Open Side Menu Go to the Top
Register
StackAndTile StackAndTile

02-17-2017 , 10:12 AM
Quote:
Originally Posted by Steamy Kangaroo
Will do that test after I will finish playing. But I don`t have any problems mentioned in link. Tables pop up, go to stack etc.
When i press fold + stack it sends table to stack but doesn`t click fold in fold box.
Hrm well check and make sure because if SaT isn't detecting when action is required, then the fold checkbox won't work right..


Quote:
Originally Posted by Steamy Kangaroo
Thanks, 888 is working great now, play money tables and MTT tables have different coordinates for fold checkbox.
can you show me screenshots of both? is it the same for cash and MTT? is SNG and MTT the same?

you may need to use the 'Fold to Any' box instead then...
StackAndTile Quote
02-17-2017 , 02:39 PM
Quote:
Originally Posted by greg nice
can you show me screenshots of both? is it the same for cash and MTT? is SNG and MTT the same?

you may need to use the 'Fold to Any' box instead then...
play money:



cash 9max:



MTT:



I think it is from my mod and cash have more checkboxes and fold checkbox have different position. Not really issue for me once I found correct coordinates for MTT checkboxes as I do not play any cash. My custom 888 site is working without any issues.

Quote:
Originally Posted by greg nice
Hrm well check and make sure because if SaT isn't detecting when action is required, then the fold checkbox won't work right..
I did the test and action required changed from YES to NO immediately if there was action required or not.
Check/fold checkbox was clicked with fold, call checkbox was clicked with call but fold checkbox is not clicked when i press fold hotkey.
If I change advanced option to "Fol to Any" then that checkbox is clicked.

Last edited by Steamy Kangaroo; 02-17-2017 at 02:49 PM.
StackAndTile Quote
02-17-2017 , 03:17 PM
Quote:
Originally Posted by Steamy Kangaroo
Not really issue for me once I found correct coordinates for MTT checkboxes as I do not play any cash. My custom 888 site is working without any issues.
hrmmm it looks like the Fold checkboxes are just off slightly. but if you've gotten everything working then thats good


Quote:
Originally Posted by Steamy Kangaroo
I did the test and action required changed from YES to NO immediately if there was action required or not.
so the test sounds like its working

Quote:
Originally Posted by Steamy Kangaroo
Check/fold checkbox was clicked with fold, call checkbox was clicked with call but fold checkbox is not clicked when i press fold hotkey.
If I change advanced option to "Fol to Any" then that checkbox is clicked.
as i remember, i thought that the new iPoker tables use the same checkbox location for both the "Fold" checkbox as well as the "Check/Fold" checkbox. it sounds like you're saying that this isn't the case. i will have to look into it.
StackAndTile Quote
02-17-2017 , 04:06 PM
Quote:
Originally Posted by Steamy Kangaroo
Check/fold checkbox was clicked with fold, call checkbox was clicked with call but fold checkbox is not clicked when i press fold hotkey.
Please try this version v2.93u:

http://www.stackandtile.com/sat/tmp/...Setup-293u.exe
StackAndTile Quote
02-17-2017 , 05:09 PM
It is working now. Thank You!
StackAndTile Quote
02-18-2017 , 05:19 AM
Hello Greg, there winamax update today and something is going on with bet x bb with both custom site and built in site.

Here is custom site, blinds 300/600:


Here is built in site, blinds 20/40:
StackAndTile Quote
02-18-2017 , 09:41 AM
Quote:
Originally Posted by Steamy Kangaroo
Hello Greg, there winamax update today and something is going on with bet x bb with both custom site and built in site.

Here is custom site, blinds 300/600:
https://i.gyazo.com/b67a0a61b5053fe1...a567accf43.gif

Here is built in site, blinds 20/40:
https://i.gyazo.com/465d0975c37ae991...0dbee02dda.gif
Thank you very much for the report. You've been very helpful. These idiots are now preventing the delete/backspace key when the full betbox is highlighted. And although they wil allow you to Delete/Backspace one character at a time, but if you do it too many times, it resets the box.

