[UTILITY] TableNinja - Hotkeys and Utilities for PokerStars
02-08-2014
, 10:30 AM
2) This is available, once a table is closed you can click on the layout hotkey and it will rearrange it or you can click reapply layout.
3) We are working on this and hope to have it resolved soon.
Why do you want this disabled?
02-08-2014
, 11:47 PM
So I can save little space on monitor and I don't want to see buyin.
About that layout setting don't work to me, I did have identically with you and tryed again today but still it don't work. Why there is no option to manually add numbers where table should open? Even should be option to manually change numbers.
layout presetting before closing:
layout after opening again:
monitor settings:
log errors:
Also would be awesome to have option to save filters on stars lobby, on tn1 did was possible to do with sng sensei, where could save settings and then press "test" button and it did change filters what did have before saved. Would like to see this if this is not possible in next stars software. (actually this might be possible with sngsensei right now, have to test it)
02-10-2014
, 03:34 PM
02-10-2014
, 03:48 PM
02-11-2014
, 12:45 AM
Ok, so I spent a good amount of time watching the videos and messing with setups. I'm hopeful that with table ninja 2 I can stack tournaments on multiple sites and use the abundance of set aside keys to pull tables from my stack as they get to later stages.
I don't prefer the ninja-tile b/c tables moving on their own is hard for me to follow and leads to more eye fatigue. That said it's a cool feature and I'm glad it was included.
Overall I'm pretty impressed with the program. The layout options are very cool. There are a few problems I'm running into and then I have a few suggestions also.
Problems:
1) The little system Tray Icon is half red and half green, meaning that only global hotkeys are working. Not sure why this would be. Tried turning hotkeys off and on again. That said, my hotkeys (mainly left middle and right button and then all-in+bet) all seem to be working even though they are not global hotkeys.
2) The little displays work for the TNJ stuff like table number and number in line ect ect but they don't show up for Tourney BB or Tourney MM or any of the stack size ones
3) When I stack, the 'cycle to next in line key works properly as it did in table ninja 1. I'm having problems when I try to go back to whatever table I have just acted on. I was never able to do this in TNJ 1, I had hoped that the distinction of "cycle fwd/bkwd" vs "cycle next-in-line/prev-in-line" would fix this. I set my left trigger (xbox controller) to cycle previous in line but it still isn't consistently taking me to the table I just acted on. Most of the time it will do nothing, although it occasionally works. I set this as a global hotkey to match cycle to first in line.
4) iPoker doesn't seem to always pop to top of the stack. I'll hear the beep that I have ipoker action or am timing out but unless I hit cycle to first in line it doesn't always pop up, or it pops up when i've already timed down to about 6 seconds. Worth noting, I was stacking iPoker w/ FTP and PokerStars. PS and FTP stack fine together, and iPoker actually seems to stack fine if it is in a stack with only other ipoker games. For now I'm using a set table aside slot to place all my ipoker games into their own slot.
5) I know both iPoker and 888 are in beta, but I'm not sure what it means that it recognizes 888 tables? Aside for the issues mentioned above w/ stacking. iPoker works. 888 doesn't get included in the layout or the table cycle, so I can't see how TNJ 2 is recognizing it at all. I actually have 888.com software and not Pacific Poker, idk if that matters. My ghetto work-around is to make the hotkeys in TNJ 2 for left middle and right button the default shortcuts in 888 (F5 F6 and F7.) Then it makes the commands the same for everything. I experimented running 888 and just manually putting them in their own stack and the only issue was since TNJ 2 doesn't pick it up I have to click on the table to make it active (I can't mouse over) then my hotkey will work, but the hotkeys are working through the 888 shortcuts and my keystroke (F5, F6, F7) so nothing to do with TNJ 2 atm. The only issue with my work-around is that F5 (my universal fold button since it's the default on 888 and I can't change it) toggles Auto-Muck on and off in iPoker, and as per TNJ 2 instructions Auto-Muck should be on.
