Open Side Menu Go to the Top
Register
Tilt Breaker Tilt Breaker

08-11-2012 , 03:28 PM
Quote:
Originally Posted by 2opo
When my tiltbreaker switches and for example 1 table is left (I have 5 min before closing all tables automatically). I have like 40sec left and a very strong hand. But in 40sec this table closes, I lose a pot with the nuts and become more tilty.

How to solve this "problem" (I don't want to increase a time before closing my tables 5min )

ty
Hi 2opo,

Is your TB checking "Sit Out Next Hand" or "Sit Out Next Big Blind" on all of your tables? If it is, I'm assuming you are sitting back in?

There is no current solution for you problem, outside of keeping yourself sat out when the Delay Timer comes up. I think we will add a + 1min button to the Delay Timer though, which should suffice for the rare occasions when you need more time to finish a hand. We'll set the button so that it can only be used once per lockdown.

Thoughts?

Quote:
Originally Posted by 2opo
Also I think my tilbreak rules is not optimal. I didn't try Optimus tool yet. Now I can't. I have 3 hrs break after loosing 900 bb.

Could anyone plz share their rules?
If you send me your Optimus reports I can help you with this. The easiest way to do this is to run all 3 reports, then send me your log files through the Feedback form; just make sure to check the "include log files" checkbox.

Thanks,
S!K
Tilt Breaker Quote
08-12-2012 , 04:19 AM
Probably a stupid question but does Optimus works with pt3?
Tilt Breaker Quote
08-12-2012 , 05:27 AM
Quote:
Originally Posted by orb_dam_u
Probably a stupid question but does Optimus works with pt3?
After some searching I found out that Optimus needs HM :-(
Tilt Breaker Quote
08-12-2012 , 06:23 AM
hey,

i would to know if its possible(if so how?) if I can block the HM stats from being viewed during the session. I don´t want to know if I´m up or down. The Hud should work but I don´t like to know if I had lost or not during the session.
Tilt Breaker Quote
08-12-2012 , 02:56 PM
i d like to ask few questions how it works and possibly buy it if it does what i want.

do you have skype?
Tilt Breaker Quote
08-12-2012 , 11:43 PM
Quote:
Originally Posted by orb_dam_u
Probably a stupid question but does Optimus works with pt3?
Quote:
Originally Posted by orb_dam_u
After some searching I found out that Optimus needs HM :-(
Yea, sorry; Optimus does not support PT3. We will probably support PT4 at some point though.

Quote:
Originally Posted by crossilius
hey,

i would to know if its possible(if so how?) if I can block the HM stats from being viewed during the session. I don´t want to know if I´m up or down. The Hud should work but I don´t like to know if I had lost or not during the session.
Which version of HM are you using? HM2's HUD is allowed through the App Blocker by default. For HM1 you need to approve the HUD..exe to allow the HUD to stay above the App Blocker screen.

As long as the main HM exe isn't approved it will be blocked.

Quote:
Originally Posted by msim
i d like to ask few questions how it works and possibly buy it if it does what i want.

do you have skype?
Sure. I'll send you a PM

S!K
Tilt Breaker Quote
08-16-2012 , 03:32 PM
I just wanted to ask a few questions, please give your skype.
Tilt Breaker Quote
08-16-2012 , 03:35 PM
Quote:
Originally Posted by DONTPANICdz
I just wanted to ask a few questions, please give your skype.
PM sent.

------------------------------------------------------

All,

We'll have a fix for the Stars filter position change and SONH/SONBB some time next week as well as fixes for a few other things.

Thanks,
S!K
Tilt Breaker Quote
08-22-2012 , 12:44 PM
'idle time from last hand played til app blocker disappears' isnt working for me anymore
Tilt Breaker Quote
08-22-2012 , 01:33 PM
Quote:
Originally Posted by justDgmt
'idle time from last hand played til app blocker disappears' isnt working for me anymore
Hi JustDgmt,

Please send me your logs through the Feedback form. In the message can you elaborate if this is a one time thing or if it has happened a few times. Also, how do you end up disabling the screen if it doesn't turn off automatically?

Thanks,
S!K
Tilt Breaker Quote
08-23-2012 , 08:03 AM
happens everytime, v1.579.1

to disable: i close poker client and then terminate all tiltbreaker processes or just reboot

i will send logs today
Tilt Breaker Quote
08-26-2012 , 06:15 AM
Hi i currently have this program and use it for pokerstars, but will this work for Revolution/CAke network majority of my play is on there and wont work atm and still do some stupid tilt sessions
Tilt Breaker Quote
08-27-2012 , 10:37 AM
Quote:
Originally Posted by blaq01
Hi i currently have this program and use it for pokerstars, but will this work for Revolution/CAke network majority of my play is on there and wont work atm and still do some stupid tilt sessions
Hi Blaq,

I don't have any definitive plans for Revolution/Cake; the US market is very volatile right now, and investing in a new site seems foolish.

I will definitely add US supported sites when the picture becomes a bit clearer.

Thanks,
S!K
Tilt Breaker Quote
09-02-2012 , 01:39 AM
There is a fix for the new Poker Site Filters positioning on Stars available now on the website fyi.

Should be pushing out an auto-update soon with finalized Party support.

