+1

Also +1 on bet being entered in chat window, I will try above fix later.

Fold (left button) action button not working although preaction is working as are middle and right buttons, not bad overall though.

Ok I think I have started to figure out something with the time bank problem I have been having. I have XP with 1280x1024 monitors. I tell ftp to tile them so 4 per screen. When I do that it won't click the time back. I go up a bit in size on the table and it sees the time button and if I go down a bit in size it will see the time button. Why its not seeing it at that size is frustrating but can be dealt with for now.

However this cannot, it finally sees the time button on a smaller table and hits the time button but it does not get pushed in totally and I cant hotkey it to hit the button again for me. Only way to get the time button to click is for me to click it even though it does that pushed in but not totally thing.

Do you have any of your tables overlapping? that might cause your problem with the time bank.

I don't understand your question

no

it enters wrong bet sizes into the window now, kinda weird. not betting full pot and just being wrong numbers for the % i entered? anyone else?

Auto post does blind button does work. I think this deal me mode is confusing me though.

Update: I tested it and 600 size tables work where its noticed. 700 is where it will pick up the time button again. But 650 or something around there is not visible. Used debug mode to determine when it could see the time button.

He means when he unchecks the "Auto-Post Blinds" button, and the blinds get to him, it re-checks the box and keeps him sitting in instead of sitting out.

Yes. Vista. Tables at 645 wide.

Also experiencing inability to type more than one character in Bet Size box manually.

But made 2 buy-ins in an hour!

There seems to be compatibility issues when using PokerShortcuts with Scanning Software such as TableScan and SpadeEyeLight.

The scanning software requires cleartype to be off and Poker Shortcuts require them to be on. I don't know, I'm guessing this may be the problem and the possible reason why hotkeys didn't respond well at all.

this upgrade destroyed my summer plans for sure... but guys can you help me?:

i have 2 problems...

1. as sng player i can live with few shortcuts... but i cant find a way how to bet 2,5BB at FT (with Poker shortcuts) before with FT Shortcuts i just set up betting by 0.5 BB or 1 sb ..but after this update i cant find a way how to
bet diferent sizes than 1xBB... it is vital for my game pls help

2. when i use 32 digits code to unlock software it write me ErorrCode=2 ... programme cannot connect to our server. I already writed to support hoping this will solve fast

edit: i cant even write my bet size ... always my number is autmaticly deleted...

probably i will just w8 for 1 month to bought final thing

btw: FT shortcuts was and is best software for playing poker... i realized it right now when im back to stone age ...definetly worth that 30$... gr8 work nano

All bugs below are with tournaments on FTP,

-I cant type my bet into bet sizing box(I.E.40/80 i cant type 200 for my preflop raise)

-mouse wheel with PSC isn't working properly. I have mine set up from SB increments and it is stll going in BB increments like ftp mouse wheel works

-Often have to click fold btn 2-4 times in order to make it actually fold

-Auto time bank will not work

-osd 3 on desktop backround after tourney is over and gone

-when i would hit the key to copy player name to clip board it gave me a number like 80 or something....2nd time i hit the key , it always worked fine.

Played a set tonight. Well done so far. Thank you very much

Besides:
i) Bet Amounts sometimes wrong. Most of the Time Preflop. When i try to bet Allin the slider sometimes starts too move around before finally entering somethink like Allin-25 chips.
ii) Tourneytables Hero has finished will not be closed nor will the dialog.
iii) Table Activiation: Depending on the table them, some tables get more attention. My finaltables drew PSC's attention. It was autoactivated every time, regardless if actions pending on this or any other tables. When i changed from FT- to other thems i was okay again.


Iiii) very cool: All Tourney-OSDs are working fine with racetrack and they working fine with any of my themes (each with different felt-colors!). Either FTSC nor previos PSC managed to do so.

which size is the standard, full, default size?

OK now it doesn't work. Is there a dialog for clicking "wait for big blind?" It just sits me out when I go to the table. I have the top 3 boxes checked and the blind isn't posted and I end up timing out when it asks if I want to post my blind

newbie question:

how do I open empty tables in FTP for calibration?

open empty cash tables

Yes auto time bank does work for me.

If you read on Gary's site, he mentions that auto time bank will not work if tables are cascaded (ie. the whole table is not visible). HTH's

Exactly, same here, and that's one of my favorite functions of PSC.

Felix says it doesn't work with "modded buttons". I assume he means like fold/call/raise. I do NOT have those modded, yet the preset amounts do not work.


Also, is there any way you can enable the bet slider to work for FT? I loved FTS because it increased the amount by SB's. The FT slider increases it by BB. This is a big deal to me because I always isolate to 5 BB's instead of 4.5 BB's. With FTS, I'd just have to scroll up and the amount I wanted would be there; with the FT bet slider I have to scroll up and then back down to get the amount I want. When you're doing this on 9 tables, being able to just scroll up saves a lot of time and is way less of a hassle. I'm probably the only person who wants this, so it's probly not gonna happen -- I'm sure it's asking a lot. I understand if you can't/don't want to do this, Gary, just a request.

That is included. It's on the setup tab.

click on yes if seat available dialog box does not work. I don't have no clicked above it so that's not the problem. Win xp, no mods
-also the seat available dialog does not move to the front of tables when I check the box
-I can't change the bet by typing in the box. It will put in 50% like I have it set to do and I can use the mouse wheel to change it, but I can't type in a bet. It seems to take one number at a time

I'm using Vista x64, Windows Classic Theme, UAC off, Racetrack, no avatars, Size "E" tables (ie. not resized), 6max cash games only, and everything is modded except for the bet/call/raise/timebank buttons and the wait for bb/sit out buttons are also not modded)

Ok, some updates that I've found:

Oh and I was wrong about OSD 1 not working. It does, but again, not w/ modded buttons, but not correctly.


When OSD 1 is enabled, it causes the box in which you enter your bet amount to flicker and anything you type in there, it resets w/ each key press.

For example, the action is to me and I want to bet $12. I type in "1" then "2", but instead of it being 12, it enters the 1, then the 2 over top of the 1, so that the bet amount is only $2 (it only takes one digit). I hope that is clear.

Everything else in the above quoted msg still does not work.

Also, after I click the auto post blinds checkbox myself after sitting down, when FT asks if I want to post BB or wait or sit out, PSC does not click anything for me. I also did not notice an option for this in PSC...anyone else?

Hoping this helps Gary as well as some of you other yahoos

Oh, lastly, everyone please please please go HERE!!! http://www.windyhilltech.com/poker/ps/config.php AND ESP READ STEP 8 & STEP 10!!!

Either restarting, or using the racetrack theme instead of the classic theme fixed the problem of the bet amounts being entered into the chat box. And yes, I had both calibrated correctly, had all the correct options checked for FT, etc.

Looks like Gary just loves those of us who use Racetrack more

I keed, I keed