Open Side Menu Go to the Top
Register
[WARNING - multiple reports of bugs] Table Tamer [WARNING - multiple reports of bugs] Table Tamer

01-23-2017 , 12:59 PM
Quote:
Originally Posted by GaliZianBoy
Hi, im tying to add a new site, i use the guide but something is wrong
im able to recognize tables, make hotkeys like a= fold or b= bet, and use the lobby´s butons like 1/2 or pot

but i cant use predefined bets preflop or postflop, and i cant add hotkeys like x% of the pot
i think im having some trouble recognizing the total pot of the hand
and conversion to bb doesnt works too

maybe is because the currency is not $ or € ?

thanks and sorry for my english
If you added a site that isn't supported by TT, it is not possible that these features could work. Some custom sites can have predefined bets added, but honestly, a lot of times it just can't be easily added.

Here is a link to a guide that explains adding betting functionality to a custom site.
https://tabletamer.com/joomla/index....-site-creation

What site are you trying to add?
[WARNING - multiple reports of bugs] Table Tamer Quote
01-23-2017 , 01:01 PM
Quote:
Originally Posted by beastman
Hi, i'm getting problems with hotkeys on 888. Just basic hotkeys like fold and call.

I have 888 version 4-6.22-0-55. and followed the instructions that this means i should use the 'new client'.
I have table tamer version 1.1.5.0

I play other sites with no troubles. This started causing me problems about a week ago. I was expecting other people would have reported problems but i can't see anything.

Any ideas what could be the issue?

Thanks

There are two drop downs when you add a site, the site and the theme drop down.You have to choose New Client but you also have to choose the theme 888 (4-6.22-0-55).

Last edited by pokecancer; 01-23-2017 at 01:12 PM.
[WARNING - multiple reports of bugs] Table Tamer Quote
01-23-2017 , 01:10 PM
Quote:
Originally Posted by pewforthewin
+using alternative formulas works ok but not all the time.
It's still can randomly set x15 pots sizing or something like that.
Can't use autoclick raise because of it.

+in this version my hotkey doesn't work anymore


(if i change it to other key - everything ok)
I will look into the overbet, but I haven't had anyone else mention that. Make sure your table background is not blue, and that setup was alright. Advanced Action Checkboxes should be red and the buttons like Fold should be blue. Also, only use the betpercent of pot hotkeys because the 1/3 pot button will try to click where the 1/3 pot button is on the table. When you are facing a raise, that becomes a different button on WPN (a multiplier button which could explain the large sizing).

I dedicated the comma and period to the Send numpad to bet box option in Settings/Misc. If you shut that off, it will allow you to use comma again. I planned on making so it checks if the site is using comma as a decimal seperator though. I will do that soon.
[WARNING - multiple reports of bugs] Table Tamer Quote
01-23-2017 , 07:11 PM
Thanks for quick response as always. That solved all issues!
[WARNING - multiple reports of bugs] Table Tamer Quote
01-25-2017 , 07:50 AM
ignition update again
[WARNING - multiple reports of bugs] Table Tamer Quote
01-25-2017 , 07:04 PM
The new version is up now.
[WARNING - multiple reports of bugs] Table Tamer Quote
01-28-2017 , 08:41 AM
wpn

new version

first 2 minutes:
- openraise 33bb instead of 3bb
- 2 times overbet postflop instead of 50%
...
=> delete...
...install 1.1.5
[WARNING - multiple reports of bugs] Table Tamer Quote
01-29-2017 , 07:46 PM
pew,
Next time you play, please turn on Settings/Program/Debug before. If you encounter an overbet, you can mark it in the logs by press Ctrl + Shift + R . Then, try to send me the logs soon after, so it doesn't get overwritten.
[WARNING - multiple reports of bugs] Table Tamer Quote
01-30-2017 , 02:42 PM
I have a funny problem:

- Everytime there is an Final Table on Stars.fr OR Stars.eu the betting script stop working.
- Right click (normally -> fold) is sometimes "call" now.

THAT is really annoying.

Is is possible the reason for that is because my Final Table layout is different than my "normal" layout?

2.Question:

- Winamax isn´t working at all, i followed the instructions on tabletamer but it doesn´t work, did the anti-virus exceptions also etcetc.

Cheers
[WARNING - multiple reports of bugs] Table Tamer Quote
01-30-2017 , 09:03 PM
I updated the guides for each site. The updates should help you solve the problems you are having. Please check them out, and let me know if you need further help.
[WARNING - multiple reports of bugs] Table Tamer Quote
01-31-2017 , 10:40 PM
I just installed this, should the function to close ignition popups work by default or is there something I need to change? Seems like it gets TOURNAMENT START, but not REGISTRATION COMPLETE or SUCCESSFULLY UNREGISTERED. I haven't changed any of the popups settings.

I fixed this by changing the window type from autoregister to Other

Also is there some way to default to locked table positions in grid layout so it doesn't randomly move my tables around?
[WARNING - multiple reports of bugs] Table Tamer Quote
02-01-2017 , 12:14 AM
Normally, you would turn on Settings/Automation/Register, but your way works also.

You have to lock them manually. If you are using Fill mode, you can shut off the Rearrange option in the main window.
[WARNING - multiple reports of bugs] Table Tamer Quote
02-01-2017 , 06:04 AM
Thanks, Looked all over settings, never looked back at the main window.
[WARNING - multiple reports of bugs] Table Tamer Quote
02-01-2017 , 08:35 AM
is it possible to get tables to fill in my grid vertically rather than horizontally? i have a grid with six slots in the layout, and when new tables open they form rows rather than columns.
[WARNING - multiple reports of bugs] Table Tamer Quote
02-01-2017 , 06:45 PM
TT fills the slots based on their #, starting with 0, then 1, then 2, and so on. If you open the Layout Generator, this number is referred to as the Index. You can use the Preview option and drag the slots around, or you can use the Swap Slots option to change the index of a slot with another slot.
[WARNING - multiple reports of bugs] Table Tamer Quote
02-01-2017 , 08:08 PM
Quote:
Originally Posted by pokecancer
TT fills the slots based on their #, starting with 0, then 1, then 2, and so on. If you open the Layout Generator, this number is referred to as the Index. You can use the Preview option and drag the slots around, or you can use the Swap Slots option to change the index of a slot with another slot.
excellent, thank you!
[WARNING - multiple reports of bugs] Table Tamer Quote
02-01-2017 , 08:43 PM
I seem to have trouble getting my "custom bets" Hotkeys to work across all the sites i play on.

For example, on one site all my Custom Bets hotkeys will work, and on another, only about half of them will.

Its the same hotkeys (f1,f2,f3) that will only work on about half the sites. Does this have to do with site setup or the actual keys themselves?
[WARNING - multiple reports of bugs] Table Tamer Quote
02-02-2017 , 03:40 AM
I keep getting "there was an error saving your site settings" and "there was an error savings your settings" before "settings saved". Just installed on new machine and imported my settings.

Also everytime I start tabletamer when ipoker is open, ipoker client crashes. Any idea what could be the problem here?
[WARNING - multiple reports of bugs] Table Tamer Quote
02-02-2017 , 12:59 PM
Hi,
I have a problem with PlanetWin365. I configured PlanetWin as a custom site. When I open a table and press "start" the hole table is black and I can't see anything. Do you know this problem?
[WARNING - multiple reports of bugs] Table Tamer Quote
02-02-2017 , 08:04 PM
Quote:
Originally Posted by youngtajplayer
I seem to have trouble getting my "custom bets" Hotkeys to work across all the sites i play on.

For example, on one site all my Custom Bets hotkeys will work, and on another, only about half of them will.

Its the same hotkeys (f1,f2,f3) that will only work on about half the sites. Does this have to do with site setup or the actual keys themselves?
What site are you having the problems on? There are guides for setting up most sites. It could be a site setup issue.

https://tabletamer.com/joomla/index.php/intro

When you say custom bet hotkeys, you are referring to Bet % of Pot hotkeys? It sounds like you are on an older version of TT. Updating could fix a site's hotkeys if the site has had an update recently.

Last edited by pokecancer; 02-02-2017 at 08:12 PM.
[WARNING - multiple reports of bugs] Table Tamer Quote
02-02-2017 , 08:07 PM
Quote:
Originally Posted by NoMeansYes_
I keep getting "there was an error saving your site settings" and "there was an error savings your settings" before "settings saved". Just installed on new machine and imported my settings.

Also everytime I start tabletamer when ipoker is open, ipoker client crashes. Any idea what could be the problem here?
It sounds like something is preventing TT from writing to your hard drive. I would try adding exclusions to your antivirus for TT and restart TT.

What skin of Ipoker? Are you running the client as admin? Did you install the latest version of TT?
[WARNING - multiple reports of bugs] Table Tamer Quote
02-02-2017 , 08:08 PM
Quote:
Originally Posted by majeca
Hi,
I have a problem with PlanetWin365. I configured PlanetWin as a custom site. When I open a table and press "start" the hole table is black and I can't see anything. Do you know this problem?
I think I remember something similar. I don't think the tables can be resized without this happening to them. In Settings/Layout, you can turn on Don't Resize Tables.
[WARNING - multiple reports of bugs] Table Tamer Quote
02-02-2017 , 09:23 PM
AA fold doesn't work preflop on Betfair (iPoker). When i press fold hotkey preflop, it doesn't check the fold checkbox on Betfair client. Could you fix this please?

Last edited by oijmaz; 02-02-2017 at 09:32 PM.
[WARNING - multiple reports of bugs] Table Tamer Quote
02-03-2017 , 05:00 AM
Quote:
Originally Posted by pokecancer
It sounds like something is preventing TT from writing to your hard drive. I would try adding exclusions to your antivirus for TT and restart TT.

What skin of Ipoker? Are you running the client as admin? Did you install the latest version of TT?
I reinstalled and redone my settings and its working fine now. I think my setting file that I exported was bugged.
[WARNING - multiple reports of bugs] Table Tamer Quote
02-03-2017 , 12:52 PM
Quote:
Originally Posted by oijmaz
AA fold doesn't work preflop on Betfair (iPoker). When i press fold hotkey preflop, it doesn't check the fold checkbox on Betfair client. Could you fix this please?
Make sure you have Settings/Action and Focus/Advanced Action hotkeys on, and you are running the client as admin. If there is a language setting in the client, make sure it is set to english. I can't test today. Let me know if you get it fixed, and I will check tomorrow if you didn't.
[WARNING - multiple reports of bugs] Table Tamer Quote

      
m