what sites are you using?

there was never a 0 stack slot. what are you hoping to do?

let me get this straight, on first press, all tables go to grid and are locked, and on next press, all are unlocked and returned to stack? if right, what scenarios would you use this?

ok


got this request in my list already, will get to it eventually


yikes. with Aero on or off? i'm gonna try to improve things for next version. ill put a few diff settings and you can test


ok ill look into it



what is 'fold in advance'? i'm not familiar with TN. what is your SaT hotkey setup?


stacks 2? or do you mean 2 gridslots? i'm gonna try to improve things for next version, you can help me too

yes, 2 gridslots

old version is expired. nothing major has changed that would affect preflop action detection. i said to re-include sites because usually the fold button isn't grabbed correctly. so what sites are you playing on? and can you post your config .ini file?

attn everyone:

next version i'm gonna try to implement a similar thing that TOI had, where instead of scanning every table on every engine loop, it will only scan 8 at a time, and we'll see if that improves performance (compared to scanning all 24+ each time)

I play on Stars. And is this what you are looking for?


[settings]
table_width=491
table_height=365
total_slots=6
slot1x=0
slot1y=0
slot2x=473
slot2y=0
slot3x=0
slot3y=365
slot4x=472
slot4y=365
stack_slot=6
newtables_slot=6
move_on_street=preflop
slot5x=949
slot5y=0
slot6x=949
slot6y=365
alternate_scan=
activate_on_move=0
left_click_detection=0
bring_urgent_tables_to_top=1
engine_delay=675
action_delay=100
hotkeys_fire_on_release=0
[general]
gui_x=503
gui_y=281
last_tab=Settings
[sites]
number_of_sites=1
included_sites=PokerStarsHyperSimple
PokerStarsHyperSimple_included_executable_path=C:\ Program Files\PokerStars\PokerStars.exe
PokerStarsHyperSimple_included_resized_table_width =491
PokerStarsHyperSimple_included_resized_table_heigh t=365
PokerStarsHyperSimple_included_fold_color=0xcdc3b2
PokerStarsHyperSimple_included_fold_x_scaled=269
PokerStarsHyperSimple_included_fold_y_scaled=332
[hotkeys]
number_of_hotkeys=1
hotkey1action=Fold + Stack table
hotkey1key=~RButton
send_table_under_mouse=1

Well the scenarios are really every time I either want stacked or tiled tables.

I cant really think of a scenario where I would want to tile tables without locking them and where I would want to stack without unlocking them.

Its really when Im switching between playing a few tables and want them all locked and in the grid, to playing a lot of tables where now I want to unlock them and stack them.



Areo is on. It may not be anything due to the new version, I have only just started playing more tables, with 6 or 7 everything is fine.

You need to upgrade from XP.. its pointless developing software for an OS that is no longer available to buy. (it was discontinued by MS in June) so thinking long term, it has to work with aero.

OH BTW.. really liking the snap back to grid feature.

That lets me get rid of placement and solely use SAT.

Could we have the ability to swap slots by dragging with the mouse (just like placemint). This would really be used when all tables were tiled and locked to grid.

Final feature request.


When tiling all tables, could we have different grid layouts depending on number of tables in play.

What I am trying to achieve is this.

When I have 6 or less tables I want them all on the screen using my normal sized grid that fills the screen with 6 tables.

When I have 16 tables I want to use a different sized grid that allows me to put 16 tables on the screen.. the reason being is that when I tile 6 tables its because I want to play like that.

When I tile 16 tables its because I want to have a quick peak at all of them at once and check that none have gone to join waiting list, or have emtied etc, basically every so often I do a bit of house keeping and close unwanted tables

Yeah there is no /, the blind levels are in the info bar. Please change it to search it for $.
Or you could let it search for both, if / doesn't work, then have it search for $.

Yes its about the "fold in advance"

I have in TN- 'Rmouse' fold to any ,and as you see I have in
SaT -hotkey2key=~RButton,I guess they cancel each other,prob acting in the same time because I see how it post it and then disapeares.



[settings]
table_width=658
table_height=482
total_slots=8
stack_slot=1
newtables_slot=grid
move_on_street=vpip
slot1x=0
slot1y=-1
slot2x=623
slot2y=-2
slot3x=1280
slot3y=-1
slot4x=1903
slot4y=0
slot5x=0
slot5y=480
slot6x=623
slot6y=480
slot7x=1280
slot7y=481
slot8x=1903
slot8y=482
[general]
gui_x=422
gui_y=465
last_tab=Settings
[sites]
PokerStarsHyperSimple_included_executable_path=E:\ Poker\Room's\PokerStars.exe
PokerStarsHyperSimple_included_resized_table_width =658
PokerStarsHyperSimple_included_resized_table_heigh t=482
PokerStarsHyperSimple_included_fold_color=0xcdc3b2
PokerStarsHyperSimple_included_fold_x_scaled=361
PokerStarsHyperSimple_included_fold_y_scaled=441
number_of_sites=1
included_sites=PokerStarsHyperSimple
[hotkeys]
number_of_hotkeys=12
hotkey1action=Fold + Stack table
hotkey1key=~Space
hotkey2action=Fold + Stack table
hotkey2key=~RButton
hotkey3action=Call
hotkey3key=~S
hotkey4action=Call
hotkey4key=~D
hotkey5action=Bet
hotkey5key=~A

Anyway i found a way to get @ it as you can see in my conf I use the SPACE bar to "fold in advance" ,pretty anoying cuz was better to just fix that,but I spent like 5 h yesterday just for that and I quit.