Fwiw I'm using xpadder to assign these keys to my joystick. Not sure if using xpadder and TNJ2 at the same time causes any issues. I always used xpadder with TNJ 1. I use the default joystick buttons (unmapped in xpadder) most of the time. I know xpadder isn't needed to use TNJ with a game pad. I use xpadder b/c for sites like 888 and Winemax.fr that TNJ doesn't do hotkeys for, I can manually set whatever keystroke combination those sites do allow as a shortcut to my game pad on the same button I use in TBJ 2 for that action on the sites which are supported.
Suggestions
1) Manual pixel dimension entry for slots (both table set aside and layout design.) Maybe I'm just missing it b/c I think TNJ 1 had this.
2) It would be nice to be able to have table set aside keys to correspond to each layout. The shape of my layout is going to determine what spots I'll want to be snapping table to. I may want one layout with a big stack and the ability to snap tables to a few spots around it. Then I may want another layout that is 3x3 (9 tiled) with a stack in the middle and the ability to snap tables all around it. It's awesome that you can seemingly make infinite custom layout, but that functionality is limited by the set table aside hotkeys being static across all layouts. Also, I believe you could save and import configs in TNJ 1, but with TNJ 2 it only offers a backup, so I can't manually make 2 sets of settings to swap between either.
3) It would be cool if customs layouts could have placement options by software. When tiling it would be nice to cluster the different software. For my purposes, if I could have multiple stacks and have the new tables pop to their software's stack; that would save me a click.
4) I know iPoker and 888 support are in beta but winamax.fr support would also be great
5) Save current hand history to folder hotkey? Or better yet, mark in HEM
Will probably think of some more stuff later but this is where I'm at for now. Haven't even gotten a chance to play with the default betting. I'm really glad to see by position being built into there. Would like to see filters based on your stack size in BB/M rather than just the size of the BB or the size of the ante.
Thanks for the help and lmk if you want me to send any log files or w/e.
I don't prefer the ninja-tile b/c tables moving on their own is hard for me to follow and leads to more eye fatigue. That said it's a cool feature and I'm glad it was included.
Overall I'm pretty impressed with the program. The layout options are very cool. There are a few problems I'm running into and then I have a few suggestions also.
Problems:
1) The little system Tray Icon is half red and half green, meaning that only global hotkeys are working. Not sure why this would be. Tried turning hotkeys off and on again. That said, my hotkeys (mainly left middle and right button and then all-in+bet) all seem to be working even though they are not global hotkeys.
2) The little displays work for the TNJ stuff like table number and number in line ect ect but they don't show up for Tourney BB or Tourney MM or any of the stack size ones
3) When I stack, the 'cycle to next in line key works properly as it did in table ninja 1. I'm having problems when I try to go back to whatever table I have just acted on. I was never able to do this in TNJ 1, I had hoped that the distinction of "cycle fwd/bkwd" vs "cycle next-in-line/prev-in-line" would fix this. I set my left trigger (xbox controller) to cycle previous in line but it still isn't consistently taking me to the table I just acted on. Most of the time it will do nothing, although it occasionally works. I set this as a global hotkey to match cycle to first in line.
4) iPoker doesn't seem to always pop to top of the stack. I'll hear the beep that I have ipoker action or am timing out but unless I hit cycle to first in line it doesn't always pop up, or it pops up when i've already timed down to about 6 seconds. Worth noting, I was stacking iPoker w/ FTP and PokerStars. PS and FTP stack fine together, and iPoker actually seems to stack fine if it is in a stack with only other ipoker games. For now I'm using a set table aside slot to place all my ipoker games into their own slot.
