If you are at the newest version (1.8.2.3) the viewer should remember accuracy settings between executions. Doesn't that work for you?

Failed to connect. Failed to start Piosolver. License check failed.

Piosolver-pro16 - How can i re-input the license?

That might happen for many reasons, most common being:

-something (anti-virus, firewall) is blocking the Internet access for PioSOLVER and thus the license check fails (if that happens there is a grace period to try again but it's finite)
-some major changes to hardware/operating system have reset the license

The way to proceed:

1)double click on PioSOLVER-pro18.exe (if it's in fact 16, then update)
2)see what happens there, if it asks for the key, insert the key and report the error code; if it produce some kind of error, report what it is (the most likely reason is that it's blocked from verifying the license)

It's the best to send us an email to support@piosolver.com including your registered email, key and information about the error you are getting (the error code I've mentioned above).

My version says 1.8.2, and no it doesn't work. I tried updating with "force update" but nothing changed.

Are you clicking "About" in the top menu to verify the viewer's version?
There is 0 chance that "force update" doesn't update it so if it's in fact 1.8.2 please send an email to support@piosolver.com describing at which step of:

https://www.youtube.com/watch?v=ahEu...ature=youtu.be

you are getting stuck.

Hi,

Hi, I tried to build my first tree in Pio and I get the error that I need around 10.4GB memory and only 3.8GB is available. I have turned off everything except Pio. I have i7 + 8GB ram in my laptop. What do I have to do in order to build the tree (besides using less sizings on each street)???

(sizings, ranges, pot, stacks std. 2 betsizes for every street, one raise size, betting cap of 5bets and solving accuracy to 0.35% pot like I seen in one of your videos)

It doesn't add up. If you have 8GB of RAM you should have more than 6GB available usually with everythinig turned off. It's very likely a lot of junk is running in the background.

In the newest version of Pio 10GB tree is really a humongous one. One reason for it being as big is that maybe you inserted a small bet and small raise somewhere and there are very long chains of bet-raise-raise-raise on two streets.
Feel free to post the config for that tree ("copy to clipboard" button and then paste to pastebin and link) but there is no way around reducing some options.

To be honest tree that big is almost certainly too big as the newest version uses very little RAM.

I somehow managed to solve it (have no idea how). Ran smaller tree, it went ok. tried to run the previous big one again and it went ok.

At first glance I have to say the software is great. Speed is good, I mean if you can sort of "solve" some spot in 10 minutes you can do a ton of work in 2 hours!

Maybe you opened several solvers by accident and the other ones were eating the RAM?

It seems like somehow expectation jumped from "it would be great to solve a tree with one bet size" (which takes usually below 3 minutes) to "let's solve this tree here with 2 sizes everywhere + allin". We never thought trees like that would be solvable at all. That they are practical these days is to be honest quite a miracle.

I also think adding more and more sizes everywhere is a trap. There are diminishing returns, especially for actions like donking turn/river (which usually are chosen with 0% frequency anyway and adding a size there won't change almost anything in the grand scheme of things). I am a fan of smaller trees with maybe 2nd size added here and there but yeah, as things are now it's possible to build those big ones using <8GB of RAM.

hi i just bought and installed piosolver basic successfully. then the next time i try to use it when i click go it says "connect to Piosolver before performing this operation". Anyone able to help me with this?

PioViewer is the user interface application; it's a front end to the solver engine. Use the Solver menu in PioViewer to connect to a solver. I'm not familiar with the Basic edition, so I'm not sure what your solver name(s) is/are, but look for a file with "PioSOLVER" in its name.

There is Solver->Connect at the top.
It should connect automatically though, if it doesn't it's likely there are some problems with the license.
The best would be if you follow those steps:

1)Try Solver->Connect->PioSOLVER-basic18.exe
2)if 1) doesn't work then go to the solver folder and double click on PioSOLVER-basic18.exe and report what happens (support@piosolver.com)

If it asks for the key every time you run it it's very likely that your timezone/time/date settings are incorrect. If it asks for the key but doesn't accept it the most useful piece of information is the error code it produces. Let me know.

Just to confirm (I suspect this is the case), when I lock a node which is the second action in a street and re-solve, earlier nodes in the street will adjust as well?

Also, is there any effective way to see flop adjustments to one player misplaying all turns in a similar way (for instance, consistently folding too much or raising too many draws) without setting a strategy for every single potential turn (if that's even possible, I haven't checked)?

Yes, of course, as long as they are not locked.

There isn't and it's not easy. The problem here is that most reasonable adjustments people would like to make (folding too much, calls too much, doesn't bluff enough) would result in completely obvious and blatant counter strategy.
Maybe there is something to be achieved there but I am a bit skeptical.

Eventually I'd like to be able to work through flop adjustments for stuff like folding too much on blank turns and raising too much on flushing turns but obviously it takes quite a while to input one of these spots as things are.

This is a tempting idea although it will take some thinking to develop a general language for this kind of adjustments which is both powerful enough to express desired cases and simple enough to be a popular feature.

Anyone know how to update piosolver edge? I'm not seeing anything under the tabs.

It's described in the linked guide here:
http://piosolver.myshopify.com/pages/quick-start-guide

There is also a 4 minutes video explaining the process:
https://www.youtube.com/watch?v=ahEu...ature=youtu.be

i tried Solver>Connect> went to C:\PioSOLVER and selected PioSOLVER-basic18.exe > got an error saying Failed to connect: "Failed to start PioSolver. Licence check failed."

If you are getting this message it's very likely you don't have all the files in your folder.
Please follow:

https://www.youtube.com/watch?v=ahEu...ature=youtu.be

Don't move any files out of your Pio folder, especially not the viewer.
If that doesn't solve the problem, then:

1)double click on PioSOLVERbasic18.exe
2)if it asks for the key - insert it
3)report what is happening after executing points 1) and 2) to support@piosolver.com, include your registered email and the registration key.

got it! thanks for the help

When I open my aggregation analasys in excel it looks like this

https://gyazo.com/e9a6f2266ef77241ae4f4f4aaf2f9d77

Any ideas how to sort it out ?

This is caused by regional decimal delimeter settings.
I don't use Excel so I won't point you to the exact place but you need to find delimiter settings and choose "." as a decimal delimiter and a comma (",") as a field delimiter.

Libre Office or Google docs should detect those automatically.

It's not possible although scripts generated by PioViewier ("generate script" button) are constructed in such a way that if you kill them and restart them later they will skip over already done trees (as long as you don't move the saves somewhere else).

Hi,

I get an error for imported potsize and eff. stacks.
Both with a point and comma.

https://gyazo.com/2f3d120203eb269d65bd6f488d692ba1

What am I doing wrong?

thanks