Hello again,

I´ve been thinking about this for a while and I am pretty sure, a lot of users would find this very useful.
I would like to have a graph, that shows my street-by-street equity, weighted with the money I actually put in in each street. Basicly an aggregated sklansky-bucks-graph.

Imagine a hand, where I have AA and I get 70% (70bb) of my stack in pre, and 10bb on each street. Villain was drawing to the a flush, which got there by the river. So 90% of my money I got in good.
Pre I had 83%, on the flop 63%, on the turn 20%. (I ran AA vs KQ with low flush cards) So my true equtiy in this hand would be:
0,83*140bb+0,63*20bb+0,8*20bb+0*0,2 = 144,8 bb
While my villain on the other site would have made 55,2 bb in that hand.

I am sure, that such a graphwould give me a much better idea of my performance than any other graph.

The replayer doesn't support seating preferences.

The freeze may be caused by a firewall, please check this: http://faq.holdemmanager.com/questio...%28Firewall%29

It should be no problem to use the code on a new computer, see this:
http://faq.holdemmanager.com/questio...Holdem+Manager
http://faq.holdemmanager.com/questio...+-+Backup+Tips

We have already written up feature requests for different EV calculations but i can't give you any ETA for this.

Is there anyway to make notes on people while playing when you have the note icon hid in HM2 settings?

Or is there any way to place the note icon after a certain stat/position?

ummm really basic question. how do i set up reports to show only 6max?

The easiest way would probably be Active Session > Right-Click > View > select the player name from the top left and then right the notes in the top right section of the live hand history viewer.




There is not currently a way to determine where in the HUD the note icon will show up if you are using a single panel. If you add a new panel to the beginning of your HUD you can then fine tune your HUD and note icons positions. It is not possible to right-click and drag the note icon because it will open the Line Analysis window so you need the AutoRate icon (*) enabled so you can right-click on that to drag it where you need it. if you don't normally show the autorate icon you will have to enable it so you can position your hud elements and then disable it again under the HUD Options > Config Properties > HUD Settings > [x] Show autorate icons.

You can use the More Filters > Basic Filters > Players Between, but that will also include full ring tables that had 6 or less players.

More Reports > Winnings Summary HM1 will do the same thing as the 'Players Between' filter mentioned above.

To group by actual table type instead of players dealt in to the hand:

- More Reports > Winnings Summary will group the results by actual table type and then you can select the '6max' size from the upper datagrid of the report and review the hands from that table in the lower datagrid.

HEM2 is working fine on all my 9 player tournaments, but isn't working for the 6 max that I'm currently playing. any help?

When opening the Cash Games tab I now get that message:

Thanks

Thanks for that fozzy, I got the note icon and autorate icon on a new panel now but they are not dragable.

If I drag them, the rest of the stats underneath will drag too using the same setup as in that screenshot.

What site? What table type? Merge, 6max MTT? If so, it is a known bug with some of the MTT's.

If not, I need more details, screen shots, and sample hands:

Please reproduce the problem and email:
- a screen shot of the table/desktop
- a hand history for the table
- a screenshot of the Active Sessions tab
- and a screenshot of the table created by running winspy - http://www.catch22.net/software/winspy-17
- how to use winspy - http://www.screencast.com/t/wLo1BcV7hc8v

Please zip and email the requested files to hm2support@holdemmanager.com with a link to this thread and your forum name.

Go to the Tourney > Reports tab and make sure you have not added any $ or Rake stats to the report. The Reports in the Tourney section deal with chips and adding currency stats can cause this error.

If you continue to have problems, try the following -

Filter > Clear and then Filter > Use for all, even if it doesn't appear you have filters set.


If none of that helps, try the following:

1. Note your database connection settings from the database management (server name: 127.0.0.1, port number: 5432, login name: postgres, password: postgrespass)
2. Close holdemmanager
3. Go to the folder config in the holdemmanager installation path
4. Rename the file holdemmanager.config to holdemmanager.config.corrupt or sth. like that.
5. Under Vista make sure that UAC is switched off or check the administrator settings for holdemmanager.exe, hmhud.exe and dbcontrolpanel.exe under properties->compatibility
6. Restart Holdemmanager
7. Holdemmanager reinstalls and displays some messages and warnings
7a. A new holdemmanager.config file is generated
8. Reconfigure your database connection
9. After successful start reconfigure your Auto-import settings
10. Table manager should start again.

