Bike is in pretty good shape, It will probably be tough to sell it on here but I'll give it a try, I'm located in S.Fl. area. I assume shipping would be too expensive so I prefer to stay local, I'm looking for around $1,100, They are usually sell around $1300 on eBay used. New your looking at around $3,000.

It's a top of the line bike, Hydraulic disk breaks, Dual suspension.

bump

Nice Bike. If you want to have a better chance at selling this thing here I'd suggest you list some more information. Starting with year of the bike, year you bought it, with size of the frame and component list, both stock and anything you upgraded, what kind of riding it has been exposed to, etc.

I'd consider buying this if it was local to me, but would need a lot more info.

ok ty

straight from this Link http://www.specialized.com/us/en/bik...pitchpro#specs

TECHNICAL SPECIFICATIONS
FRAMEM4 Pitch frame, M4 tubing, double ORE downtube, DMD front derailleur mount, sealed cartridge bearing pivots, replaceable hanger, bolt on cable guides, 150mm travel
REAR SHOCKFox RP2, 2-position switch 1) ProPedal 2) full open, rebound adjust
FORKRockshox Pike 351 for Specialized, 140mm travel, coil U Turn, Motion Control damper, disc only, alloy steerer, rebound adjust, Maxle 360 included
HEADSET1 1/8" threadless, black steel cups, loose ball bearings w/ seals
STEMSpecialized 3D forged alloy, 8 degree rise, 31.8mm 4 bolt clamp, S:60mm, M/L:75mm, XL:90mm
HANDLEBARSSpecialized mid rise, butted, 31.8mm, 660mm wide, 8 degree up, 8 degree back sweep
TAPE/GRIPSSpecialized Enduro, dual density
FRONT BRAKEAvid Juicy 3 SL, hydraulic disc, G2 Clean Sweep 203mm rotor
REAR BRAKEAvid Juicy 3 SL, hydraulic disc, G2 Clean Sweep 180mm rotor
BRAKE LEVERSAvid Juicy 3 SL
FRONT DERAILLEURShimano M580 LX, E type
REAR DERAILLEURSRAM X-9, mid cage
SHIFT LEVERSSRAM X-5, 9-speed trigger
CASSETTE FREEWHEELShimano HG-50, 9-speed, 11-34t
CHAINKMC HG 73 w/ reusable Missing Link
CRANKSETShimano M532, 2pc design, 9-speed, replaceable rings w/ alloy outer
CHAINRINGS22S/32S/44A 4mm thick outer, 4 bolt 104/64mm
BOTTOM BRACKET Shimano outboard cartridge bearing design integrated w/ M532 2pc crank
PEDALSShimano 505 SPD, reflectors and cleats
RIMSDT-Swiss 445D, 26", double wall disc, pin joint, eyelets, 32h
FRONT HUBSpecialized Stout disc, sealed cartridge bearing, 20mm thru axle, high/low flange
REAR HUBShimano M475L, 32h, 9-speed cassette
SPOKES1.8mm (15g) stainless, black, alloy nipples
FRONT TIRESpecialized Eskar Control, 26x2.3"
REAR TIRESpecialized Eskar Control, 26x2.3"
TUBESSpecialized, 1.2mm, schraeder valve
SADDLESpecialized Enduro, 7mm hollow Cr-Mo rails, SL foam
SEAT POST2 bolt micro adjust, 6061 alloy, black, 30.9 x 350/400mm
SEAT BINDERAlloy collar w/ QR, 34.9mm clamp ID
NOTESProtective clear coat, derailleur hanger, reflectors, owners manual

Well done. For anyone interested, considering this thing looks hardly ridden, and definitely not ridden as hard as it should have been this looks like a pretty solid deal.

There is a saying in mountain bike circles, and probably in most biking circles, that goes something along the lines of "the best $1k bike you can buy is a 5 year old 4k bike." Obviously the numbers are interchangeable to fit the situation, but the point is, if you can find something used that was taken care of , it is usually a much better value than buying new when it comes to the quality of the bike for the money.

GL with the sale OP.

(for the record no affiliation with OP in anyway, just like bikes and saw a nice bike being under repped)

used to have the same bike more or less (other specs) its a very solid mtb where u can do downhill or regular mtbing. Has pretty much top brand components (juicy breaks,pike frontfork and fox rear shock). Also not affiliated with op but its a very good deal.

thanx guys, Ya the bike is a a beast.

I got an offer on eBay for $1300 but I would have to ship it which is a hassle.

Sold you can lock it up