Can i add to the ipoker discussion and say id also like to see a hotkey to close finished tables. Even if u had to hotkey once for the pop up then once again to close the table that would be fine.

Ive also noticed since the new update that the "bet x amount" doesnt actually click bet, it just sets the bet size to X amount and then u need to press bet. Can we get it to size the bet and click bet in 1 hotkey? Would love to see an all in hotkey also.

Also noticed that the "call" button now sometimes doesnt work. Ive noticed sometimes when the villan goes all in, the call button wont work.

I will look into it and see if its doable

Not sure what you mean by "bet x amount". There are two bet amount hotkeys in SaT, "Bet x BB" and "BetSizeX". Each of these also have corresponding settings in Advanced Options to also "Click Bet", so that they can be combined into one hotkey.

The fold/call/bet hotkeys in SaT in reality only click the 1st/2nd/3rd buttons on the table. Usually those are fold/call/bet in order. However, when someone PUTS you all-in, then iPoker only shows two buttons the 1st (fold) and the 3rd (all-in) buttons, leaving the 2nd middle (call) button out. So thats what you're seeing. In this case, you'd need to use the 'bet' hotkey. Just try to think in terms of the 1st/2nd/3rd buttons.

Compared to when someone goes all-in and you COVER with no one left to act, then iPoker only shows the 1st (fold) and 2nd (call) buttons, and leaves out the 3rd (raise) button.

The site was just down for 20 minutes or so, there was delay during the checking of the license, but it eventually succeeded after about 30-60s, so the backup server is probably working

http://leasewebnoc.com/en/networksta...r-facilities-1

Simple question: can I tile 4-6 tables, and move between tables with arrow keys or a single key clockwise?? Basically eliminating the mouse entirely.

If by 'move between' you mean 'activate and focus' then yes, but not necessarily based on direction. There are hotkeys within SaT that you can set up for "Activate next/previous slot". The 'next' slot would be the next in numerical order based on your grid slot numbering. So as you press that hotkey, the table in the next slot position would get focus. I guess you would also want to make sure that your hotkeys are being sent to the 'active table' rather than the 'table under mouse'. Also I would suggest you turn on SaT's advanced option to "Highlight active window" to ensure that you know which table is currently focused

havent been using SaT for a long time... but would it be possible now to have the stack slot at a different size then the actually table slots?

Thanks

Unfortunately still no progress on this front. And its only getting more difficult with these new poker client updates to sites such as 888 and iPoker.

Anyone here get this working with PW365/Starlive? It resize the window and crops the bottom off the cash amount making it unreadable.

try adding this line to your custom site file, then save, then close and reopen SaT

I tried drag and the other method, it's not resizing it correctly.

the only methods are 'click' or 'drag' and if those aren't working then there's really nothing that can be done for now. what network is this?

Thanks, those are the 2 I tried, I looked up issues with PlanetWin365, Starlive network on your forum before posting here. When you click Attach the table ended up looking like this and click wouldn't change it but drag would constantly keep changing its size every second.




But it did work! I had to resize the PWIN 365 table to be really small before I added a custom site in SAT, and lo behold SAT resizes it so it's playable. This is awesome and seems exactly what I was looking for. I also tried Mosaic but that doesn't even attempt to support Chico/Starlive and I got both working with this.
Pretty amazing, as it's 6 sites over 6 networks. Looking forward to testing this now!

One more q, Microgaming sites will not resize as small as the others and thus they never tile properly, how do I get all my table windows to be approximately the same dimensions?

Thank you for the prompt replies.

What you may try is to see if the poker client will 'save' the table size after it closes. So if you can get SaT to resize it properly once. You could then close the table. And then all new tables would open up to the exact correct size if the pokersite will 'remember' the previous closed table size. I think OnGame used to do this.

If Microgaming has a limit as to how small the table goes, and you want all the tables to be the same size, you may try creating a new layout, and basing the grid slot size on that Microgaming size (use that table when it asks for you to press F7) and then all the other sites will attempt to match that size

Tried a new new layout with a minimum sized Microgaming table (1st image, 2nd row, 2nd column), it's better with a few quirks.

It clips 1 table on the top right a bit, this only happens for WPN and PW365 tables.



Sometimes, only the iPoker table will overlap with others, it's just when they're all in that order it seems.



Any chance this could be improved? FWIW I have a 24" 16:9 monitor.