I am sorry, I should have been a little more detailed in my previous instructions as to how you would have to adjust these once configured. Because that is the first/main panel you have to right-click and drag the main panel (note and autorate) first, then you can drag the the other secondary panel (stats). This may be a bit annoying and take some back and forth fine tuning from panel to panel (move the note/autorate panel, move the stats panel, and repeat...) but it is the only workaround I could think of for your situation.

Hi,

I have the latest version of HEM1 installed. Was working fine playing cash games on Betsafe skin of Ongame earlier today. Then tonight I played tournements on Betfair skin of Ongame while playing cash games on the Betsafe skin. During this time my HUD only worked for Betfair and no HUD or hands were imported for Betsafe. Having closed Betfair and re-installed HEM and tried playing on Betsafe only, the tables are found in the table finder but no hands are being imported. Please help.

Hi,

Apologies if this has been covered, I've searched and googled but no joy.

Basically I have been playing Zoom on Stars on and off since it was introduced and never really worried about getting my HM1 to work with it as I wasn't taking it particularly seriously. I've now updated my HM1 and have the HUD and import working fine. It doesn't seem to have found all the hands I'd played previously though and I'd like to import them, I can't see them in my Stars HH folder though (it's empty?). Anything I can do?
Thanks.

Edit: NM, I found the HH's in the HM archive and it seems I can import them from there.

Nevermind, I found the solution in another thread. I didnt close both skins, doh.

The Ongame client locks the handhistory file while he is open.
This means that the auto-import can't move the file while Ongame is running.
Workarounds:
- Close the ongame client and let the auto-import run for at least 15 min. more (the archive time)
- Start the HM auto-import before you open the ongame client for a new session.

I am sorry for the delay in reply but thank you both for letting me know you solved the problems on your own.

Can you provide me a link to help me move my hem2 database from my old pc to my new pc.

Also , I notice today that my postgreSQL 8.4 program was 105 GB, is that normal?

Both my old and new CPU runs windows 7 home premium 64 bit afaik.

My hem2 is full version.

Any help is appreciated.

backup/restore - http://hm2faq.holdemmanager.com/ques...onfigs+work%3F


Are you looking under the Control Panel > Programs and Features? If so, that is not accurate and your new computer without any database will say the same thing after you install postgresql without any databases. Mine says 108gb there which is completely false since I only have 160gb SSD and have 90+gb free space.

To get the actual size you need to check the properties of 2 windows folders: C;\postgresql\data and C:\Users\Owner\AppData\Roaming\HoldemManager\Datab ase

If you want to know the actual size of any windows folders I would suggest you use http://windirstat.info/ or space sniffer or tree size.

I'm having a problem since the new db update that you released.

When I'm playing and I click the note icon on the hud to take a note it freezes my system up. Is this a known issue?

I meant ZOOM on Poker Stars.

My HUD does not work for ZOOM on PS. The hands get imported into the DB. The HUD works for normal tables.

since the update my HUD dosn't recognize my "preferred seating" in zoomgames (on PS) anymore. works fine on other tables.

Unfortunately its not a known issue. It may be necessary to reconfigure firewall exceptions after installing the update: http://hm2faq.holdemmanager.com/ques...%28Firewall%29

If that doesn't help please try to write a note in a new empty database.

You need to start the Stars client as administrator.
And see this: http://hm2faq.holdemmanager.com/ques...rs+Zoom+Tables

HM1 or HM2?

In HM1 you need to add your Stars screen name under Hud Options -> setup hero names.

HM1 it seems all the sudden that my zoom hands are importing at EST, and my normal table hands are importing when they should (CET). If I adjust the import time then my normal table hands are messed up and my zoom hands are ok. Just yesterday I played a zoom session and everything was fine. I play today and everything is 6 hours off without changing any settings, updating any software other than table ninja, or reinstalling. Running 1.12.10b

I dont know if stars HH files have always written both your set local time and the EST, but it seems to just import the wrong one in just the case of my zoom hands.

is here any updates for HEM 1 ? my HUD not working at PokerXe..(enet,Merge etc...)