5) I know both iPoker and 888 are in beta, but I'm not sure what it means that it recognizes 888 tables? Aside for the issues mentioned above w/ stacking. iPoker works. 888 doesn't get included in the layout or the table cycle, so I can't see how TNJ 2 is recognizing it at all. I actually have 888.com software and not Pacific Poker, idk if that matters. My ghetto work-around is to make the hotkeys in TNJ 2 for left middle and right button the default shortcuts in 888 (F5 F6 and F7.) Then it makes the commands the same for everything. I experimented running 888 and just manually putting them in their own stack and the only issue was since TNJ 2 doesn't pick it up I have to click on the table to make it active (I can't mouse over) then my hotkey will work, but the hotkeys are working through the 888 shortcuts and my keystroke (F5, F6, F7) so nothing to do with TNJ 2 atm. The only issue with my work-around is that F5 (my universal fold button since it's the default on 888 and I can't change it) toggles Auto-Muck on and off in iPoker, and as per TNJ 2 instructions Auto-Muck should be on.
Fwiw I'm using xpadder to assign these keys to my joystick. Not sure if using xpadder and TNJ2 at the same time causes any issues. I always used xpadder with TNJ 1. I use the default joystick buttons (unmapped in xpadder) most of the time. I know xpadder isn't needed to use TNJ with a game pad. I use xpadder b/c for sites like 888 and Winemax.fr that TNJ doesn't do hotkeys for, I can manually set whatever keystroke combination those sites do allow as a shortcut to my game pad on the same button I use in TBJ 2 for that action on the sites which are supported.
Suggestions
1) Manual pixel dimension entry for slots (both table set aside and layout design.) Maybe I'm just missing it b/c I think TNJ 1 had this.
2) It would be nice to be able to have table set aside keys to correspond to each layout. The shape of my layout is going to determine what spots I'll want to be snapping table to. I may want one layout with a big stack and the ability to snap tables to a few spots around it. Then I may want another layout that is 3x3 (9 tiled) with a stack in the middle and the ability to snap tables all around it. It's awesome that you can seemingly make infinite custom layout, but that functionality is limited by the set table aside hotkeys being static across all layouts. Also, I believe you could save and import configs in TNJ 1, but with TNJ 2 it only offers a backup, so I can't manually make 2 sets of settings to swap between either.
3) It would be cool if customs layouts could have placement options by software. When tiling it would be nice to cluster the different software. For my purposes, if I could have multiple stacks and have the new tables pop to their software's stack; that would save me a click.
4) I know iPoker and 888 support are in beta but winamax.fr support would also be great
5) Save current hand history to folder hotkey? Or better yet, mark in HEM
Will probably think of some more stuff later but this is where I'm at for now. Haven't even gotten a chance to play with the default betting. I'm really glad to see by position being built into there. Would like to see filters based on your stack size in BB/M rather than just the size of the BB or the size of the ante.
Thanks for the help and lmk if you want me to send any log files or w/e.
02-11-2014
, 09:21 AM
Quote:
Ok, so I spent a good amount of time watching the videos and messing with setups. I'm hopeful that with table ninja 2 I can stack tournaments on multiple sites and use the abundance of set aside keys to pull tables from my stack as they get to later stages.
I don't prefer the ninja-tile b/c tables moving on their own is hard for me to follow and leads to more eye fatigue. That said it's a cool feature and I'm glad it was included.
Overall I'm pretty impressed with the program. The layout options are very cool. There are a few problems I'm running into and then I have a few suggestions also.
Problems:
1) The little system Tray Icon is half red and half green, meaning that only global hotkeys are working. Not sure why this would be. Tried turning hotkeys off and on again. That said, my hotkeys (mainly left middle and right button and then all-in+bet) all seem to be working even though they are not global hotkeys.
2) The little displays work for the TNJ stuff like table number and number in line ect ect but they don't show up for Tourney BB or Tourney MM or any of the stack size ones
3) When I stack, the 'cycle to next in line key works properly as it did in table ninja 1. I'm having problems when I try to go back to whatever table I have just acted on. I was never able to do this in TNJ 1, I had hoped that the distinction of "cycle fwd/bkwd" vs "cycle next-in-line/prev-in-line" would fix this. I set my left trigger (xbox controller) to cycle previous in line but it still isn't consistently taking me to the table I just acted on. Most of the time it will do nothing, although it occasionally works. I set this as a global hotkey to match cycle to first in line.
