worked thank you

Hey Greg!

Nice to see you're still doing business after so many tears (uncorrected funny typo).

I've tested TableTamer and it has a nice feature - remove title bars and window frames - especially for those of us playing on 24" monitors. Looking forward to see that in StackAndTile as well.

What do you say?

The bug is fixed now, thx.
However, now it's taking too much time for the tables to pop up/move to the grid after action, which leads to occasional time outs and generally less time per table = less efficiency

Thanks man. I seem to have some very loyal customers who find great value from the software which makes me happy


Its a possibility, I think it was requested maybe once before. I will look into it

Well, your problem was that you would click the button, the table would move, but the click wouldn't register on the table, and you'd have to go click the button a second time.

In v2.81, a small change was made so that now, SaT sees the click, delays, and then moves the table. This small delay allows the table some time to process the click before SaT moves the table. I thought that may be the cause, but wasn't sure. If you say the problem is gone, then thats good.

By default, the delay is 150ms. That shouldn't really be causing time outs. But it would cause you to feel as if SaT is less "responsive". You can tweak this delay by following the instructions on this page, and looking for the setting for "action_delay"
http://www.stackandtile.com/sat/help...vanced-options

For example, if you wanted to lower it to 100ms, your layout file would look like this:

I use a 8 table grid.
Sometimes tables move to another slot.
FE 3 tables are on the grid in slot1, 2 and 3. When I click fold on lot1 and 2 the table in grid 3 sometimes moves to grid 1. I want tables once they are in theire slot to remain there untill I click a button.

Its not supposed to do that. You didn't mention your full setup, like which slot is your stack, when do tables move to grid, are you using 'Stack Table at End of Hand', etc. So really I need more information for the moment..

Especially for tables already in the grid, such as the table in slot3 in your example.. Those tables should never move to another grid slot unless you drag/drop or use a hotkey. If the table is moving from slot3 to slot1 (and slot1 is NOT your stack), then probably what is happening is, the table in slot3 is moving back to the stack, and then SaT sees (correctly or incorrectly) that action is required, and then immediately moves the table back into the first available grid slot, in this case now slot1. You could determine if this is the case by turning on the Notifications in Advanced Options and seeing what popups you get when this error occurs.

ipoker (netbet, no chat) tables are not stacking; they jump right back to the grid. Stars is acting properly, any ideas?

have you tried removing and re-including the site?

http://www.stackandtile.com/sat/help...op-incorrectly

otherwise, if the action buttons are the same color as the table background, then SaT won't be able to distinguish. can you show screenshots with the buttons visible and without?

I added ipoker to my set up but because im using a mod i had to manually creat the profile.

When it my turn to act S&T thinks its a new table, a notification appears and it tries to move the table and a black box appears for a second in another slot.

Anything i can do?

What mod are you using? As long as the buttons are in the same place then the built-in settings should work

Its very weird that SaT would recognize it as a New Table when its your turn to act. Are you using some type of weird HUD or anything?

No the mod is some free thing from poker VIP very basic. I had to turn off s&T because it was titling me watching it flash all over my screen

It did continue to flash after I closed it down so I'm going to try it tomorrow see if it's any different

I unistalled the mod and it has been fine.

In the advanced setting the option "drag and drop to swap slots", if i untick that will tables stack onto of each other if there is a free slot rather than swapping positions?

id like to just stack my table ina 3x6 grind with 2 slots on each stack

Hrm if it continued to flash without SaT then I'm inclined to think that its a problem with the mod

If you untick that, then the only way to move tables around the grid will be hotkeys to "Stack table" or "Move to Next slot" or "Move to Slot X#"

SaT's layout it designed to have only 1 stack slot. That stack slot can contain unlimited tables. But all the other slots (the grid slots) can contain only 1 table each.
http://www.stackandtile.com/sat/help/overview

Thanks, I played around with a some
Setting and it seems if I use stack and tile mode and set stack slot to 0 and the other to grid I get what I want

Then pretty much you would be using the "Tile only" mode, and you'd have a normal tiled layout. But still you would only be allowed to have one table in each slot unfortunately

Hi,
I am trying to use SnT on the NJ sites, 888 and WSOP.com. Both of these sites use the 888 software but have different color interfaces. since SnT doesn't allow two separate skins to be inputted, I created an Other site for the 888 and it works fine, however when i use the 888Pacficpoker option for WSOP it lets me set it up but when i hit any button that tries to send the table back to the stack it instantly sends it back to grid. for what it is worth when I try to create an Other site for WSOP it has the same issue. for the Other site option however it does prompt a warning that the color detection is off so maybe that has something to do with it.

I saw on the FAQ on ur site that this issue can arise due to the fact that 888 software has their bet/c/f buttons as mainly black but with a color strip on the bottom, and that increasing table size can fix it, however, do to the volume of tables that I am playing, I can't make the table size any bigger than it already is. What other solutions are their?

Hrm, this may be a problem.

I need two things from you.

1. Use the menu item for Help->Diagnostic->Get Window Title, and follow the instructions. We want to get the results for both lobby windows of each skin separately. Paste me the results for each skin.

2. Remove the "888PacificPoker" site and your custom sites from SaT. Then include the built-in "888PacificPoker" and pick one skin and Include it. Then test if the tables can go back to the stack. Then remove the site, and Include the built-in site again, and this time use the other skin and Include it. And run the same test to see if the colors a problem. Basically we want to use the built-in 888 site for both skins but test them separately. Let me know the results.

Hi, I formatted and reinstalled all the things...
I encountering an issue with PS. It is very rare, but it happens while before it didn't.
It happens 3/4 times in the last 1200 hand session...
Basically I'm in the hand and I'm 3betting or 4betting, when the opponent calls the table is sent to the stack again... but I'm in the hand.
I recognize other details, do you have any idea what is causing the issue?

Well you must be using the "Stack table at End of Hand" feature. Thats the only thing that could be automatically moving tables back to the stack.

So, then something must be wrong with that. Maybe its a 4 color deck issue. Or something else related to the color of the cards. See this page:
http://www.stackandtile.com/sat/help...-and-hole-card

I tried to configure again PS Nova, without luck.
In 2 hours it happened 3/4 times so it is bearable, however I'd like to get rid of it.
I remember once I have an issue and you add a line in the config section, something about colors? Shades? Dunno... if you understand what I mean, can you plz tell me what I have to add? I want to try this change and see whether is going to work or not

The setting is "color_variation" but usually doesn't affect this issue, but its possible. Do you have that line in your layout file? Are you using the "Stack table at End of Hand" feature? Are you using 4 color deck? Are you using preferred seating?

The setting is "color_variation"
Ok, what value I should assign to it?

Do you have that line in your layout file?
No I don't

Are you using the "Stack table at End of Hand" feature?
Yes

Are you using 4 color deck?
Yes

Are you using preferred seating?
Yes

FWIW it did not work for me with the embedded 888 layout. I had to create a custom site (and add the line about color variation) before I was able to use the bet hotkeys/stack table, and even then, it doesn't work at all table sizes. Hope it works for you.

greg nice,

I've been using the 'stack and tile' option with 'move table to grid when its my turn to act', and for the most part it works perfectly, but every once in a while tables get moved from the stack behind another table in the grid (as opposed to the next empty slot in the grid). Have you seen this before? I wonder if my settings file could have been corrupted from shutting down my PC without closing SaT first. Thanks as always for the customer support!