Version 0.44 2/9/07

1. Fixed problem with Auto-Preset the bet, when no Displays were enabled.
2. When program is minimized, it is now reduced to the system tray, and not the task bar.

The source code is included with this version (FullTiltShortcuts.ahk).


Download here .
Documentation is here .

I did change this with the new version as some people found it confusing with the old version, and I thought this way would be less confusing, but it does require one extra key to make it work.

I suppose I could set it up where the following keys would have these actions with regard to the preaction operation:

fold key: checks any LEFT side preaction button
OR
fold/check key: checks any LEFT side preaction button

call key: checks any RIGHT side preaction button

and this way only 2 keys are needed... but unfortunately the names on the pre-action checkboxes don't match very well with the key names.

Let me know what you all think???

nanochip

#2 should be working for you in version 0.44

I'm not able to duplicate your problem with Auto-reloading. Please try erasing your .ini file in the Settings folder. This will reset the settings to default. Try it then and see if the reloader works. It should reload when your stack drops 2% (only works on NL and PL tables). If it works with the default settings, then I'd like to determine what setting you might have that is keeping this feature from working.

nano

I'm not familiar with this mouse, but have you tried putting F8 as the selection for button3 in your mouse setup program, and then button 3 would "press" F8 when clicked. (In this case, you would leave F8 in the Street betting tab of Shortcuts).

Give version 0.44 a look, and see if it works for you.
nano

Nanochip you freakin rock. FTTO and FTS make my poker life 10000x easier on a daily basis. TY.

Hey dave... the latest version includes the source. If you uncheck all of the options in the installer, it will unzip the files to the folder you specify.
nano

I have the same problem, and reverting to the default settings didn't help. This feature did work in previous versions. When I click the MButton, the reload window pops up but then no options are chosen for me (I still have to click "full buyin" and then "OK"). Does it require image recognition? My FTP tables are modded, including the boxes that the names sit on top of.

EDIT: This is for NL.

I think a spatial arrangement that you describe, above, is easier. One solution is rename the commands something like: left boxes/buttons, mid boxes/buttons, etc.

Either way, your programs is tremendous. Thanks.
-Tera

I believe the mods probably are the problem. In order to do a manual reload or an auto-reload the program has to read the hero's stack size using image recognition from the Hero's player box.

Mods should be ok for cards and for the table felt color (as the program can be calibrated to the felt color). But buttons, checkboxes, dialog boxes, and the player's box will need to be un-mod-ed for some features to work correctly.

Can you modify the script to just reload to the max if it can't get the exact stack size? I'm fine with not having an autoreloader, but the manual reloader (which did work in previous versions) is the most valuable feature in the script to me.

The manual reloader works in this version, with the added benefit that short stack players can now use it. You can now set the amount that you want to manually reload to.

I've been referring to the manual reloader the whole time; it didn't work for me.

I made a quick hack to the file by copying and pasting the "full buyin" code into the "can't find the stack" section like so, at line 4063:

from this

<font class="small">Code:</font><hr /><pre>
else
{
if (vStack &lt; 0)
{
SoundBeep, 2000, 100
SoundBeep, 1500, 100
}
}

</pre><hr />

to this

<font class="small">Code:</font><hr /><pre>
else
{
ControlGet, vFlag, Enabled,, Button2, ahk_id %pWinId%
if NOT vFlag
{
; Send enter to the cancel button
ControlFocus, FTCSkinButton2, Get Chips ahk_id %pWinId%
;Sleep, -1
ControlSend, FTCSkinButton2, {ENTER}, ahk_id %pWinId%
WinWaitClose, ahk_id %pWinId%,,5

; re-enable this feature if it was enabled
ActivateTableOnMouseOverEnabled := vTemp
Return
}
;click the Maximum Buy-In Button
Control, Check,, Button2, ahk_id %pWinId%
vOkToCloseDialogBoxFlag := 1
if (vStack &lt; 0)
{
SoundBeep, 2000, 100
SoundBeep, 1500, 100
}
}
</pre><hr />

Probably not optimal but it does the trick for now.

