+1

confirmed, working on a fix

I got some troubles configuring a custom site, I have a bunch of questions.

1. Is there any way yo detect the window that pops up when you click fold, but you can also check?

2. I read the tutorial on your site regarding betsize1,betsize2 and so on. I grabbed the coor via winspy and I entered them in the .ini file as the tutoria showed. However when I try to activate the hotkey, nothing happens... what do you suggest to take look at?

3. I'm using PS hotkeys, for example I'm folding with the RButton and clearly, I want to fold with the same button on the custom site. Do I have to insert the ~ when I config the custom site hotkey? (YOu told me that in a few posts above but I'm not quite sure if I have to)

4. not a question, sry for my bad english

sry for the double post

5. I tried to config Ipoker, when it was asked to click F10 in order to fold, the call button was pressed instead. What I have to do? Config it as a custom site?

There is, but its not guaranteed. I can try to help you. What site is this on?

Right ok... so the coords need to be relative to the same table size that is listed in the custom site .ini file at the top. So look at the settings for "standard_table_width/height" at the top of the file. You need to make sure the table is that size, and then grab the coordinates and put them in.

Yeah, if you're using RButton in PS hotkeys, then you'd want to use ~RButton within SaT's hotkeys. But is there a reason you're using PS hotkeys instead of just letting SaT's Fold hotkey work for Stars too?

Likely your chatbox isn't full size.
http://www.stackandtile.com/sat/help/ipoker

Always best to check the specific site's helppage

There is, but its not guaranteed. I can try to help you. What site is this on?

Lottomatica and Ipoker

This is the Lottomatica one



Right ok... so the coords need to be relative to the same table size that is listed in the custom site .ini file at the top. So look at the settings for "standard_table_width/height" at the top of the file. You need to make sure the table is that size, and then grab the coordinates and put them in.

[settings]
table_width=843
table_height=503



I've added this to the ini file, but doesn't work
betsize1_x_coord=426
betsize1_y_coord=427


Yeah, if you're using RButton in PS hotkeys, then you'd want to use ~RButton within SaT's hotkeys. But is there a reason you're using PS hotkeys instead of just letting SaT's Fold hotkey work for Stars too?

With native PS hotkeys I'm allowed to choose the bet and autoclick, and that's lead to my another question. Is possible to have an hotkey for betsize2 + click bet? I mean, your hotkey is selecting the exact size but I need another click to send accept the size and actually bet


Likely your chatbox isn't full size.
http://www.stackandtile.com/sat/help/ipoker

Always best to check the specific site's helppage

You are right, next time I'm gonna check the site before

v2.81

http://www.stackandtile.com/forum/sh...d=5452#pid5452

http://www.stackandtile.com/sat/

try v2.81 and let me know if its any better

For iPoker, is there a reason why you're not using the built-in site?

For Lottomatica, can you use the Help->Diagnostic->Get Window Title on this popup?

Looks like that should work. Do the fold/call/bet hotkeys work for this site?

There is a checkbox in Advanced Options to "Also click Bet for all BetSize hotkeys"

For iPoker, is there a reason why you're not using the built-in site?

I'm new on Ipoker, I searched a bit in the client but I didn't find anything, I will lurk again


For Lottomatica, can you use the Help->Diagnostic->Get Window Title on this popup?

The tool doesn't work on that window, I also tried winspy, but it doesn't recognize the popup... it shows the same info as a std table



Looks like that should work. Do the fold/call/bet hotkeys work for this site?

Yep

I'm talking about within SaT. There should be no reason to use a custom site for iPoker in SaT. Just choose "iPoker" site from the drop down and Include that. That should handle the check for free popup

If that tool doesn't work for the popup, then SaT won't be able to close it. Is that Revolution network?

Make sure the table is sized at 843x503. Then take a screenshot of the table when all the buttons are visible. Click on the table and then press ALT+Printscreen, and then paste into MS Paint. Also paste me your full custom site config.

Hello.
Anybody using this theme on iPoker together with SaT? http://pokergraphics.eu/en/component...-classic-theme
(hope it`s ok to post this link)
Would like to know if everything is working good?

