i give 50 dollars for making placemint work on bwin on a new computer

is there any setting what i can use for not reopen hud tables all the time?

I would like to know if there is any software to fix this issue or why I cannot tile the tables on pokerstars the way I want it to.


Someone suggested me this this. I would like to know if it would work for what i like to do.


I have a 24' monitor thats 1920x1200 resolution. Basically when the first 4 table shows up, i tile it so you see each of them full size without having to make tables smaller. Then the 5th table comes up, 6th etc. I usually play around 20 table at once. So what I would prefer is each time a table pops up, it show up on upper left corner, then upper right corner, lower left corner then lower right corner. The issue with this is it never happens even after I save the layout on pokerstars. Thus i would make sure 4 tables show up, then i tile them. I then save that as a layout. But then as more tables pop up, say the next 6 tables would all pop up either in the top left corner or top right corner.Then assuming i don't reposition any table, you would have maybe 11 tables on top left, 5 tables on top right, 2 tables on lower left and 2 tables on lower right.


So what i would do is after 4 tables are tiled then say layout, 5th table shows up, I would position it right over the first table on the top upper left. Then 6th table pops, i positition it top right, 7th table i position it bottom left, 8th table i position it bottom right. And yes im doing this manually. So by the time the 20th table shows up, its on the bottom right so i then click save layout and remember positioning. Isn't remember positioning suppose to solve my issue here?


So basically i tile 4 tables, but theres like 4 tables behind each table. Does that make sense? So im still tiling it but theres no overlap. So each time action comes up on a table under one of those 4 tables, then i click on it then go to next table etc.


However every time i load tables, they don't even show up correctly. Thus the first 4 tables will have 3 tables on the upper left, 4th table shows on upper right. Basically until the 10th table or so, you finally have a table on the bottom left. Does anyone know if theres a way to fix this issue and do what I want? I would figure tiling it first then arranging each table myself the first time and saving the custom layout and remember positioning checked would solve this issue but it doesn't.


I know most ppl stack tables but i prefer to do it this way. Also what would this be called? I know theres stacking, tiling, cascading but is this tiling and stacking mixed together? I would never tile lot of tables b/c its way too small for me. I think tiling 6 tables on my monitor would be the max... anymore i won't do it.


I like to know if anyone can help me with my layout on this with the tables showing up on pokerstars.

If anyone has experience with Turbo SeatIn and Placemint and would be willing to help setup, I'll pay 50$. Shouldn't take long. Thanks.

hi i usually don´t have any problem with placemint but a few days ago i start to play on carbon poker and doesn´t works very well. The program recognice the room and the size of the slots are ok but i can´t move the window to any place. The only way to change the position of the window is to change it with the window of other room

I use this expression:

Carbon\sPoker\s-\s(Bad\sBeat\s-\s)?.+?\s\(\d+\)

thanks for all

Same here. Does anybody have it for cash and is wiling to share?

Hi, anyone know if I can use only one monitor or an "specific area" for use placemint?

I have two monitors and I don't want that placemint filter full two monitor. I want a free space.

Regards, Victor

I'll assume Windows, pelegreen. You can do that. Just set the slots to the coordinates you want. Windows coordinate system treats 2 monitors like one big one, so don't waste time looking for "monitor 1, 2, etc" just open the config screen, put the tables where you want on the screen, use the details grabber to get the coordinates, and set the slot coords to those.

yes, I have Windows hehe. I don't understand you solution

I am using a script seatIN, then there is an area where script Seat IN put tables for seach recreational players.
I want that when script find a player, script move to the second monitor and my placemint put the table in an area specific and re-size.


Now, my problem is that script put windows in area detection but placemint recognize that table and change the position and re-size.

Then I need an space in my monitor where placemint not recognize nothing but however if I go out of that space placemint must recognize the table.

hey there, sorry if this is already posted itt, but was looking for a quick fold hotkey script for betsafe, anyone know if theres one out there ?

Oh, ok. I thought you meant you wanted placemint to only put tables on one screen. It sounds like you want placemint to only monitor a certain area for the tables and ignore anything else. I do not think that is possible. PM does not look at a certain area, it looks at all the windows in the stack and acts accordingly. If I think of anything, I'll post it

I find this, I try but I have some bugs

https://www.youtube.com/watch?v=hAsu0vwE8ck

Hi,

I`m looking for the regex of following sites:

1. BlackChip Poker (Winning Poker Network)
2. Full Flush Poker (Equity Poker Network)
3. Tigergaming (Chico Network)

Would be nice if someone could help me.


Thanks in advance :-)

I need help with setting up placemint for seven different sites. Would pay $$$. Add me on skype stosskugel8.

anyone figured how to configure pokerstars spin & go ? tks

I'm willing to pay some $$ for support. only one of them would be helpful too. thx

Very nice tool, works like a charm. Thanks a lot!

I haven't read the whole thread (so not sure if it has been discussed yet), but making PokerStars work is really easy. In the "Edit RegExList", I added the following expression:

Logged\sin\sas\sNickname

where "Nickname" obviously is your PS nickname. As I dont play cash, I can only assure you that this works for MTT and SNG.

Generally, I'm not sure why all these extremely difficult RegExps are used and posted here. Aren't we just looking for a string in the Windows title that's unique to the tables in question?

MMM, depends on the site and what you want to do. Some don't want the lobby placed like the tables, some have tables where the caption changes based on blind levels, there are times when other windows have similar enough titles to get caught in the filter, etc. But yeah, often a simple Regex works just fine.

hi I use this [$€£][0-9] for FTP it works but I can only use Size 818/590 tables, if I try to resize the slots, the tables start to blink all the time trying to become 818/590 again, is there a solution?

Try un-selecting "Size" under Tools --> Configure --> Settings

Anybody have a regex that works for Stars PLO cash ? I moved to a new computer anad the same regex that worked on my desktop now doesnt work, says invalid when I try to enter it into the regex list, wrong formatting : Whats wrong with this below? Thanks

\s-\s([$€]?[\d,.]+/[$€]?[\d,.]+\s)?(Ante\s[$€]?[\d.,]+\s)?(USD\s)?(Play\sMoney\s)?(-\s)?(No\s|Pot\s)?Limit\s(Hold'em|Omaha\sH/L|Omaha|Stud H/L|Stud|Razz|5-Card\sDraw|Single\sDraw\s2-7|Triple\sDraw\s2-7\sLowball|Badugi)(\s-\s(Blinds|

Use this title regex: [$€£][0-9]

It works on all game types (tournament, ring, NLHE, PLO, etc.) with real money. It works on most poker sites.

Complicated regex only makes it more likely to break when a poker site tweaks titles.

Just bumping this up... anyone?

does somebody have the problem with placemint that if you move a window fast over other windows, the windows in the background get moved around randomly? does somebody know how to fix that? thx