to miss hands and theres nothing we can do about it?

Nvm figured out that its cause leakbuster only counts it when there are 5-6 players.

NP. Ya, 5-6 players for 6-max and 7-9 for full ring. Once you set these filters, then the numbers will match up for you.

One question I have about leakbuster is for each limit is their new leak ranges? Or 2/4 cent has the same info as 25/50 cent?