So you're using PW365 with SaT? You've gotten it to work?

There may always be some slight overlap or gaps. The reasoning is here:
http://www.stackandtile.com/sat/help...nt-table-sizes

So I don't know if thats whats going on here. But, that iPoker and PW365 tables look abnormally large. If you turned SaT off at that time, would you be able to resize those tables smaller with your mouse? That big iPoker table overlapping almost looks as if SaT failed to resize it. With SaT running, if you attempt to resize a table with your mouse, SaT will see that and resize the table back to the grid slot size. Maybe try to trigger it again that way

Yes, PW365 works, but the clipping remains.
I tried:
1. Turning off SAT during games and yes I can resize both windows then.
2. Keeping SAT on and trying to adjust the window sizes, it snaps back to the clipped position right after I resize and release the mouse button.

If I play without PW365, the tables tile pretty well.
If I can resize the tables with SAT off, it'd mean it is possible right?

Could you possibly add a feature to handle pop ups for ipoker? I currently use my fold hotkey for checking also (since there is no check hotkey). Problem is, u always get a popup saying would u like to check or fold (since im clicking fold when i have the option to check). Sometimes this popup is handled automatically, but other times i have to click check. super annoying when multi tabling

I know i can use the "call" hotkey to check as its the second button and i have tried it out, but missclicked called too many times in spots i didnt want to.

Well, if the 'drag' resize method didn't work, then I'm not sure what else to try. That method physically moves the mouse and drags to resize the table

The popup for "Are you sure you want to fold? You can check for free." is supposed to be handled by SaT when using a Fold hotkey. If its only working some of the time, then this will be very hard to diagnose and solve. The problem is that these iPoker popups have no window title, and therefore its difficult for SaT to correctly detect them. And if you are on the new iPoker client, and the test build for SaT, then this feature might not be working great yet.

I don't know if iPoker has an option within the software to 'save your choice'. I know PokerStars has that. Maybe you could look into setting that if its possible.

Yeah im on the new soFtware or ipoker and the test build oF SaT. This was a problem beore the new update also... dont think it got any worse with the update, i so, only slightly. I have looked into the option oF "save ur choice" like PS has but there isnt any unortunately

Also wanted to mention again about adding a close window hotkey. Doesnt have to be a hotkey to close all windows in 1 stoke, just a hotkey that will close the window directly under the mouse. Would make closing finished tables so easy plz plz plz

What version of Windows are you on?

Its on the to-do list

Just some notes and looking for some feedback from other StackandTile users.

First off I've been using stackandtile for 3+ years now and love the program but I'm looking for ways to optimize the stackandtile function.

Currently I'm playing on the default settings with "move table to grid when turn to act". Does anyone use "move table to grid when dealt cards" and prefer that option over the former? The reason I'm saying this is because I've done everything from 12 to 16 table tiled to 25+ tabling stacked during my time in online poker and for whatever reason I struggle mightily with anything 12+ stackandtiled with "move table to grid when turn to act".

I have a 30inch frontal monitor with 9 grid spaces dedicated to it and it works well but then out of nowhere 10+ tables get moved to the grid instantly and I have to act on all of them with limited time. Maybe I'm just getting worse at multi-tabling in my older age. Regardless the annoyance here is that many of those decisions would have been fast folds so I'm wondering if switching to "move table to grid when dealt cards" is a better option for me. Anyone use it?

I'm going to make a separate post from this one for my other topics.

Something in Stackandtile must be causing the "enter" key and/or possibly the space bar key to click buttons.

The networks I'm playing on: PokerStars, Fulltilt, PartyPoker, 888Poker, BlackChipPoker, and Ipoker.

It's possible that one of these pokersites is causing that problem but I've had it happen across different networks. Basically I'll be chatting an then I'll hit "enter", sometimes maybe "space" in between my posted words and the bet button is clicked on my table. I don't want to be anti-social at the tables but I've had enough misclicks by now from using the chat at the tables while playing that I'm almost certain that one of these keys triggers action. I don't even think my mouse cursor is hovered over any of the buttons when this action occurs. Any idea what is causing this at my tables?

Tested around a bit today and it seems to be the "return" key and it works on every site I tested it on. It clicks the far right button on the table in slot 1.

The cursor doesn't have to be on the table. IF there is a table in slot 1 the "return" key will trigger that action.