4) iPoker doesn't seem to always pop to top of the stack. I'll hear the beep that I have ipoker action or am timing out but unless I hit cycle to first in line it doesn't always pop up, or it pops up when i've already timed down to about 6 seconds. Worth noting, I was stacking iPoker w/ FTP and PokerStars. PS and FTP stack fine together, and iPoker actually seems to stack fine if it is in a stack with only other ipoker games. For now I'm using a set table aside slot to place all my ipoker games into their own slot.
5) I know both iPoker and 888 are in beta, but I'm not sure what it means that it recognizes 888 tables? Aside for the issues mentioned above w/ stacking. iPoker works. 888 doesn't get included in the layout or the table cycle, so I can't see how TNJ 2 is recognizing it at all. I actually have 888.com software and not Pacific Poker, idk if that matters. My ghetto work-around is to make the hotkeys in TNJ 2 for left middle and right button the default shortcuts in 888 (F5 F6 and F7.) Then it makes the commands the same for everything. I experimented running 888 and just manually putting them in their own stack and the only issue was since TNJ 2 doesn't pick it up I have to click on the table to make it active (I can't mouse over) then my hotkey will work, but the hotkeys are working through the 888 shortcuts and my keystroke (F5, F6, F7) so nothing to do with TNJ 2 atm. The only issue with my work-around is that F5 (my universal fold button since it's the default on 888 and I can't change it) toggles Auto-Muck on and off in iPoker, and as per TNJ 2 instructions Auto-Muck should be on.
Fwiw I'm using xpadder to assign these keys to my joystick. Not sure if using xpadder and TNJ2 at the same time causes any issues. I always used xpadder with TNJ 1. I use the default joystick buttons (unmapped in xpadder) most of the time. I know xpadder isn't needed to use TNJ with a game pad. I use xpadder b/c for sites like 888 and Winemax.fr that TNJ doesn't do hotkeys for, I can manually set whatever keystroke combination those sites do allow as a shortcut to my game pad on the same button I use in TBJ 2 for that action on the sites which are supported.
Suggestions
1) Manual pixel dimension entry for slots (both table set aside and layout design.) Maybe I'm just missing it b/c I think TNJ 1 had this.
2) It would be nice to be able to have table set aside keys to correspond to each layout. The shape of my layout is going to determine what spots I'll want to be snapping table to. I may want one layout with a big stack and the ability to snap tables to a few spots around it. Then I may want another layout that is 3x3 (9 tiled) with a stack in the middle and the ability to snap tables all around it. It's awesome that you can seemingly make infinite custom layout, but that functionality is limited by the set table aside hotkeys being static across all layouts. Also, I believe you could save and import configs in TNJ 1, but with TNJ 2 it only offers a backup, so I can't manually make 2 sets of settings to swap between either.
3) It would be cool if customs layouts could have placement options by software. When tiling it would be nice to cluster the different software. For my purposes, if I could have multiple stacks and have the new tables pop to their software's stack; that would save me a click.
4) I know iPoker and 888 support are in beta but winamax.fr support would also be great
5) Save current hand history to folder hotkey? Or better yet, mark in HEM
Will probably think of some more stuff later but this is where I'm at for now. Haven't even gotten a chance to play with the default betting. I'm really glad to see by position being built into there. Would like to see filters based on your stack size in BB/M rather than just the size of the BB or the size of the ante.
Thanks for the help and lmk if you want me to send any log files or w/e.
I don't prefer the ninja-tile b/c tables moving on their own is hard for me to follow and leads to more eye fatigue. That said it's a cool feature and I'm glad it was included.
Overall I'm pretty impressed with the program. The layout options are very cool. There are a few problems I'm running into and then I have a few suggestions also.
Problems:
1) The little system Tray Icon is half red and half green, meaning that only global hotkeys are working. Not sure why this would be. Tried turning hotkeys off and on again. That said, my hotkeys (mainly left middle and right button and then all-in+bet) all seem to be working even though they are not global hotkeys.
