Hello, Ive downloaded it read all the help guide, But i got a problem i have my stack on the Top left corner * Using a 22inch screen* i got 3 Toi slot on my screen which should be where table move when requiere action then go back to stack, But the problem is that for some reason My toi 2 and 3 is working fine i only got 1 table on each Toi, But the thing is my Toi 4 got like 10 table stacked and they never getting back to the main stack so it really annoying cause it like if i have 2 stack full of table and 2 Toi with only 1 table running at time.And another problem is when i fold a hand my table doesnt go back in the stack like sometime it does but sometime it just stay there and waiting for next hand,Any solution thanks
Sorry for the poor english

ok been trying it for about 30 mins, seems to move tables some times and not others, its pretty random, will try again tomorrow.

some tutorials with someone talking through the different features would be handy. Reading a load of technical stuff the average guy doesn't understand and has no care to learn about sucks.

thanks

This sounds like you mave have full=stack last slot checked on the advanced tab. at least the first part of your problem.

nice thanks alot man lol

This has nothing to do with engine delay... Are more people having these issues? I did a 2 hour test run yesterday and this didn't happen to me.
Start the TOI engine then look at the TOI titlebar.... If nothing happends, please verify you have v1.30...
Do you have 'Fill Empty Slots' turned on? If not, there isnt much I can do, the code is optimal now I think (I rewrote the left-click fold detection function like 4 times now). If these problems become too annoying, you could consider using hotkeys, as they don't seem to have these problems. I'm not sure yet what causes this problem, I think Windows turns off left-clicking while windows are moved for a few milliseconds or something (wild guess), even though this problem seems to exist to only a few users.
Yes this is on the to-do list, will definately try to add a recognition function for sitting out tables.
I would like to know what other people have to say about this... I didnt seem to have this problem... Adding a send to bottom functionality is like 1 second of work, so I can always create a custom version for you, but if more people have this problem obviously I need to build it in as an option or do it as default.
Yes sure, I will add within the next hour (to the trial version)...
You can change indivual X and Y positions of slots in the Fine-Tuning tab... If there are more tables of interest than there are slots, they will wait in the stack until a slot opens up.
Lol I built in a function that won't allow my competitor from StackAndTile to run TOI.
No seriously, it looks for how many ahk_class PokerStarsTableFrameClass are opened, if 1, it sets stack, otherwise error. You ran TOI in administrator mode?
Does it work with left-clicking the buttons at the table, did that work? Do you use AHK hotkeys?
In VPIP mode?
Yes I would like to know which options you have set in 'Advanced' and which are turned off.. This could be a PixelDetect problem.
I need more data on your problem, which mode are you playing (PixelDetect, VPIP or Fast Mode?)...

ah no, i'm using limited account. why do all these softwares need administrator? i dont get it..

I only have Full=Stack last slot that my only one

This does happen to me, I habitually just alt-tab when it happens to pop the table that was waiting back up but folded tables going to bottom would be the best default I believe. Its pretty rare I need to keep watching a table after I fold where it is much more common that I want to see a table that was at the top of the stack waiting for action.

Then you have pixeldetect problems, you can verify this by enabling Fast Mode in 'Advanced'...

From the site's FAQ:
Why is my TOI Grid instantly filled up with tables that shouldn't be there when I start the TOI Engine?
This is a PixelDetect problem, you've either changed your table background since TOI table setup or you've manually resized your tables. You have to press the 'Set Stack (Slot 0)' or 'Set TOI Grid' button to recapture your table background.

OK Thanks a lot, I will send them to back by default, this will be in the next update... Updated to-do list...

I've been using the newest version of TOI the past couple days with the only when VPIP option is enabled.

I notice that it just randomly doesn't move tables over??? anyone else?

I use TN only. Just tried it and it doesn't work clicking the buttons either.

That's the weirdest thing ever, I have absolutely no friggin idea what the hell is wrong. So some stupid insulting questions (sorry, need to make sure):
1) please check if the engine is running
2) please visualize your table setup and check if its correct
3) So VPIP Mode doesnt work, but PixelDetect/Fast Mode does work?
4) Are you running TOI in administrator mode?
5) What checkboxes are checked in 'Advanced' (when you're trying vpip mode)?
6) What are your delay settings (both hotkey delay and engine delay) in 'Advanced'?

Never mind the first 4 dumbass questions if they are all not the problem, 5 and 6 are important...

I test ran the new VPIP mode for over 4 hours now, never had these problems, nor did anyone else report these... How many % of the time does this happen? Do you use hotkeys or just left-mouse clicking?

i was seriously curious why this requires administrator. i like to keep things running limited only

I had this problem as well I have no hotkeys enabled.It caused me to fold kk from the button 25NL first hand and then I switched back to StackNTile.

Because when you compile ahk to exe most functions like wingetpos and winmove wont work unless you run the application in administrator mode

Or is there some way to fix that?

all of my programs run as admin.I have a lot of programs that require admin rights so UAC is completely disabled on my pc

Hi,Thois,my stack table don't pop up correctly sometime,and I am using only toi when vpip mode,using tableninja.need help.
Thanks!

TOI doesnt handle window focussing, it leaves that completely to TableNinja/PokerStars...

Please make sure you have enabled this: (in PokerStars) > Options > Advanced Multi-Table Options > Popup table whenever user action is required

If so, it seems for players using Table Ninja that sometimes when you fold on a grid table it seems to move to the top of the stack (according to reports of 2 players) and steal the focus of a table that requires action... If that is your problem: This will be fixed in the next update, I will move TOI tables to back of the stack (when back to stack)...

Was not an answer to you, but to Greg...

yes,Thois,that is my problem,same to the other players.

OK I will fix this first thing in the morning when I wake up (going to sleep now), expect update within 14 hours.

Also what I want to say to people to think of in the future: If you find a TOI bug while running TableNinja, first please try if the same happends when TableNinja is turned off... I can fix the problem quicker when I have this information and I get stressed out all the time because I get afraid that there is a major bug in my software, when it's just a compatibility issue...

Don't stress nothing man.In the words George Patton---"If a man does his best, what else is there?"

1) please check if the engine is running
Definitely running, I open 2-3 tables to make sure it's pulling them in. Tried it without VPIP to make sure it would work in that regard, and it has.

2) please visualize your table setup and check if its correct
Table setup is fine, they went to the correct slots without VPIP checked.

3) So VPIP Mode doesnt work, but PixelDetect/Fast Mode does work?
I turn fast mode off as I'm playing cash games and don't see the necessity to use it. Few players shoving AIPF at 50NL 50bb min tables.

4) Are you running TOI in administrator mode?
I wasn't, but I'll try it now.

5) What checkboxes are checked in 'Advanced' (when you're trying vpip mode)?
VPIP and Fill empty slots

6) What are your delay settings (both hotkey delay and engine delay) in 'Advanced'
I've tried different delays, from minimum to max.


I tried running in administrator mode and now it doesn't pick up the tables at all. I don't think anything is changed. I changed the settings a few times and reset the stack/grid a few times and nothing. I'll try more in the morning to see if it'll start running again.

yeah this is me. Sorry didn't realise it could have been TN. I was wondering why others didn't seem to notice it, so I should have thought. doh