I think I figured out the problem which was the same thing happening to dabomb75. I had the first grid spot in the same spot as the stack which was messing everything up.

Got a problem with the 1.40 and fold hotkey.

I use Right-click as a fold, configured it in TOI and didn't put any in TN.

Sometimes there is a delay between my click and the action is send to the table. As i move fast (24-tabling), it causes the action to be sent to the next table my mouse is over. It happens 5% of the time, which is way too much.

How can i reduce this delay ?

Everything else runs nicely, i use pic. detection mode.

Sorry for not answering questions, I was away for a day... Glad to see everyone figured out their problems!

Thibavol: Did you try to decrease the Hotkey Delay in 'Advanced'? That should solve your problems.

About the next release:
Most important addition will be the new 'Disable Hotkey Execution' option (for people who want to keep using their external AHK/TableNinja hotkeys), and some other small improvements

Alright, so I thought I fixed the problem but I haven't.

Sometimes when there are 5 or 6 tables all open on the grid, I simply can't click on action on any of the tables. When I click something(check/call/bet), the table just blinks and no action is taken. This is causing me to time out on all my tables. It seems to only happen with their are 5/6 tables in the grid.

Thois? Sorry for all the questions.

Have you considered integrating the cash game opener from your other thread in to TOI?

Sorry if this has been asked, but is there a time frame on when the Full Tilt version will be out? Thanks and Merry Christmas!

ok just tried it out and am having one issue.

i swapped around the grid to fill out one monitor then the other. the stack is in the 0 slot, then the first table pops up in the 4 slot. then 2, 3, then another one in 4, then 5,6,7,8. everytime.

Yes in the next update you will be able to turn off all internal hotkeys (except for the keep table in grid hotkey)... I think it will be released after christmas, but perhaps I can find some time before that.
TY Nice to hear that! I believe TN has an auto-post option... Also: You can bring tables back to stack by clicking at the location where the fold button normally is (to free your grid again)...
Great!!!
OK!! Don't worry I'll create that for you when you give me the 'go' signal...
Thanks!!!
Hi, that's OK, answering questions is part of my job. Sorry for the delay, Ive been busy with some other stuff the past 2 days.

You have been the only one reporting this problem, so Im afraid I cant really help you, as it seems like it's more than a TOI problem... Perhaps I can help you if you make a video of this problem or something, so I can make an exact determination of the problem (try Camtasia).
No, this will jeopardize the speed in which TOI performs its actions. And it's a completely different kind of program, so I don't see any benefits in doing this.
If I want I can release it right now... The problem is: If I do, I have twice as much work with answering questions and creating updates and fixing bugs. I'd rather wait for 1 or 2 updates (until everything's close to perfect)... So right now, in my mind, it's planned for like the end of December/1 Januari/2 Januari...
Please check if you haven't restarted the program without saving settings... Please visualize (and read the slot labels) to see if everything is correct. Please report back... Ty.

Awesome, thanks.

Can you please auto-detect bubble for sng and DON and put the table in another grid (ex un the second monitor) if you do that I will buy your software for sure!

just pulled it up and visualized. everything is how i set it up.

Are you running TOI in Administrator mode? Did you turn off "Fill Empty Gaps" in 'Advanced'?
Is this happening all the time, or every now and then?

Yes I can do that, but its a feature that Ill add when everything is finished, its too soon for such specific options... Please request this again in a couple of weeks

was happening everytime. yes fill empty gaps was off.

pretty sure it was in admin mode. u just r click on toi then click run as admin right? is there a way to be sure it is in admin mode?

away for a couple days will try again when i get home.

My tables always stay in the grid until I fold, even when I don't have 'Keep won in grid' checked.

Doesn't bother me too much just wondering why this would be the case.

Also wen I open a new table it covers the action waiting on top of the stack. I guess this isn't really a TOI issue but is this normal? Any stacking experts know if opened tables can be sent to the bottom of the stack?

Maybe stupid question, but do you have "Single-click table activation" activated in your Pokerstars software? (under Options-Advanced Multi Table options, if I'm not mistaken)

Seems to me like this could be the cause of your problem, since TOI would pop the table in&out of the stack everytime you click the area where the buttons are (even though the action is not performed, because your single-click activation isn't activated.), this way causing the focus to switch and it happening all over again.
)
(this wouldn't explain tho why it only happens when you have 5-6 tables open...)

Tested this newest patch for a couple days and I noticed a cool side effect of sending tables to the bottom of the stack. I now find my inactive/sitting out tables pretty quickly since eventually they end up on top of the stack due to all active tables being sent to the bottom, the inactive ones eventually end up on the top if you are keeping up with all the action.

Pixel detect and the VPIP option don't really work that reliably for me still and I'm not really sure why but doesn't really matter since fast mode actually works better than the other two modes so far so I have no real complaints at the moment.

Ok the first issue was cos I had my hand history folder set incorrectly I think

For the 2nd issue would it be possible to move the tables coming from the unseated stack to the bottom of the main stack (just like you did when folding from the grid)

Was also trying the pixel detect/fast modes. Why is it necessary to disable TOI when new tables open up? It was a bit of a hindrance when a few tables opened up and no hotkeys were working.

Thanks.

OK guys, sorry I was a bit busy with other things during Christmas (lots of hangovers)... From this moment on I'll start working on this project 24/7 again...

Here's what Im going to start working on now, expect new update within 2 days (estimation):

- Option to turn off hotkey execution (if you want to use external hotkeys);
- Make the new Unseated Stack fine-tunable as well;
- Test with Euro tables, try to fix when not working;
- Enable Space & Enter hotkeys (not sure yet how);
- Try to detect sitting out tables (and add sit-back in/close table options);
- Auto buy-in functionality, auto-sit in functionality
- Auto-press yes whenever a waiting list pop-up appears
- Keep engine running while 2 second pause (when opening new tables), otherwise hotkeys won't work and stuff during this period

Please report back when you try again, as Im clueless why this is happening to you, kind of unique problem.
How are they not reliable, can you specify please, that would help me...
I think most people don't want this, I can do this for you in a custom version (email me), it's a very easy change..
Thanks for noticing this, this will be fixed next update

Wouldn't most people want this on the move only on vpip option. Anything that comes and disrupts the action on top of the stack while you are clicking away is annoying isn't it?

I'll email anyway, cheers.

Good point, Ill move to bottom only in VPIP mode in the next update, updated to-do list... Custom version will not be necessairy anymore I guess.. Thanks for your help

I would be interested in this as well Thois, using only vpip mode.

mine still isnt working properly anymore



the left unseated, 3 left(toi slot1, slot2, slot3) and the stack do work
the other dont and i therefore cannot use toi anymore

Please email me your TOI user.ini file, how are they not working? They are not used? What happends with new TOI tables when slot 1,2, and 3 are filled up already?

EDIT: Oh it's you, still having the same problems I guess... It's still kind of weird that you are the only one reporting these problems, also the screenshot of the table layout visualization looks kind of weird (parts missing and stuff)... I would love to see what's in the user.ini file, please email me (copy+paste)... Im still a bit puzzled... Also please send me your username, so I can upload a fresh TOI compilation for you, perhaps something went wrong in the compilation process... Im trying to eliminate all reasons why this is happening, though it still looks like some kind of incompatibility with your system.

Hoping that by early January, you'll throw out a version for FT. thanks!