2) The little displays work for the TNJ stuff like table number and number in line ect ect but they don't show up for Tourney BB or Tourney MM or any of the stack size ones
3) When I stack, the 'cycle to next in line key works properly as it did in table ninja 1. I'm having problems when I try to go back to whatever table I have just acted on. I was never able to do this in TNJ 1, I had hoped that the distinction of "cycle fwd/bkwd" vs "cycle next-in-line/prev-in-line" would fix this. I set my left trigger (xbox controller) to cycle previous in line but it still isn't consistently taking me to the table I just acted on. Most of the time it will do nothing, although it occasionally works. I set this as a global hotkey to match cycle to first in line.
4) iPoker doesn't seem to always pop to top of the stack. I'll hear the beep that I have ipoker action or am timing out but unless I hit cycle to first in line it doesn't always pop up, or it pops up when i've already timed down to about 6 seconds. Worth noting, I was stacking iPoker w/ FTP and PokerStars. PS and FTP stack fine together, and iPoker actually seems to stack fine if it is in a stack with only other ipoker games. For now I'm using a set table aside slot to place all my ipoker games into their own slot.
5) I know both iPoker and 888 are in beta, but I'm not sure what it means that it recognizes 888 tables? Aside for the issues mentioned above w/ stacking. iPoker works. 888 doesn't get included in the layout or the table cycle, so I can't see how TNJ 2 is recognizing it at all. I actually have 888.com software and not Pacific Poker, idk if that matters. My ghetto work-around is to make the hotkeys in TNJ 2 for left middle and right button the default shortcuts in 888 (F5 F6 and F7.) Then it makes the commands the same for everything. I experimented running 888 and just manually putting them in their own stack and the only issue was since TNJ 2 doesn't pick it up I have to click on the table to make it active (I can't mouse over) then my hotkey will work, but the hotkeys are working through the 888 shortcuts and my keystroke (F5, F6, F7) so nothing to do with TNJ 2 atm. The only issue with my work-around is that F5 (my universal fold button since it's the default on 888 and I can't change it) toggles Auto-Muck on and off in iPoker, and as per TNJ 2 instructions Auto-Muck should be on.
Fwiw I'm using xpadder to assign these keys to my joystick. Not sure if using xpadder and TNJ2 at the same time causes any issues. I always used xpadder with TNJ 1. I use the default joystick buttons (unmapped in xpadder) most of the time. I know xpadder isn't needed to use TNJ with a game pad. I use xpadder b/c for sites like 888 and Winemax.fr that TNJ doesn't do hotkeys for, I can manually set whatever keystroke combination those sites do allow as a shortcut to my game pad on the same button I use in TBJ 2 for that action on the sites which are supported.
Suggestions
1) Manual pixel dimension entry for slots (both table set aside and layout design.) Maybe I'm just missing it b/c I think TNJ 1 had this.
2) It would be nice to be able to have table set aside keys to correspond to each layout. The shape of my layout is going to determine what spots I'll want to be snapping table to. I may want one layout with a big stack and the ability to snap tables to a few spots around it. Then I may want another layout that is 3x3 (9 tiled) with a stack in the middle and the ability to snap tables all around it. It's awesome that you can seemingly make infinite custom layout, but that functionality is limited by the set table aside hotkeys being static across all layouts. Also, I believe you could save and import configs in TNJ 1, but with TNJ 2 it only offers a backup, so I can't manually make 2 sets of settings to swap between either.
3) It would be cool if customs layouts could have placement options by software. When tiling it would be nice to cluster the different software. For my purposes, if I could have multiple stacks and have the new tables pop to their software's stack; that would save me a click.
4) I know iPoker and 888 support are in beta but winamax.fr support would also be great
5) Save current hand history to folder hotkey? Or better yet, mark in HEM
Will probably think of some more stuff later but this is where I'm at for now. Haven't even gotten a chance to play with the default betting. I'm really glad to see by position being built into there. Would like to see filters based on your stack size in BB/M rather than just the size of the BB or the size of the ante.
