you can confirm this is the problem by using Help->Show Testing Info, and checking the Action Required line. it should change from NO to YES when its your turn, and back to NO after you act

what version of SAT are you on? always make sure you're on the latest

i'd suggest you try to Remove the site and re-Include it... but before you press F9, click the "..." button and try a different Scan Mode. the "PW" mode is the most successful for WPN and should be the default for that site. but you can try the others and run the Testing Info to see if its working

Got it working. Not sure what it was, but on second reinstall its working now. Thanks for your help.

Is there a way to fold before the action gets to you on Bovada Zone Poker when you are in the Big Blind Sat clicks below the check/fold now button. It works great in all other positions except the big blind.

you're talking about using the SAT hotkey for "Fold" or "Fold+Stack" right?

as far as i know, the advance action checkboxes for Fold and Check/Fold are in the same locations. unless maybe in an update, they've moved the Check/Fold checkbox lower down?

can you check on other gametypes other than Zone Poker? check cash or tournament and see if the same issue happens?

Hi, quick question. While 4 tabling on ACR, I have it set up to move the mouse to table when action is on me. SAT does this weird delay and spazz thing with my cursor that takes several seconds and renders the program effectively useless for me bc of how distracting, tilting, and inefficient it is. Is this typical/is there a way to fix this? I’m kind of bummed since I just paid for a month subscription and had to snap stop using it bc it was terrible.


Sent from my iPhone using Tapatalk

hard to know exactly, but what you're describing is not typical, and of course if you want a refund its no problem. but if there is a bug, i'd like to attempt to fix it. there should be no delay or spazz.. id be interested to see a video if you can provide

Auto switch between tables doesn’t work with blitz either. What it looks like is it spazzed out and moves the mouse to a couple buttons back and forth before settling back where it started.


Sent from my iPhone using Tapatalk

you should turn of 'auto switch between tables' inside the WPN client:

https://www.stackandtile.com/sat/help/winning-poker

if SAT isnt correctly detecting when action is required, then that would be a problem.. see this page and run the Test:

https://www.stackandtile.com/sat/hel...op-incorrectly

if it still doesnt work, click File->Current Layout, and paste everything

I tried the diagnostic mouse over thing and it never said anything other than “mouse over a table”. All the settings are correct. I’ve used this program before successfully. Idk what’s going on.


Sent from my iPhone using Tapatalk

Hi can you be more specific about the spazz thing? Does the cursor everytime you click a certain hotkey go to a certain place? Does this happen every hand?

when you mouse over the table, you're supposed to get a popup with some more information. are you sure you've included the site into SAT? if you havent done that, then SAT isn't performing any actions on the table, and your problem is somewhere else. i asked you to click File->Current Layout, and paste me your full config, can you do that so i can investigate futher?

Hi,

I browsed the SaT site a little but figured I would just ask here

Will SaT fulfill this scenario:
All tables are stacked to the left and when hero action is required it moves to a slot on the right. If heroes action means he is still in the hand, the table will stay on the grid until hero wins/loses the hand or folds.

Lets say I only want 5 table placements for tables im involved in, what will happen if i have action on 6+ tables?

Will need this to work on iPoker.

yes

by default, the table will stay in the grid until you click Fold with your mouse, or until you use a "Stacking" hotkey. typically players will use "Fold+Stack" hotkey

there is an advanced option for SAT to check for the visibility of hole cards/flop cards, to determine if you went to showdown, and then after the hand is over, the table would automatically return to the stack. but this is turned off by default, because after showdown, a new hand will be starting soon anyway, and you'll have another decision. so you're only really saving a few seconds.

the tables will pop to the top of the stack so that you can see them and act on them. if a grid slot frees up, then the table will move to the newly open slot

question from PM

i have not spent too much time on the built-in PeoplesPoker site support because hardly any players play on that site

i'm not exactly sure whats going on with the Kings Hand Converter. sometimes these hand converters create a fake poker table window so that HUDs are able to be displayed. you can try the solution on this page:
https://www.stackandtile.com/sat/help/hand-grabbers

as far as I remember, the "Bet x BB" hotkeys should work, and also the "BetSizeX" hotkeys which should click the preset buttons on the table. are they not working for you?

Hello,

I tried adding an unsupported site and everything worked fine during the set up, I could find the table and add the fold, call, raise buttons. But as soon as I am done with the set up the table refuse to get added to the grid and just goes full screen all over my 32 inch screen

Any ideas to this? Site is Svenska Spel and language is only in swedish, its not possible to change the language in the software.

I tried doing this with placemint (similar program) and got the same problem. Id gladly be a paying customer if there is any solve to this issue.

/Ohhh

i recently had this issue with another player on a similar skin

unfortunately i dont think that poker software likes other softwares resizing its tables

there is a work around. open up Visualize Grid, resize a svenksa poker table with your mouse so the table is close to the grid slot size, then go back and Remove and re-Include the site using this table that you resized with your mouse. before pressing F9, click the ... button, and choose Size Preference = Ignore, and then Include the site normally. let me know if that works

This worked, thank you!

I am having some problems with hotkeys, when I use the open hand replayer hotkey or sit out next bb on Winamax it opens deposit page (icon is right next to replayer) and it sits out next hand instead of bb. Any idea on how to fix this? Is there a way to only use hotkeys on one of the sites or do I have to use them for all?

the "open replayer" hotkey works for me... are you using some weird nonstandard table size maybe? you could try Removing and re-Including the site, and before pressing F9, click the ... button, and change the Size Preference = Drag. then try it and see if it works

as far as i know, winamax only has that one sitout button on the right, so thats all that SAT clicks for both the "sitout" and "sitout next bb" hotkeys

the default version has the hotkeys enabled for all sites. you can go to the downloads page and get the "beta highDPI" version and that will allow you to enable the hotkeys only for certain sites

Does it have automatic preflop raise to 2.5x and automatic bet size post flop and auto top off features?
And does it have issue working with drivehud?
Does it have convert to bb?

Playing on igntion and chico
Where is the instruction to set up these?

[IMG][/IMG]

2nd tiled table top bar missing cannot close table.

no SAT does not handle those features. automatic bet sizing is questionable under many sites TOS. conversion to bb is difficult and is prone to bugs, and most sites have this already. i dont think there are any issues with drivehud


i would be surprised if SAT is the cause of this, but i suppose its possible. if you resize the table with your mouse, does the titlebar reappear?

It does not let me resize the table.

you could try setting up a "Close Table" hotkey, and at least that will alllow you to close it

how often does this happen? frequently? and when does it happen?

I've been having problems with missclicks, when using hotkeys.

I am not really sure what triggers it but it happens ocassionally. Sometimes my PF folds limps and yesterday while moving another table to rearrange grid over a table I had action on it accidentally minraised. Any ideas of what this can be due to and how to fix it?

just tried it happens everytime

is there a hotkey for 1/3 pot bet for ignition?