Please try this new version v2.93v:

http://www.stackandtile.com/sat/tmp/...Setup-293v.exe

Let me know if it works
StackAndTile Quote
02-18-2017 , 11:21 AM
Will test after playing.
Recently added party MTTs to my grind and it seems they not pop-up out from stack when you face all in.

Also with ipoker there was 1 hand where I faced all-in on BB and clicked call hotkey but SaT folded my hand.

Last edited by Steamy Kangaroo; 02-18-2017 at 11:26 AM.
StackAndTile Quote
02-18-2017 , 12:39 PM
Quote:
Originally Posted by Steamy Kangaroo
Recently added party MTTs to my grind and it seems they not pop-up out from stack when you face all in.
What version of SaT are you using? Where is your stack located? Is it off-screen? Is the 2nd button (usually Call or Check) visible when facing the allin?

edit; looks like Party had an update...

Quote:
Originally Posted by Steamy Kangaroo
Also with ipoker there was 1 hand where I faced all-in on BB and clicked call hotkey but SaT folded my hand.
I just tested it, and the 'Call' hotkey didn't do anything. Thats because, when I faced the all-in, the villian covered me, and the only buttons that were visible on the iPoker table were the 1st and 3rd buttons. The 1st button was Fold as always. The 2nd Call button was removed. And the 3rd button (usually Bet or Raise) was renamed to All-in. So pressing SaT's "Bet" hotkey worked for it.

I think there is another scenario where if you cover the villian, then iPoker removed the 3rd Raise button, and only shows the 1st and 2nd. And in that case, the "Call" hotkey should work.

Can you check those and confirm?

Last edited by greg nice; 02-18-2017 at 12:51 PM.
StackAndTile Quote
02-18-2017 , 01:19 PM
Quote:
Originally Posted by Steamy Kangaroo
Recently added party MTTs to my grind and it seems they not pop-up out from stack when you face all in.
Please try this version v2.93w:
http://www.stackandtile.com/sat/tmp/...Setup-293w.exe

if you could, please test it on both cash and mtt and see if the tables correctly move out when facing an all-in
StackAndTile Quote
02-19-2017 , 04:42 AM
Just downloaded v2.93w

Bet x BB is working on built in Winamax but not on custom site, is there some lines I can add to custom site to get it working?

Quote:
Originally Posted by greg nice
if you could, please test it on both cash and mtt and see if the tables correctly move out when facing an all-in
Just did test on cash, left myself with little stack so I would be facing all-in often and table popped out of stack all the time when I was facing all-in (two buttons visible, fold and all-in) will later see how it goes in MTTs

Screenshot with buttons:


Quote:
Originally Posted by greg nice
What version of SaT are you using? Where is your stack located? Is it off-screen? Is the 2nd button (usually Call or Check) visible when facing the allin?

edit; looks like Party had an update...
I was using v2.93u, all table slots are on same screen and visible. I am not sure about visible buttons, will look into it in today's session but in my play money test it was fold and all-in buttons.

Quote:
Originally Posted by greg nice
I just tested it, and the 'Call' hotkey didn't do anything. Thats because, when I faced the all-in, the villian covered me, and the only buttons that were visible on the iPoker table were the 1st and 3rd buttons. The 1st button was Fold as always. The 2nd Call button was removed. And the 3rd button (usually Bet or Raise) was renamed to All-in. So pressing SaT's "Bet" hotkey worked for it.

I think there is another scenario where if you cover the villian, then iPoker removed the 3rd Raise button, and only shows the 1st and 2nd. And in that case, the "Call" hotkey should work.

Can you check those and confirm?
I will take a better look when I play today and save some screenshots, not sure if I can test it. I have never seen play money tables at WilliamHill, if they are there can You tell where and I could do some more testing?