Thanks for the help and lmk if you want me to send any log files or w/e.
Hi,
The lead developer will be along shortly to answer your questions.
02-12-2014
, 07:23 PM
Quote:
Ok, so I spent a good amount of time watching the videos and messing with setups. I'm hopeful that with table ninja 2 I can stack tournaments on multiple sites and use the abundance of set aside keys to pull tables from my stack as they get to later stages.
I don't prefer the ninja-tile b/c tables moving on their own is hard for me to follow and leads to more eye fatigue. That said it's a cool feature and I'm glad it was included.
Overall I'm pretty impressed with the program. The layout options are very cool. There are a few problems I'm running into and then I have a few suggestions also.
Problems:
1) The little system Tray Icon is half red and half green, meaning that only global hotkeys are working. Not sure why this would be. Tried turning hotkeys off and on again. That said, my hotkeys (mainly left middle and right button and then all-in+bet) all seem to be working even though they are not global hotkeys.
2) The little displays work for the TNJ stuff like table number and number in line ect ect but they don't show up for Tourney BB or Tourney MM or any of the stack size ones
3) When I stack, the 'cycle to next in line key works properly as it did in table ninja 1. I'm having problems when I try to go back to whatever table I have just acted on. I was never able to do this in TNJ 1, I had hoped that the distinction of "cycle fwd/bkwd" vs "cycle next-in-line/prev-in-line" would fix this. I set my left trigger (xbox controller) to cycle previous in line but it still isn't consistently taking me to the table I just acted on. Most of the time it will do nothing, although it occasionally works. I set this as a global hotkey to match cycle to first in line.
4) iPoker doesn't seem to always pop to top of the stack. I'll hear the beep that I have ipoker action or am timing out but unless I hit cycle to first in line it doesn't always pop up, or it pops up when i've already timed down to about 6 seconds. Worth noting, I was stacking iPoker w/ FTP and PokerStars. PS and FTP stack fine together, and iPoker actually seems to stack fine if it is in a stack with only other ipoker games. For now I'm using a set table aside slot to place all my ipoker games into their own slot.
5) I know both iPoker and 888 are in beta, but I'm not sure what it means that it recognizes 888 tables? Aside for the issues mentioned above w/ stacking. iPoker works. 888 doesn't get included in the layout or the table cycle, so I can't see how TNJ 2 is recognizing it at all. I actually have 888.com software and not Pacific Poker, idk if that matters. My ghetto work-around is to make the hotkeys in TNJ 2 for left middle and right button the default shortcuts in 888 (F5 F6 and F7.) Then it makes the commands the same for everything. I experimented running 888 and just manually putting them in their own stack and the only issue was since TNJ 2 doesn't pick it up I have to click on the table to make it active (I can't mouse over) then my hotkey will work, but the hotkeys are working through the 888 shortcuts and my keystroke (F5, F6, F7) so nothing to do with TNJ 2 atm. The only issue with my work-around is that F5 (my universal fold button since it's the default on 888 and I can't change it) toggles Auto-Muck on and off in iPoker, and as per TNJ 2 instructions Auto-Muck should be on.
Fwiw I'm using xpadder to assign these keys to my joystick. Not sure if using xpadder and TNJ2 at the same time causes any issues. I always used xpadder with TNJ 1. I use the default joystick buttons (unmapped in xpadder) most of the time. I know xpadder isn't needed to use TNJ with a game pad. I use xpadder b/c for sites like 888 and Winemax.fr that TNJ doesn't do hotkeys for, I can manually set whatever keystroke combination those sites do allow as a shortcut to my game pad on the same button I use in TBJ 2 for that action on the sites which are supported.
Suggestions
1) Manual pixel dimension entry for slots (both table set aside and layout design.) Maybe I'm just missing it b/c I think TNJ 1 had this.
