Open Side Menu Go to the Top
Register
Table Tamer - Multi-Site Tiling and Hotkeys Table Tamer - Multi-Site Tiling and Hotkeys

02-10-2015 , 09:36 AM
Quote:
Originally Posted by pokecancer
I don't get the first sentence. I guess you meant you can't right click the HI HUD, but what do you mean about the focus? Do you have a hotkey linked to right click?

Unfortunately, the mouse wheel doesn't work on SWC.
Right clicking on HI hud when TT is open does not bring up the menu. Right click works TT is closed. TT is preventing HI from picking up the right click somehow.
02-10-2015 , 05:25 PM
Quote:
Originally Posted by pokecancer
Are you sure the graphics were correctly configured? TT changes the buttons to a blue color so it can recognize the table's status. If it doesn't find the color for the fold button, it will press call instead, because it assumes call is not visible. You can shut off check is fold when possible, and the issue won't happen. I will try to replicate it during my next session.
My buttons do not turn to different colors, only the overlay of the table. Should they? I'm playing in Bovada.
I just turned off that option, let's see if that stops. It happens very rarely tho..
02-10-2015 , 10:07 PM
Another question, any way to make the Fold Now button work on zone poker?

Thanks again. Let me know to where I can send a donation.
02-10-2015 , 10:26 PM
Got my new gaming rig setup and having some TT issues =[

A. If I manually click the fold button it will go to the next table in queue, if i click my mouse buttons for fold/allin it will not go to the next table. Session was on Carbon/BCP
B. Sometimes it appeared to be stuck on a table where the action wasn't yet on me.

afaik my settings are the exact same as my previous computer, everything running as admin, client focused options turn off, etc. really at a loss as to why it isn't working properly. Besides that everything seems to be working just fine
02-11-2015 , 12:59 AM
Quote:
Originally Posted by Sasquatch
Currently using Windows 8.1. Installed Table tamer and I get this error message when I go to open it:

"There was an error while loading Table Tamer. Table Tamer will exit now. Please send your log file to support. Specified cast is not valid."

Any help would be greatly appreciated.

Many thanks!
Was there a mention of Slimdx in the error message? There is a section on the help page at the TT website that covers that.

Otherwise, if you press windows key + R, a box should pop up. Enter %localappdata% in the box and click ok. It will bring up a folder. Then, find the table tamer folder. Email me the .log file to tabletamer@tabletamer.com
02-11-2015 , 12:59 AM
Quote:
Originally Posted by PandaLife
Thanks, yeah I'm playing cash. Sent you the logs now, so hopefully we can figure out the problem
I sent you an email.
02-11-2015 , 01:07 AM
Quote:
Originally Posted by Ponies
Right clicking on HI hud when TT is open does not bring up the menu. Right click works TT is closed. TT is preventing HI from picking up the right click somehow.
I am assuming you mean on Bovada. I use it all the time on Bovada and right works fine for me. I think you have a hotkey linked to your mouse right click that is blocking it from working.
02-11-2015 , 01:08 AM
Quote:
Originally Posted by liramusic
Another question, any way to make the Fold Now button work on zone poker?

Thanks again. Let me know to where I can send a donation.
Shut off 'Enable Fold and Show' in Bovada settings. You don't have to send a donation. Thanks though.
02-11-2015 , 01:21 AM
Quote:
Originally Posted by 300zxrider
Have you considered adding the option of predefined bets based on the game type (6-max, full-ring, heads-up)? I feel like I've read this question before, but my searching skills aren't the best, unfortunately.
It isn't really feasible, because on most tables I don't know the game type. I could add a filter that searches the window title for a phrase like '6-max', but I am looking at ACR and not all tables have it in the title.
02-12-2015 , 04:27 AM
Table Tamer is excellent software! I am having an inconvenience come up where when I stop and start table tamer it will rearrange my tiled tables to a different order. I need to stop table tamer briefly each time I add a new table in order to get my HUD software (HEM2) to recognize the table (via table finder). I have tried different settings and locking windows, but I can't get the tables to stay in the same order whenever I stop and start Table Tamer. Is there a way to do this?

Also, for the xbox controller input using right stick as mouse the vertical sensitivity is much higher than the horizontal sensitivity. I just switched to the left stick as mouse and that works though.

Thanks for your help.
02-12-2015 , 08:28 AM
Hi i try to install table tamer on FTP and i have a few issues:
1) the predifined bets only works in the first hand i play when i start the soft, the rest of the times don´t works. I change the region/language to english but nothing happens. (the hotkeys works ok)

2) the autotimebank doesn´t works

3)if i unselect the option in FTP of "disable table on action" like you said on your web, how can i do to aplication stay on focus when is action, what is that i want?

4) the scroll wheel doesn´t work with 0,5bb...i have to desactivated and use the option in the FTP soft

thanks for all
02-12-2015 , 02:37 PM
hi guys i need some help. please contact me on skype (stosskugel8). i pay $$$ for any one helping me to set this software up. thanks in advance
02-12-2015 , 04:09 PM
Still having problems with it betting 2x pot in 3bet pots on BCP. I sent my logs in 4 or 5 days ago just wondering if you had a chance to look at them.
02-13-2015 , 06:17 PM
I've had an issue where if I right click when my tables are active I get a few error popups and Table Tamer loses some functionality, thus requiring a restart mid session.