My situation yesterday was on final table. I was on BB and CO showed all-in. I covered him and it was bit close situation but I pressed call and my hand just folded.

After playing bit more villain turned out to be huge nit and I am glad SaT folded lol.

If I will have some close spots in MTTs today where I can either call or fold to all-in I will test call hotkey and see how it goes but for now in all-in situations I will just use my mouse instead.

Quote:
Originally Posted by greg nice

I think there is another scenario where if you cover the villian, then iPoker removed the 3rd Raise button, and only shows the 1st and 2nd. And in that case, the "Call" hotkey should work.

Can you check those and confirm?


Played bit cash to see if I can help You. This is how it looked, but I did not press call hotkey, did not want to test it for 70 cents haha. Not sure How it looks when You face pre all-in and cover villain, will try to get some screenshots from today later on.

Last edited by Steamy Kangaroo; 02-19-2017 at 04:49 AM.
StackAndTile Quote
02-19-2017 , 12:01 PM
Quote:
Originally Posted by Steamy Kangaroo
Just downloaded v2.93w

Bet x BB is working on built in Winamax but not on custom site, is there some lines I can add to custom site to get it working?
Ahhh. Hrmmm. Its hard because I can do more things with built-in sites that I can't do with custom.

Try this v2.93x:

http://www.stackandtile.com/sat/tmp/...Setup-293x.exe

And make sure your custom site has the word "Winamax" in it. If it doesn't, you'll need to renamed your custom site file, and then Remove and re-Include it. Just make sure its not named "Winamax" or "Winamax_Small" because those are built-in sites



Quote:
Originally Posted by Steamy Kangaroo
Just did test on cash, left myself with little stack so I would be facing all-in often and table popped out of stack all the time when I was facing all-in (two buttons visible, fold and all-in) will later see how it goes in MTTs

Screenshot with buttons:
https://i.gyazo.com/a021e837c863bfbc...d16454b36d.png
Ok good so my fix in 2.93w/x looks like its working..


Quote:
Originally Posted by Steamy Kangaroo
I was using v2.93u, all table slots are on same screen and visible. I am not sure about visible buttons, will look into it in today's session but in my play money test it was fold and all-in buttons.
"all-in" button doesn't help me, because that button can sometimes be either the 2nd (call) or 3rd (bet/raise) button. In your screenshot above, its the 2nd button


Quote:
Originally Posted by Steamy Kangaroo
I will take a better look when I play today and save some screenshots, not sure if I can test it. I have never seen play money tables at WilliamHill, if they are there can You tell where and I could do some more testing?
Some iPoker skins don't have it. I was on TitanBet.uk and they have it under the Cash section there is a Real/PlayMoney dropdown on the right


Quote:
Originally Posted by Steamy Kangaroo
If I will have some close spots in MTTs today where I can either call or fold to all-in I will test call hotkey and see how it goes but for now in all-in situations I will just use my mouse instead.
Yeah thats a smart adjustment. But if you get some time to do some additional testing, that would be helpful. Because I cannote reproduce the situation.

The only reason why the 'Call' hotkey might click the fold, is if SaT doesn't think that action is required, and tries to click the 'Call' checkbox location instead. And that would come down to making sure that your iPoker site passes this Test for all situations such as normal action and all-in action:

http://www.stackandtile.com/sat/help...op-incorrectly
StackAndTile Quote
02-23-2017 , 07:10 AM
what is "Re-fill grid tables" supposed to do?
StackAndTile Quote
02-23-2017 , 11:03 AM
Quote:
Originally Posted by morphingbuildups
what is "Re-fill grid tables" supposed to do?
If you have gaps in your grid, it willl re-order tables to fill those gaps

Suppose slot 1 is your stack, and slots 2-8 are your grid. Tables start moving into your grid and its full. You Fold+Stack on slot 4, leaving a gap in your grid. Using the 'Re-Fille grid tables' hotkey will fill in that slot, and leave slot 8 empty instead
StackAndTile Quote
02-23-2017 , 11:38 AM
oh cause I was pressing that hot key when there were no tables in the grid thinking it would fill the grid and nothing was happening.
StackAndTile Quote
02-23-2017 , 11:50 AM
Quote:
Originally Posted by morphingbuildups
oh cause I was pressing that hot key when there were no tables in the grid thinking it would fill the grid and nothing was happening.
Yeah its not named great. If you have a better name, let me know.