Good luck at the tables in the mean time,
S!K
Tilt Breaker Quote
09-02-2012 , 02:38 AM
any estimated release date for the final party update? will this include skin support (gamebookers)? because atm tiltbreaker is only working on microcent tables for me with gamebookers.
Tilt Breaker Quote
09-03-2012 , 12:22 AM
Quote:
Originally Posted by wodka
any estimated release date for the final party update? will this include skin support (gamebookers)? because atm tiltbreaker is only working on microcent tables for me with gamebookers.
Hi Wodka,

Shoot me a PM with your email and I'll send you our latest version. If micro stakes are being parsed then all stakes should be being parsed.

thanks,
S!K
Tilt Breaker Quote
09-05-2012 , 09:00 AM
is there some way to get Tilt Breaker for free??? Playing number of raked hands or something like that???
Tilt Breaker Quote
09-05-2012 , 05:15 PM
Quote:
Originally Posted by janiss1
is there some way to get Tilt Breaker for free??? Playing number of raked hands or something like that???
You can get Tilt Breaker for free by raking just $300 at any of the rooms listed here: vip.tiltbreaker.com

S!K
Tilt Breaker Quote
09-10-2012 , 05:42 AM
hi

just DL the trial looks like a good program

just have a question regarding the optimus

when looking at the reports as times played / loss/win # of hands in session the bb/100 i guess is ev bb/100 or else i dont see the point in it

thanks

edit: one more thing in my report i have + winrate of hands on all of the chart (brag) but then on performance by times played i do have a - bb/100 how can this be?

Last edited by uppOner; 09-10-2012 at 05:45 AM. Reason: new toughts
Tilt Breaker Quote
09-10-2012 , 02:41 PM
Just testing this at the moment, when I play zoom it lags a bit.
Tilt Breaker Quote
09-10-2012 , 03:06 PM
Quote:
Originally Posted by uppOner
hi

just DL the trial looks like a good program

just have a question regarding the optimus

when looking at the reports as times played / loss/win # of hands in session the bb/100 i guess is ev bb/100 or else i dont see the point in it

thanks

edit: one more thing in my report i have + winrate of hands on all of the chart (brag) but then on performance by times played i do have a - bb/100 how can this be?

Hi UppOner,

Why does optimus need to be by ev in order to be relevant?

To answer your question about the difference in hands/time played reports. I would assume there are instances when you play more tables (or less tables) than usual, but log the same amount of hours. Therefore # hands per session can vary widely for an x hour session.

Anyway, the main point of Optimus is to show your winrate after a common threshold is reached in your sessions. For example, what is your winrate for all hands played after you have already played 1000 hands.

Do you see how this (theoretically) should help you to identify where fatigue or tilt might set in? Based on your data, it seems that after you play for x time your cognitive abilities may start declining and you should therefore schedule a break for that time.

Make sense?

Let me know if you have any more questions,

S!K
Tilt Breaker Quote
09-10-2012 , 03:07 PM
Quote:
Originally Posted by UnitedAs1
Just testing this at the moment, when I play zoom it lags a bit.
Hi United,

Can you go to the Feedback form and send me your log files please, just make sure to check the "include log files" box.

I have a newer build I can send you as well that should further optimize hand parsing.

Thanks,
S!K
Tilt Breaker Quote
09-15-2012 , 08:43 AM
I have been wondering about something.

Often time when I hit my loss break rule and counter to shut down starts I often manage to win some back but still get kicked out.

Is there way to tell software stop counting when won some back and bellow the break rule?
Tilt Breaker Quote
09-16-2012 , 12:27 AM
Quote:
Originally Posted by LWallet
I have been wondering about something.

Often time when I hit my loss break rule and counter to shut down starts I often manage to win some back but still get kicked out.

Is there way to tell software stop counting when won some back and bellow the break rule?
Hi LWallet,

We can definitely do this, but I have two concerns:

1) Wouldn't this incentivize you to play more aggressive to try to beat your Stop Loss; i.e. forcing hands that you ordinarily wouldn't? Seems like this would end up negative EV to me, but I'm open to counter arguments.

2) How would we make this work from a design perspective? There could easily be times where the Delay timer and rule notification window are popping up, closing, up, closing, etc. as you win/lose a few pots right at your Stop Loss.

Curious to hear your thoughts,
S!K
Tilt Breaker Quote
09-16-2012 , 09:58 PM
Quote:
Originally Posted by suic!deking
Hi LWallet,

We can definitely do this, but I have two concerns:

1) Wouldn't this incentivize you to play more aggressive to try to beat your Stop Loss; i.e. forcing hands that you ordinarily wouldn't? Seems like this would end up negative EV to me, but I'm open to counter arguments.

2) How would we make this work from a design perspective? There could easily be times where the Delay timer and rule notification window are popping up, closing, up, closing, etc. as you win/lose a few pots right at your Stop Loss.

Curious to hear your thoughts,
S!K
Thanks for you reply,

First of all let me say that I love the program and it really saved me some money.

1) I think the people who go crazy now when the timer starts ticking those last 10 or whatever minutes and they will get kicked, already do it. I know I did it in the beginning.

2) From a design perspective maybe in a GUI having a checkbox to enable this functionality and a dropdown or text box to specify amount of % needed to be won back based on stop loss rule to make timer stop ticking. That way it will be optional for people. That way people can control if they want to even use it, and if yes how it should work for them, and it will not be popping up every few seconds.

For example in my case, I have stop loss of 3BI and many times when I hit it I manage win back 25%+ of loses in those 10 minutes and feel that I am playing good but run bad, and would like to continue but obviously have to take break.

Last edited by LWallet; 09-16-2012 at 10:09 PM. Reason: grammar
Tilt Breaker Quote

      
m