Also I have same problem with 888 described below that is why I am asking about iPoker theme.

All hotkeys are working perfectly with built in 888 site but tables never stayed in stack.
Now I am using only tiled layout so do not care about that tables never stay in stack.

What same problem? You can Include Site and F10 to fold works, but hotkeys don't work when you press Start?

Other SaT features rely on the correct functioning of detecting when its your turn to act. So if tables do not pass the Test described here:
http://www.stackandtile.com/sat/help...op-incorrectly

..then you may run into other problems somewhere

I had same problem with that 888 mod that tables never stay in stack when using stack and tile function. Did not have any problems to include site with built in 888 site. And all my hotkeys were working. Only problem was that tables never stayed in stack.
However now I am playing bit less tables and just use tiled layout and do not have any problems.

I'm talking about within SaT. There should be no reason to use a custom site for iPoker in SaT. Just choose "iPoker" site from the drop down and Include that. That should handle the check for free popup

I did it, I didn't config Ipoker as a custom site...I don't know why but now it is working. Probably I've messed up with the 2 ini files, one for PS, Ipoker and other site and the other one for Lottomatica



If that tool doesn't work for the popup, then SaT won't be able to close it. Is that Revolution network?


Not sure, a few months ago it was Bossmedia, but I know recently they have changed software


Make sure the table is sized at 843x503. Then take a screenshot of the table when all the buttons are visible. Click on the table and then press ALT+Printscreen, and then paste into MS Paint. Also paste me your full custom site config.

https://dl.dropboxusercontent.com/u/52890170/Lotto.png


[settings]
table_width=843
table_height=503
total_slots=4
slot1x=2997
slot1y=577
slot2x=1920
slot2y=0
slot3x=1920
slot3y=502
stack_slot=1
newtables_slot=grid
move_to_grid=preflop
oldtables_duration=5
oldtables_slot=grid
scan_mode=DWM
slot4x=1920
slot4y=259
play_mode=SaT
activate_most_urgent=1
activate_table_under_mouse=0
highlight_active_win=0
move_mouse_to_most_urgent=0
left_click_detection=1
stack_when_clicking_call_or_bet=0
stack_table_at_end_of_hand=1
drag_drop_swap_slots=1
minimize_to_tray=0
show_table_count_while_running=0
show_session_timer=0
move_888_popups=1
close_bovada_popups=1
notify_new_tables=1
notify_old_tables=1
notify_keep_in_grid=1
notify_ignore_table=1
notify_move_to_grid=0
notify_end_of_hand=0
notification_duration=3
hotkeys_fire_on_release=0
allow_action_hotkeys_on_ignored_tables=0
click_bet_for_betsize_hotkeys=1
also_keep_in_grid_when_move_to_slot_x=0
also_click_checkfold_checkbox=0
also_stack_table_for_betsizeX=0
focus_betbox=0

betsize1_x_coord=426
betsize1_y_coord=427
stars_include_logged_in_as=0
fold_checkbox_setting=Fold
click_ftp_timebank=1
detect_hidden_windows=0

[general]
show_walkthru=0
gui_x=-32000
gui_y=-32000
last_tab=
filename=Lotto.ini
is_reloading=1
version=2.81
v=sm
win_ver=6.1.7601
[sites]
number_of_sites=1
included_sites=lotto
lotto_included_executable_path=C:\Program Files (x86)\Poker Club by Lottomatica\poker.exe
lotto_included_resized_table_width=843
lotto_included_resized_table_height=503
lotto_included_hole_x_coord=314
lotto_included_hole_y_coord=320
lotto_included_fold_color=0xa09b3
lotto_included_call_color=0xecbd0
lotto_included_bet_color=0x438f57
lotto_included_table_color_behind_holecard=0x225b8 3
lotto_included_flop_x_coord=248
lotto_included_flop_y_coord=204
lotto_included_table_color_behind_flop=0x535353
[hotkeys]
number_of_hotkeys=3
hotkey1action=Fold
hotkey1key=~RButton
hotkey2action=BetSize 1
hotkey2key=S
hotkey3action=Bet
hotkey3key=~^!I
send_table_under_mouse=1

Well from the screenshots of that 888 mod, there are 3 button colors, blue, red, and black. Which button colors are you using? The table background is black, so I would only expect this problem if you're using the black buttons.

ehhh..