You're looking for "Tile All Tables"
StackAndTile Quote
02-23-2017 , 10:51 PM
So I just downloaded this for the first time. I tried using it and after doing all the set up all my tables get stacked but nothing happens. It's my time to act and no table pops up. What should I do?
StackAndTile Quote
02-23-2017 , 10:54 PM
Quote:
Originally Posted by KansasCT
So I just downloaded this for the first time. I tried using it and after doing all the set up all my tables get stacked but nothing happens. It's my time to act and no table pops up. What should I do?
Hrm. What is your Move To Grid setting? And what site has the problem? And what version of Windows? And how many monitors?

The best thing for you to do is run through this Test here and the solutions:

http://www.stackandtile.com/sat/help...op-incorrectly

Let me know the results
StackAndTile Quote
02-23-2017 , 11:09 PM
Quote:
Originally Posted by greg nice
Hrm. What is your Move To Grid setting? And what site has the problem? And what version of Windows? And how many monitors?

The best thing for you to do is run through this Test here and the solutions:

http://www.stackandtile.com/sat/help...op-incorrectly

Let me know the results
Pokerstars. I have 6 slots atm. table at the top works. moves from left to right when it's my time to act. but other 2 tables (i'm playing at 3 atm) won't pop up when it's my turn to act.

You can see how I'm trying to set it up here: I'm sure I'm soing some wrong. https://www.twitch.tv/kansasct

Last edited by KansasCT; 02-23-2017 at 11:19 PM.
StackAndTile Quote
02-23-2017 , 11:18 PM
Quote:
Originally Posted by KansasCT
Pokerstars. I have 6 slots atm. table at the top works. moves from left to right when it's my time to act. but other 2 tables (i'm playing at 3 atm) won't pop up when it's my turn to act.
What is your Move To Grid setting? I'm guessing 'When Action Required'?
And what version of Windows?
And how many monitors?
Click Settings->Advanced Options, what is your Scan Mode?

Did you try any of the solutions on that page?
StackAndTile Quote
02-23-2017 , 11:23 PM
Quote:
Originally Posted by greg nice
What is your Move To Grid setting? I'm guessing 'When Action Required'?
And what version of Windows?
And how many monitors?
Click Settings->Advanced Options, what is your Scan Mode?

Did you try any of the solutions on that page?
yes.
seven.
pw.
tried using the testing thing but couldn't really spot the issue.
StackAndTile Quote
02-24-2017 , 12:43 AM
Quote:
Originally Posted by KansasCT
yes.
seven.
pw.
tried using the testing thing but couldn't really spot the issue.
Hrmmm. PW scan mode isn't great. Try doing this:

http://www.stackandtile.com/sat/help/performance

and then Remove and re-Include the site
StackAndTile Quote
02-24-2017 , 01:05 AM
Still nothing. should I set up something if I'm using two monitors?
StackAndTile Quote
02-24-2017 , 01:14 AM
Quote:
Originally Posted by KansasCT
Still nothing. should I set up something if I'm using two monitors?
Shouldn't be necessary if you're only on Win7. Leave your skype name and I'll get in touch and take a look over teamviewer
StackAndTile Quote
02-27-2017 , 02:45 PM
heya greg,

does SaT have an option that can deal with pop ups on PokerStars? (like auto-click okay to get rid of them etc)
StackAndTile Quote

      
m