We have sent you an answer via mail for your request. It should be working, we have described you what should be checked from your side.

hey!

can you put a zoom only filter to the tables? i usually play 3-4 zoom tables + open ring and it would be pretty nice to me. i want to get my zoom tables always near each other

Thank you for the feedback. We have added this feature request to our roadmap. As it seems it will be implemented this year.

Thanks a lot for the program! I am testing it for a week and I am pretty amazed Keep up the good job!

EDIT: Stars client has been updated, when we can expect update for SessionLord?

EDIT2: One more question, Ive never tried stars hotkeys with sessionlord running, are they working normaly? Or do I have to use your featured hotkeys (not tested yet)?

Thanks for the kind words.

The new version of SessionLord has been released which supports the new PS nations. Normally it is supported within24 hours. It took a bit longer now as a lot of stuff changed in new PS version.

You can use PokerStars hotkeys, it is no problem, but please run PokerStars as administrator to make it working normally. On the other hand, yes, you can try out our hotkeys as well, probably we have some more options that PS hotkeys do not, like increase/decrease bets with X*SB steps.

@mogkaat
Don't know if since last update, but ive noticed with sng opener when i have 2 or more different stakes for auto registering, it completely ignores a random stake.
I have my setting like this,
$15's -> register 16
$7s -> 16
$3.5's -> 16

Table count keep open 14,
Then when im playing it only registers me for 3.5s and 15s and ignores 7s...
Yesterday it was ignoring 3.5s completely and only registering 7s.
What can be the cause of this, worked perfectly before. My pokerstars lobby is sorted by enrolled descending.

Thx in advance!

We will go through your settings and all your logs to investigate your issue. We will come back to you soon.

We have checked all your settings and logs. There is no issue and SnGOpener does not ignore a random stake. From version 0.2.4184 priority rule order has been implemented for SnGOpener Session Rules. This means that your rules are evaluated in a top-down order, and the most important SnG that will be registered by SessionLord will be the SnG which fulfills a rule with the higher priority.

Yesterday, you had 2 active session rules, one for $3.5 and one for $7 stake. When you start your session some $7 and $3.5 SnGs were registered, but due to your $7 rule was the first rule, more $7 games were registered. The percentage was about 35% for $3.5 and 65% for $7 stake regarding the registrations.As you reached your maximum SnGs to keep open, SnGOpener was waiting to finish with an SnG to open up a new one for you. Once you finished an SnG, SnGOpener checks the lobby to register you to an SnG. There were several $7 and $3.5 that could be registered, but again, as your $7 rule had higher priority (it was the rule before $3.5) a $7 SnG was choosed to get registered.

As your session went ahead your $3.5 SnG were replaced by $7 SnG due this priority order.

So, if you want to get it balanced 50-50% for $3.5 and $7, you have to configure the Max/Type for SnG types, for instance to 7 and 7 if you want to keep 14 SnGs open.

Also, if you use 3 stakes ($3.5, $7 and $15), configure the Max/Type accordingly for all of them, to ensure a given dispersion for all the stakes.

You can change the priority order also, just simply darg&drop your rules to define the order.

Thx mogkaat for great explanation as always

Your welcome

The Zoom table type option is added to Table Manager custom slot filters settings, so you can filter for zoom tables from now your slots. This feature has been rolled out with the version 0.2.4210.

how can i add this zoom table type?



also could you add a replay filter too?

In Multitabling / Table Manager menu go to Slot Filters section. Add a new filter with name 'Zoom' for instance, and turn the last setup option called "Not Zoom" to "No". Use this filter for your slots where you want to sort your Zoom tables.

We add the replayer filter option also to our feature request list.

Is favourites lobby supported please?

I've subscribed to sngautocoloring in the past. Might renew, my question, is auto coloring still allowed after PokerStars new hud changes etc.....

Currently favourites tab is not supported, but it is on our roadmap.

Yes of course, all SessionLord products, including SngAutoColoring is allowed and officially approved by PokerStars even with the new rules.

SessionLord SNGOpener stopped working for me today.........

Im running the latest sessionlord and version 11545 on star's which it says it supports.

No scanning no results from scan...... I think it started working earlier..... but nothing now.

We saw in the logs that SessionLord failed to scan the lobby due to connection failure. Please close SessionLord and PokerStars, start PokerStars then SessionLord again, and check if that solved the issue.

Are you using any other new tool from today? Just to make sure it is not a compatibility issue with other software...

Today is the 3rd day in a row SL says that it cant check for updates because of network problems, try again later. Don't have to update right now but when will this work again?

We have moved our website to another IP address with the updater system also. Probably your internet provider did not update the new IP address yet for our hostname. Please try to start a Command Prompt in windows:

In start menu type "cmd" and press enter. (here is tutorial: http://windows.microsoft.com/en-us/w...-prompt-window)

Type this command:
ipconfig /flushdns

Then if you type this command:
ping web.sessionlord.com

You should see that the hostname is resolved to 79.172.252.18 IP address.

Try to start SessionLord again.

However, if you can access our website at https://www.sessionlord.com, then the updater also should work as it is located at the same site. If it is still not working, probably your SessionLord installation got corrupted, so please reinstall SessionLord. Uninstall it in Windows / Control Panel / Programs and Features section, then download the installer from our site, and install it again.

If you would like to keep your settings, just backup the c:\Program Files (x86)\SessionLord\0.2.4200\settings folder, and copy it back once you installed SessionLord again.

Hope that helps.

Hi

Ive been using your trial subscription & i gotta say i love some of your features.

However 1 questions: Everything was working fine until about 2 days ago & now whenever i try & go to the Dashboard tab it locks/crashes the program. Everything else seems to work fine. Any suggestions other than reinstall?

If i can get this resolved you got a new paying customer!

Another suggestion - once you log in its very hard to find the support email!

Hi, our support mail address is simply support@sessionlord.com. If you send us your PokerStars or SessionLord username we can check in the logs what cause your problem. For your 2+2 username we did not find any SL account.

Thanks for such a quick response - gotta say your customer support seems top notch!

My Sessionlord had been working perfectly until today (last tried 4 days ago). I am on the latest version 4216 but the ihud is not showing despuite being turned on. I have flushed the DNS and have the right IP. Any idea why?

Sent from my SM-G900I using 2+2 Forums