For some reason with 6 tables on PS it doesn't get tiled, the table in slot 1 (top-left for me), moves to slot 4 (bottom-left). I have to manually move another table with the mouse to slot 1 to see all tables.

My comment about stack 0 is actually an error on my part, I was thinking of slot 0 under the 'New Tables slot' dropdown, and it's there, so pls ignore the previous comment.

yes. the only thing that changed was some coords for the fold button on these other stars themes. can you try setting up PokerStarsClassic theme and seeing if that works? then we can narrow it down


ill think about it



this wasnt developed for XP. it shoudl work on vista/7 no problems and i'm sure there are plenty of users on that platform. look no matter what you do, the technology used in SaT is going to be cpu intensive, since it has to scan all tables to determine if action is required. i am only talking about potential improvements for vista/7 users, which i can and will be exploring soon. but i also think this TOI-like smart scan mode will help things too

this used to be a part of Configure Grid, you could drag and swap slot locations. i dont know how hard it would be to do in the actual play grid

i've got a lot to do and i'm a one man show, so honestly i have no idea when ill get to these. much bigger priorities to get this program working smoother and then for sale. i do save all the requests though

set up two different configs (File->NewConfig), one for 6 tables and one for 16, and then switch between the two with the File menu during play. (youll probably want to set up the same sites and hotkeys on both configs)


yes, this will be changed to $ in the next version


so what are you doing now? using both Rbutton and SPACE to fold? sure thats one solution. i think your original problem was that you had this:

TN: RButton = fold
SAT: ~RButton = fold + stack

so when you right click, TN sends a fold, SaT sends a fold, SaT sends to stack. two programs were both sending a fold, so they were cancelling out. you should have done this instead:

TN: RButton = fold
SAT: ~RButton = stack only

when does the table move to slot4? are slots 2 and 3 empty? what is your NewTables setting? maybe its getting moved to slot4 because its a New Table and thats what your NewTables slot is set to

Thanks Greg, that did it. I tried with Classic, Black and Old Black and they all worked. Just HyperSimple shows problems.

ok, ill look into it for next version, thanks for the heads up

I've just experienced a problem when using stackntile and PT3, when I use PT3 and autoimport, the hotkeys for stackntile stops working.

Anyone experienced this or have an idea why this might be happening?

are you running SaT as administrator?

yes both are running as admin. but once I turn of the autoimport, SaT is working fine again...

can you try alternating which program you start first? start SaT before PT3 and see what happens, or vice versa

i just tested HyperSimple on my machine and it worked ok. my config shows fold color 0xcdc3b2, which is the same as you had in your config, and which is also the same as the other guy Sorrow23 posted in his config. so we all seem to match, and mine is working, so i dont know what the issue could be..

Tried that now, didn't work. However I was able to narrow in the problem to the hud. The hotkeys works when auto-import is on, but don't work when the hud is on. And when I press the hotkeys, that windows error(or something noice come) the one that comes when u move up and down the volume thing down right at the screen on windows.

Just a note, the other functions of SaT works even though the hud is on, the function that keeps my tables stacked.

Sorry for messy post, and thanks for help!

i just tested with PT3 hud on (as admin), and SaT (as limited), and everything worked..

this leads me to believe that its not an admin problem

i'm using PT3 3.07.4 and just saw theres a new .5 version, i dont know if that should matter

which hotkeys in particular are not working? can you try a 'StackAll' or 'TileAll' hotkey as well and see what happens?

but if you're getting a windows bonk sound, then i doubt the problem is SaT, maybe PT3 hud is doing something strange to the poker tables, but again this is the first time i've heard of this and it works for me. let me know

I use manually move table and move to newtables stack, just to move in and out of stack. Tried stackall, didn't work, but when I hit this one though, the sound didn't appear. Weird.

Also I use PTR 3.0.0 build 3, pretty old version. I agree it's probably PT3 who blocks it somehow..

Im trying to use it at cake, but when I press F9 to detect the table I get this error message.

ERROR. Table detection did not work. Window does not match the table classname or the lobby process.

Does anybody know that the problem is?

maybe cake has changed their tables recently. you can try running SaT as admin