2) It would be nice to be able to have table set aside keys to correspond to each layout. The shape of my layout is going to determine what spots I'll want to be snapping table to. I may want one layout with a big stack and the ability to snap tables to a few spots around it. Then I may want another layout that is 3x3 (9 tiled) with a stack in the middle and the ability to snap tables all around it. It's awesome that you can seemingly make infinite custom layout, but that functionality is limited by the set table aside hotkeys being static across all layouts. Also, I believe you could save and import configs in TNJ 1, but with TNJ 2 it only offers a backup, so I can't manually make 2 sets of settings to swap between either.
3) It would be cool if customs layouts could have placement options by software. When tiling it would be nice to cluster the different software. For my purposes, if I could have multiple stacks and have the new tables pop to their software's stack; that would save me a click.
4) I know iPoker and 888 support are in beta but winamax.fr support would also be great
5) Save current hand history to folder hotkey? Or better yet, mark in HEM
Will probably think of some more stuff later but this is where I'm at for now. Haven't even gotten a chance to play with the default betting. I'm really glad to see by position being built into there. Would like to see filters based on your stack size in BB/M rather than just the size of the BB or the size of the ante.
Thanks for the help and lmk if you want me to send any log files or w/e.
I don't prefer the ninja-tile b/c tables moving on their own is hard for me to follow and leads to more eye fatigue. That said it's a cool feature and I'm glad it was included.
Overall I'm pretty impressed with the program. The layout options are very cool. There are a few problems I'm running into and then I have a few suggestions also.
Problems:
1) The little system Tray Icon is half red and half green, meaning that only global hotkeys are working. Not sure why this would be. Tried turning hotkeys off and on again. That said, my hotkeys (mainly left middle and right button and then all-in+bet) all seem to be working even though they are not global hotkeys.
2) The little displays work for the TNJ stuff like table number and number in line ect ect but they don't show up for Tourney BB or Tourney MM or any of the stack size ones
3) When I stack, the 'cycle to next in line key works properly as it did in table ninja 1. I'm having problems when I try to go back to whatever table I have just acted on. I was never able to do this in TNJ 1, I had hoped that the distinction of "cycle fwd/bkwd" vs "cycle next-in-line/prev-in-line" would fix this. I set my left trigger (xbox controller) to cycle previous in line but it still isn't consistently taking me to the table I just acted on. Most of the time it will do nothing, although it occasionally works. I set this as a global hotkey to match cycle to first in line.
4) iPoker doesn't seem to always pop to top of the stack. I'll hear the beep that I have ipoker action or am timing out but unless I hit cycle to first in line it doesn't always pop up, or it pops up when i've already timed down to about 6 seconds. Worth noting, I was stacking iPoker w/ FTP and PokerStars. PS and FTP stack fine together, and iPoker actually seems to stack fine if it is in a stack with only other ipoker games. For now I'm using a set table aside slot to place all my ipoker games into their own slot.
5) I know both iPoker and 888 are in beta, but I'm not sure what it means that it recognizes 888 tables? Aside for the issues mentioned above w/ stacking. iPoker works. 888 doesn't get included in the layout or the table cycle, so I can't see how TNJ 2 is recognizing it at all. I actually have 888.com software and not Pacific Poker, idk if that matters. My ghetto work-around is to make the hotkeys in TNJ 2 for left middle and right button the default shortcuts in 888 (F5 F6 and F7.) Then it makes the commands the same for everything. I experimented running 888 and just manually putting them in their own stack and the only issue was since TNJ 2 doesn't pick it up I have to click on the table to make it active (I can't mouse over) then my hotkey will work, but the hotkeys are working through the 888 shortcuts and my keystroke (F5, F6, F7) so nothing to do with TNJ 2 atm. The only issue with my work-around is that F5 (my universal fold button since it's the default on 888 and I can't change it) toggles Auto-Muck on and off in iPoker, and as per TNJ 2 instructions Auto-Muck should be on.