Since using the FTS.exe version, FTP has been crashing and closing about 1x/hr. I am also running current versions of:
FT Planner (with 16 open tables)
FT table opener
P. Tracker
PAHUD

Any advice appreciated.
-Tera

Tera: I run the same programs (except without FT planner). When do the crashes occur? When you are playing or just observing? If while playing, does it happen at a particular time, like when you click something?
nanochip

I just upgraded to the .exe version and gave it a shot.. Full Tilt crashed on me about 5 times in 100 hands 8 tabling... It never crashed with the old version except it would freeze and give me yellow screens many times...

I wasn't using FT Planner but Pokeraidewindow manager instead.. and no FT table opener either..

It was happening as playing... no noticeable particular time...

Version 0.45 2/11/07

1. Changed the operation of the system tray icon so the program will be restored when double clicked.
2. Improved the closing of the program from the system tray.
3. Changed the operation of Manual Rebuy for NL games. If the NL Rebuy Amount is set to 100%, then the hero's stack will be reloaded to max even if hero is sitting out (when the stack size can't be read from the player's box).
4. Increased some safety time margins to prevent problems when clicking Full Tilt buttons.


Download here .
Documentation is here .

I've made a few changes in version 0.45 that may help...
If you still notice the problem, let me know if it happens just as you click on a button (like FOLD or CALL). Then try turning off the displays, and see if it still happens.

Also, let me know what speed computer you are using, and also the speed of your internet connection.
nanochip

Has a "clear betbox" hotkey ever been added to the script? For no limit having some predefined bets are one thing but there will be a lot of times when those don't cover it.

I am playing, always. The table in focus turns yellow, I get an error msg: "FTP has encountered a problem and must close". I have not noticed anything more specific. That is, I'm pretty sure that it is not exactly at the moment I am hitting a button, but I am mult-tabling and and have always just acted on some table. I use fixed bets and your new display of betting % and $ suggestions. Machine: Dell, Latitude, D610 1.8 ghz pentium 2, 500mb memory.

Is there an alternative to FT Planner? It keeps newly opened tables from cluttering up the playing area. And it is great having 10-12 prospective tables with stats, in addition to the 4-6 that I'm playing.

Thanks.

Tried the latest version tonight. I turned off the OSD and had the first crash about 1 hr in 6-tabling (with 10 other open tables). It happened after I used the fold key (left arrow) but I am using those keys constantly so it may be a coincidence.

Restarted and crashed within 2 minutes (this time only FTS and FTP were open).

Forgot to mention in previous post, high speed connection.

Thanks.
Tera

You have given me the clue I needed! Thanks! I've mostly been testing with using the mouse to click on the fold button and not a key assignment.

I believe I know what the problem is and I should have a fix for this soon.

In the meantime, don't use the key assignments to fold/call/check/bet - or if you do, wait a few seconds after activating a table (until the on screen displays stabilize for that table).

Using the mouse to click any of the buttons should be fine.

Version 0.46 2/12/07

1. Fixed problem detecting number of players at some tables.
2. Fixed problem of the Full Tilt appliction crashing if action keys were pressed quickly right after a table was activated.
3. Changed which keys activate the Pre-Action checkboxes (on Actions1 tab), so that the number of keys needed is minimized.

If you use the Pre-Action checkboxes, be sure to check out the new key assignments on the Actions1 Tab.

I believe that #2 if fixed, after testing for several hundred hands. However, if you use action keys (on Actions1 tab) to fold, check, and call (etc.), you many want to confirm that it works on your computer before using action keys at high stakes.

Download here .
Documentation is here .

Tera,
Please try version 0.46 and let me know if this version solves it for you.
nanochip

Fidodell,
Please let me know if version 0.46 solves the problem you are seeing.
nanochip