No, this is your LAYOUT config file. I meant that I wanted to see your custom site config file for Lottomatica. That file would be located in the folder:
C:\Program Files (x86)\StackAndTile\Sites\

But this is probably your problem, because I see you've put the betsize1 coords into your layout config file as shown above. Remove them from that file and put them in your lottomatica custom site file

lotto.ini


[settings]

standard_table_width=843
standard_table_height=503

buttons=fold,call,bet

action_button=fold

fold_button_x_coord=359
fold_button_y_coord=472
fold_button_region_topleft_x_coord=340
fold_button_region_topleft_y_coord=461
fold_button_region_bottomright_x_coord=493
fold_button_region_bottomright_y_coord=489

call_button_x_coord=531
call_button_y_coord=475
call_button_region_topleft_x_coord=508
call_button_region_topleft_y_coord=462
call_button_region_bottomright_x_coord=657
call_button_region_bottomright_y_coord=485

bet_button_x_coord=708
bet_button_y_coord=477
bet_button_region_topleft_x_coord=669
bet_button_region_topleft_y_coord=462
bet_button_region_bottomright_x_coord=824
bet_button_region_bottomright_y_coord=491

use_basic_click=0

table_class=Qt5QWindowGLOwnDCIcon

table_include_title_text=Miguardoilflop
table_exclude_title_text=

[settings]

yeah like i said, you need to put the betsize coords in THAT file. and remove the repeated [settings] line at the bottom

ok now I got, but I can't get it work.
I've changed the size of the window in order to use only one instance of S&T.
Below you can find the new lotto.ini file with the new window size.
At the very end I include a winspy + screenshot , and the cursor is on the betsize2

[settings]

standard_table_width=711
standard_table_height=429

buttons=fold,call,bet

action_button=fold

fold_button_x_coord=368
fold_button_y_coord=409
fold_button_region_topleft_x_coord=286
fold_button_region_topleft_y_coord=393
fold_button_region_bottomright_x_coord=415
fold_button_region_bottomright_y_coord=416

call_button_x_coord=442
call_button_y_coord=405
call_button_region_topleft_x_coord=424
call_button_region_topleft_y_coord=391
call_button_region_bottomright_x_coord=554
call_button_region_bottomright_y_coord=417

bet_button_x_coord=586
bet_button_y_coord=401
bet_button_region_topleft_x_coord=563
bet_button_region_topleft_y_coord=392
bet_button_region_bottomright_x_coord=691
bet_button_region_bottomright_y_coord=415

use_basic_click=0

table_class=Qt5QWindowGLOwnDCIcon

table_include_title_text=Miguardoilflop
table_exclude_title_text=

betsize2_x_coord=360
betsize2_y_coord=333

You shouldn't need to change the custom site config file if you want to change your table size. Once the custom site config file is built, it will scale itself to whatever grid slot size you choose. So if you want to change your grid slot sizes, all you need to do is use File->New Layout. So your old config file wouldve been fine

That screenshot shows coords 364x364, not 360x333...

I didn't change the custom config file, I just did again the custom site setup.
If you remember a few days ago I asked whether I can use 2+ instances of S&T. Well, now I've changed my mind and I'm using only one, so I setup the Lottomatica custom site in my main S&T.

Yep, the coords are 364x364 in the screenshot, but even if I changed them, I don't get the result I want. I already tried

Yes I realize what you did. I'm saying you wouldn't have needed to go through the custom site wizard a second time. SaT will scale all those numbers to the grid slot size of your layout.

Hrmmm. Each time you change that file though, you need to save it and close and re-open SaT. But then I don't really know what else could be wrong..

Figure it out, now it is working. Most likely I edited the ini file, saved but not closed and reopened S&T, sorry for taking your time

anyone having problems with FTP today?