Fwiw I'm using xpadder to assign these keys to my joystick. Not sure if using xpadder and TNJ2 at the same time causes any issues. I always used xpadder with TNJ 1. I use the default joystick buttons (unmapped in xpadder) most of the time. I know xpadder isn't needed to use TNJ with a game pad. I use xpadder b/c for sites like 888 and Winemax.fr that TNJ doesn't do hotkeys for, I can manually set whatever keystroke combination those sites do allow as a shortcut to my game pad on the same button I use in TBJ 2 for that action on the sites which are supported.
Suggestions
1) Manual pixel dimension entry for slots (both table set aside and layout design.) Maybe I'm just missing it b/c I think TNJ 1 had this.
2) It would be nice to be able to have table set aside keys to correspond to each layout. The shape of my layout is going to determine what spots I'll want to be snapping table to. I may want one layout with a big stack and the ability to snap tables to a few spots around it. Then I may want another layout that is 3x3 (9 tiled) with a stack in the middle and the ability to snap tables all around it. It's awesome that you can seemingly make infinite custom layout, but that functionality is limited by the set table aside hotkeys being static across all layouts. Also, I believe you could save and import configs in TNJ 1, but with TNJ 2 it only offers a backup, so I can't manually make 2 sets of settings to swap between either.
3) It would be cool if customs layouts could have placement options by software. When tiling it would be nice to cluster the different software. For my purposes, if I could have multiple stacks and have the new tables pop to their software's stack; that would save me a click.
4) I know iPoker and 888 support are in beta but winamax.fr support would also be great
5) Save current hand history to folder hotkey? Or better yet, mark in HEM
Will probably think of some more stuff later but this is where I'm at for now. Haven't even gotten a chance to play with the default betting. I'm really glad to see by position being built into there. Would like to see filters based on your stack size in BB/M rather than just the size of the BB or the size of the ante.
Thanks for the help and lmk if you want me to send any log files or w/e.
First off, sorry for the late reply. Second, thanks for kind words!
0. What version are you using?
1. About half red/half green - once a table gets the red frame (it's Target), the icon will change to green - meaning all hotkeys work. At a later time, we want to allow you to customize which hotkeys are global and which not.
2. About HUD - are you talking about PS, or another site? Normally, they should show up.
3a. About cycle fw/bw - this is weird - according to my knowledge, it should have been fixed in 2.2.168.
3b. About cycle to prev in line - that will not take you to the table you previously acted on - the "next in line/prev in line" will only cycle you through the tables that are currently active. However, cycle bw should take you to the last table you acted on. Please let us know if that is not the case.
4. Sorry about iPoker - we're still in early beta. We plan to do more development on that starting around end of this month.
5a. For 888, we only recognize the tables - that's all - so we don't really know at this time if there is action on any 888 table yet.
5b. Adding 888 should not be very difficult to do - my initial take is that it's easier than iPoker - so we should have it rather soon
5c. xpadder should not be needed.
Suggestions:
1. I guess we can do this.
2. I see what you mean - it's not an easy thing to do, but it's definitely doable. We'll add it to our TODO list (although because of a new feature we should add soon - you might not need this :P)
3. Yes, adding multi-stack is on our TODO list - basically, you should be able to have several stacks, and for each stack have a "filter" - which tables go into that stack (based on stack size, stack BB, tournament level, site, and so on)
4. Yes on winamax - we plan to add this too - it's not an easy thing to add - I've already done an analysis of it, and it's rather complex. But in a bit of time - 4-6 months I guess, if no major issues, we should definitely include it.
5a. Added to TODO list.
5b. Please note that positional betting is "experimental" - there are still a few issues with correctly guessing the hero's position. We're still analyzing how we can compute this as close as 100% correctly - but it's not an easy task.
I will have Denise set up a teamviewer session to see what we can do to help right now. Long term, if you have any issues, please let us know and we'll do our best to help.
Best,
John
02-12-2014
, 10:14 PM
02-13-2014
, 05:36 AM