Here are the popups I get:



Any ideas on what is causing this?
02-13-2015 , 11:02 PM
Quote:
Originally Posted by Labneh
Table Tamer is excellent software! I am having an inconvenience come up where when I stop and start table tamer it will rearrange my tiled tables to a different order. I need to stop table tamer briefly each time I add a new table in order to get my HUD software (HEM2) to recognize the table (via table finder). I have tried different settings and locking windows, but I can't get the tables to stay in the same order whenever I stop and start Table Tamer. Is there a way to do this?
What site are you trying to run the hud on? Bovada? I just tested out Bovada Card Catcher because I assume that is what you are using. I had no problem attaching to the tables in HEM2.
1)What happens when you try to attach to the table while TT is running?
2)Is your layout mode set to disabled in TT?
3)Does disabling borders in settings/overlay allow HEM2 to attach? Stop and start TT after disabling.
4)Also, if disabling borders works, turn the borders back on and go to settings/misc and turn on old borders (stop/start as well).
5)What version of windows are you using?


Also, for the xbox controller input using right stick as mouse the vertical sensitivity is much higher than the horizontal sensitivity. I just switched to the left stick as mouse and that works though.
I will make a note to look into this soon.

Thanks for your help.
Np.
.

Last edited by pokecancer; 02-13-2015 at 11:19 PM.
02-13-2015 , 11:06 PM
Quote:
Originally Posted by sanjusto77
Hi i try to install table tamer on FTP and i have a few issues:
1) the predifined bets only works in the first hand i play when i start the soft, the rest of the times don´t works. I change the region/language to english but nothing happens. (the hotkeys works ok)
If it works once and never again, it sounds like something stopped functioning in TT. Click the ? in the main window, and send me your logs.

2) the autotimebank doesn´t works
Are you using the default graphics on FTP?

3)if i unselect the option in FTP of "disable table on action" like you said on your web, how can i do to aplication stay on focus when is action, what is that i want?
Settings/Focus/Cycle to most urgent is the option you want. You may also want to enable Steal Focus From Other Apps.

4) the scroll wheel doesn´t work with 0,5bb...i have to desactivated and use the option in the FTP soft
TT only scrolls by BB for FTP.

thanks for all
Np.
.
02-13-2015 , 11:07 PM
Quote:
Originally Posted by Mckittrick19
Still having problems with it betting 2x pot in 3bet pots on BCP. I sent my logs in 4 or 5 days ago just wondering if you had a chance to look at them.
Sorry, but I haven't been able to look into this yet. I have a couple of questions that I will PM you.
02-13-2015 , 11:09 PM
Quote:
Originally Posted by matt0216
I've had an issue where if I right click when my tables are active I get a few error popups and Table Tamer loses some functionality, thus requiring a restart mid session.

Here are the popups I get:



Any ideas on what is causing this?
I would need to see the logs to understand what the exact cause is. Click the ? in the main window, and send me your logs please.
02-16-2015 , 02:26 PM
Hi. Tried to search this thread for an answer but came up short.

First, love the software and the bet sizing hotkeys, etc., very useful. I'm playing HUSNG on Bovada and it seems to close the tournament before I have the option of rematching villain. How can I disable this? I unchecked 'Close Tournaments' under Automation in the settings but that didn't seem to help.

Thanks!
02-16-2015 , 05:16 PM
hi, sorry for my english, play on People's Poker .com (ENET) are able to configure hotkeys: fold / call / reise, but I would add two new commands add rebuy end time (see screen) after settings the regions as I do to assign a keyboard? I would pretty much one clik add chips and with a click to start the time bank, is possible?
thanks to those who give me a hand

02-16-2015 , 06:43 PM
My auto time bank does not work on bovada. When i push time bank manually, it will not work either. Auto time bank does work around 20 percent of the time however.
02-17-2015 , 02:33 AM
Quote:
Originally Posted by pokecancer
What site are you trying to run the hud on? Bovada? I just tested out Bovada Card Catcher because I assume that is what you are using. I had no problem attaching to the tables in HEM2.
1)What happens when you try to attach to the table while TT is running?
2)Is your layout mode set to disabled in TT?
3)Does disabling borders in settings/overlay allow HEM2 to attach? Stop and start TT after disabling.
4)Also, if disabling borders works, turn the borders back on and go to settings/misc and turn on old borders (stop/start as well).
5)What version of windows are you using?
I am using Bovada Card Catcher and HEM2 on Windows 8.1.

After playing around with it some more it looks like I can attach to the table if I quickly snap the mouse over to the table and release right after I click the target cursor on Table Finder. When I am not seated at the table there is more leeway with how much time there is to attach to the table before it won't let it attach. When Table Tamer is stopped then there is no problem attaching to the tables. It looks like disabling borders didn't affect anything.
02-17-2015 , 03:28 AM
I am currently unable to select any of the focus type radio buttons in the focus settings tab. When i click it puts the circle in and deselects leaving a blank selection. This is messing me up when i play 888 as i am now having focus issues. Any resolution for this?
02-17-2015 , 12:36 PM
Is there a way to designate a slot assignment for new tables? What i'm trying to achieve is to have a 'new tables slot' like StackandTile has and then have a separate stack slot. When playing on multiple sites I'd like to be able to have all of the tables that I open up and am observing in the new tables slot. I'd like all of the tables where I'm sitting at an empty table in the stack slot. I'd then like to be able to send a table from the grid (tables i'm playing) or the stack (where i'm seated at an empty table) to the new tables slot (which will be another stack of for observed tables.)
02-17-2015 , 03:57 PM
I'm guessing the all in hot key on Bovada doesn't work since there's no actual all in button? When I use it, it fills the bet box with 9999999 but if I have a 400 stack for example, it will only change the raise amount to 99.

Sorry if this was addressed before. I didn't see anything when searching.

      
m