[TABLE MANAGER] StackAndTile
02-07-2017
, 05:24 PM
02-09-2017
, 01:54 AM
02-15-2017
, 04:37 AM
Hi Greg,
today i tried to fix problems I wrote You in PM about but couldn`t fix it.
Only fixed that betsize5 works for 888 now.
But bet x bb does not work for 888 and winamax. Will add screenshots and configs here, maybe you see something I am missing.
Now when I press any bet x bb hotkey it looks like something is happening in betbox but it always just puts 0 at betbox.
888 mod screenshot:
888 custom site:
Winamax custom site:
Layout config:
today i tried to fix problems I wrote You in PM about but couldn`t fix it.
Only fixed that betsize5 works for 888 now.
But bet x bb does not work for 888 and winamax. Will add screenshots and configs here, maybe you see something I am missing.
Now when I press any bet x bb hotkey it looks like something is happening in betbox but it always just puts 0 at betbox.
888 mod screenshot:
888 custom site:
Spoiler:
Winamax custom site:
Spoiler:
Layout config:
Spoiler:
02-15-2017
, 04:46 AM
Sorry for double post but there was other issue with bet x bb before also.
It was for 888 and hive poker when I put bet 2.15 bb
Here are screenshots:
Is there way to fix it so SaT does just put in betbox round numbers because on those sites when it puts exact 322.5 hive thinks bet should be 3225 and 888 thinks 32250?
Also forgot to mention on my previous post on smaller sized tables my 888 custom site is working perfectly and bet x bb is working.
Here is custom 888 site that is working on layout with 640x469 table sizes:
It was for 888 and hive poker when I put bet 2.15 bb
Here are screenshots:
Is there way to fix it so SaT does just put in betbox round numbers because on those sites when it puts exact 322.5 hive thinks bet should be 3225 and 888 thinks 32250?
Also forgot to mention on my previous post on smaller sized tables my 888 custom site is working perfectly and bet x bb is working.
Here is custom 888 site that is working on layout with 640x469 table sizes:
Spoiler:
02-15-2017
, 01:58 PM
This same thing is happening on 888 and winamax. In the end I just pressed betsize 5 hotkey which set all-in.
Quote:
Ahhh. Yeah see this is the stuff that I can do with the built-in sites that I can't with the custom sites. On the built-in 888 sites, if SaT detects a tournament table, it rounds the bet to a whole number. 888 tournament tables don't allow the "." period character in the betbox.
I just tested and Hive play money cash does allow the "." but the bet button doesn't like it
Try this version v2.93t
http://www.stackandtile.com/sat/tmp/...Setup-293t.exe
Let me know if HivePoker 'bet x bb' is fixed
I just tested and Hive play money cash does allow the "." but the bet button doesn't like it
Try this version v2.93t
http://www.stackandtile.com/sat/tmp/...Setup-293t.exe
Let me know if HivePoker 'bet x bb' is fixed
I tried it before but on bigger size bet x bb was not working. Weird thing is my smaller custom site also stopped working and I can not use bet x bb anymore.
02-15-2017
, 02:57 PM
Can you do Help -> Diagnostic -> Get Window Title, and paste me the results for the 0.02/0.04 table?
Quote:
I will better just use round numbers like 2.1x or 2.2x because I plan to keep using that 888 mod which is much better than default 888 site.
I tried it before but on bigger size bet x bb was not working. Weird thing is my smaller custom site also stopped working and I can not use bet x bb anymore.
I tried it before but on bigger size bet x bb was not working. Weird thing is my smaller custom site also stopped working and I can not use bet x bb anymore.
02-15-2017
, 04:50 PM
will try MTTs tomorrow and will see if bet x bb is working on larger sized tables but previously it was not working and i haven`t changed anything to my layout or smaller custom site.
It was 1c/2c table and if you still need results here they are:
title=[Amsterdam NLH 1?/2?],class=[Qt5QWindowIcon]
what about winamax custom site bet x bb?
went to 1/2 play money in case 1c/2c cash was too little:
Last edited by Steamy Kangaroo; 02-15-2017 at 04:57 PM.
02-15-2017
, 06:28 PM
try these lines in your custom sites:
888:
Code:
regex_tournament=S).*Blinds
regex_tournament_blinds=S)([\$??]?\d{1,3}(?:,\d{3})*)/([\$??]?\d{1,3}(?:,\d{3})*)
Code:
regex_tournament=S).*Buy-in
regex_tournament_blinds=S)(\d{1,3}\.?\d?\d?k?)-(\d{1,3}(?:,\d{3}|\.?\d?\d?k?))
yes this makes sense now, because custom sites can't read special blinds for cash tables. so custom sites will always run into that problem
02-17-2017
, 02:24 AM
Bet x bb was working perfectly on both sites. Thank You.
However advanced fold checkbox was not working for new custom 888 and ipoker.
For 888 it is probably easy to solve as I must have put bit wrong coordinates and will fix myself that. But ipoker I am using built in site and was surprised it did not work. Will remove/add again and see what happens.
And I have one more question about custom sites and best way to locate exact coordinates.
So for example I make custom 888 site for my layout which have 733x533 sized slots.
SaT resizes table. I press ALT+PRT SC on table and paste it in paint.
Then I go in paint and move mouse cursor on fold checkbox (not sure why mouse cursor is not seen in screenshot)
So I get 415x468 for fold checkbox and i put
fold_checkbox_x_coord=415
fold_checkbox_y_coord=468
is this correct way of finding and adding coordinates?
Also on screenshot above you can see table size is 719x526 (because of those invisible win10 boarders i believe?)
But my custom site starts with
[settings]
standard_table_width=733
standard_table_height=533
So should i keep everything like I have been doing or I should resize table in paint to 733x533 and then find coordinates? Or should I change standard_table_width and standard_table_height to 719x526 in custom site and then put coordinates?
Just want to know what is correct method.
Thanks.
However advanced fold checkbox was not working for new custom 888 and ipoker.
For 888 it is probably easy to solve as I must have put bit wrong coordinates and will fix myself that. But ipoker I am using built in site and was surprised it did not work. Will remove/add again and see what happens.
And I have one more question about custom sites and best way to locate exact coordinates.
So for example I make custom 888 site for my layout which have 733x533 sized slots.
SaT resizes table. I press ALT+PRT SC on table and paste it in paint.
Then I go in paint and move mouse cursor on fold checkbox (not sure why mouse cursor is not seen in screenshot)
So I get 415x468 for fold checkbox and i put
fold_checkbox_x_coord=415
fold_checkbox_y_coord=468
is this correct way of finding and adding coordinates?
Also on screenshot above you can see table size is 719x526 (because of those invisible win10 boarders i believe?)
But my custom site starts with
[settings]
standard_table_width=733
standard_table_height=533
So should i keep everything like I have been doing or I should resize table in paint to 733x533 and then find coordinates? Or should I change standard_table_width and standard_table_height to 719x526 in custom site and then put coordinates?
Just want to know what is correct method.
Thanks.
02-17-2017
, 02:34 AM
Removed and added again ipokernew advanced fold checkbox still not working when i press "Fold + Stack table" hotkey. Before it was always working, i believe couple days ago there was some ipoker upgrade. Is checkbox coordinates maybe moved a bit?
Here is screenshot of table:
Here is screenshot of table: