Decided to give this a try, and had a couple questions (for Ignition)

1. Is there a way to actually tile the tables so they aren't overlapping?

2. Is there an option to convert $ to BB?

1) Ignition tables have a minimum size of roughly 640px by 483px. If you try to drag the table smaller it wont go beyond this. If your monitor is 1920x1200 for example then you can fit 3 columns of tables horizontally and 2 vertically meaning a max of 6 tables. If you are willing to play with some overlap on my 1920x1200 IntuitiveTables can fit 4x3 so 12 tables. With urgent table cycling enabled or if you only play ignition you can use their pop to front to make sure you don't miss any hands.

If you want to fit more tables without overlap youll need a bigger or additional monitors. I have an ultra-wide that is 3440x1440 and this fits 5 horizontally and just about 3 vertically so 15 tables with very minimal overlap. If you want to fit more you'll need to consider the monitor resolution and generally height is the limiting factor (and dont forget the taskbar)

2) Not yet but I am making good progress expanding the team to make this possible in the future. No time frame yet but sooner rather than later if all goes well.

Thanks for the reply.

I did notice one issue so far.

I set my Fold hotkey to the Right Mouse Button. It works, but occasionally it will call a bet instead of folding.

In regards to the table size and tiling. Using another multi table software, I am able to get tables tiled like this without any overlap.




And here are the dimensions of each table

I see you posted a picture of an extra wide slot. Were you testing the hotkeys while the table was sized like this? IntuitiveTables is color/position based which keeps the hotkeys as fast as possible but the table needs to be in a slot built by IntuitiveTables.

This can be found in the Note section of Step #1 for Ignition: https://www.intuitivetables.com/setup#Site_Ignition

So for now, if you are not placing tables with IntuitiveTables or if the table is small and the side panel is opened, the hotkeys won't work properly.

If the table was in an IntuitiveTables slot and you still have the issue please let me know. I think Ignition may have slightly altered their button colors for certain skins or systems and it's possible your fold button was not detected properly. I have a fix coming for this or you can send me a PM and I will get some diagnostics info from you.

No, those images i posted were when another software was being used.

The issue with the hotkey was happening when only IntuitiveTables was being used.


Edit: Just checked out that link you provided, and I did not have Enable Fold and Show disabled, so I'm guessing that was the issue.

Edit 2: Did you see the image I posted from the other software where you can adjust both the width and height of each slot? Is that something that could be available?

Ah yeah the fold and show can cause this as well.

You can customize the size and position of individual slots using the "Custom Grid" button in the top middle of the main tab just below "Show Grid" but you won't be able to "unlock" the slot's aspect ratio to change the width separate from the height unfortunately.

I'd love to allow it but certain restrictions are in place to make many of the software;s features possible and maintaining a specific aspect ratio is one of them. If that's the main thing you are looking for I'd say stick to what you're using. Sorry about that!

I mean that sucks, but it's not something I can't get used to. The big thing is $ > BB. Once that gets sorted out, I could see myself making the switch.

The big plus is that the auto top-up seems to work a lot better.

I did have one question about it though.

From what I can tell it only works when you use a hot key for Fold or All-In. But what about if you check or bet (non all-in) on the river and lose? Is there a way for it work in that situation?

You can try the newest beta here. I've added top-up support to different situations along the way.

https://www.intuitivetables.com/versions IntuitiveTables v2.0.7.23(BETA)

As long as you have "All-In" checked for auto-top up it will also top up on river if we bet or call. It's not perfect since IntuitiveTables doesn't know if we were last to act but I've tried to cover every situation I could think of.

For calling or raising all in with the All-In hotkey this will also trigger a top-up at any point in the hand if you use "All in hotkey can call or raise All-In" option in the betting hotkeys tab bottom right.

Depending on which exact version you were on, there's also stack size checking now so the top up doesn't occur after each press unless we fall below a set threshold.

Thanks I have the new Beta now.

I do have All In checked for auto top up, but does that only work when we go or call all-in?

I had a spot where I was on the BTN and bet 3/4 on the river, lost the hand, and it didn't top up.

The All-In auto-top up works if:
1) We use the all-in hotkey followed directly by the raise hotkey without switching tables in between
2) We use the all-in hotkey to call or raise all in with the feature I mentioned enabled
3) We use the all-in hotkey with auto-bet = true at any point

The river spot you mention, did you use the raise hotkey to place the bet? Or did you click manually with the mouse. For now only directly using hotkeys will trigger the auto-top up. I will try to add mouse support in the future.

The software has worked great so far. Thanks, Dave!

A couple things that would be nice:

Convert $ -> BB (I know you said you're working on it, just giving that a +1)
More overlays? Comparing to Jurojin, I liked that their bet size overlay has a box where you can type in the % of the pot. Ex: I type in 84% and it puts 84% pot in the bet box.
Pot odds overlay? This is nice when facing an all-in and being able to quickly see your exact odds without needing to estimate.

Overall I'm quite happy with the software, though. Great work!

Thanks for the feedback Matt!

I do plan on adding the custom bet box in the future. Pot odds are still a ways off but have it marked down for the future.

The newest update IntuitiveTables v2.0.8 is live!

Click here to see all the changes: https://www.intuitivetables.com/updates?2.0.8

Some key new features:
• 📇 Table Overlays (now out of beta) - Custom Bet Buttons, on-screen RNG, and more!



• 🔊 New Sounds - Sat out table, Inactive Table, Repeated Urgent sounds!
• ⏹️ New Borders Available - New Action Required borders and Sitting Out/Inactive borders!
• ⚒️ Redesigned tabs - Borders/Sounds merged into Settings and more space added.

Additional features:
• 💼 New Version Manager tool. Beta versions will now be prompted inside the app.
• 🪛 Many bug fixes and improvements for each site.

The following guides have been fully updated as well:
Interface Guide - https://www.intuitivetables.com/guide
Site Setup Guide - https://www.intuitivetables.com/setup

Hi Dave,
I'm looking for a stack & tile type of poker tool/software and am wondering if Intuitive Tables can do what I'm looking for (or if any software does it).

I'm currently transitioning from 4-tabling Zoom (Fastforward, etc.) to playing MTT's. I'm currently using a 32in. monitor & a 24in. What I'm looking for is something that I can set up a grid with (ie. 6-tables on the 32in) and then stack another grid of 6 on top of this, where no more than 2 tables exist in each stack (if playing 12).. or 3 if playing up to 18.
I like to keep certain MTT's in specific spots on my monitor (ie. PKO's across the top row).
Currently I'm playing 6 + 4 tables (on the 2 monitors), sometimes more than this but hoping to work up to more.. and would prefer to keep play on just the 32in. screen (too much head bouncing around in an effort to follow my tables when I have more tables running).

Can this be done on Intuitive Tables? If not, are others capable of this?

Thanks.

PS - I heard about the software while watching Scrimitzu on Twitch.

Hey! Yeah this is definitely possible. You wouldn't need to set up multiple grids, you'd only need one grid (with as many slots as you want) and then enable "Multi-Stack" mode in the stack setup tab (at the top middle).

Next for custom table filters (i.e. PKO going to specific slots) you'd need to build a New Table Location filter like this:


There's currently no way to prevent slots from having X amount of tables on them but IntuitiveTables will always look for the first open/least filled slots when new tables are added. So if you have a 3x2 grid it will fill slots 1-6 first before starting again at 1.

You can also use the "Show number of tables in a stack" overlay in the overlays tab to make sure you know how many tables exist in each stack so you can balance them yourself.

If you want to try it out, you could also have IntuitiveTables sort your tables after a table opens/closes. This would automatically balance out the stacks while preserving your custom filters. If you set a filter like I showed in the photo above, you can enable these settings here (make sure Sort is set to "By Filters"). You can also use the Table Hotkey "Sort Tables" to do this manually.


The only downside to this option is there is an unavoidable alphabetical sort that occurs here within the filters, so tables may shift around more than you'd like. If you end up using the software and really need a perfect "balance stacks after table closes" option let me know and I can try to work it in.

The last piece to your setup may be adding "Skipped slots" so that other tables/sites don't fill your PKO slots automatically. In the examples I gave so far, this would look like this:

Since you will be playing stacked make sure you review the site setup page for each site you play before getting started: https://www.intuitivetables.com/setup

Also note that Ignition/Bodog/Bovada tables no longer can be stacked due to a recent update they put out. If you do play this site, I suggest making some specific Ignition slots and setting up a custom filter similar to the one I showed you above.

Feel free to reach out if you have any more questions during setup! I can definitely help you a lot faster on discord but no problem if you'd rather continue here.

hello there,

just downloaded the trail and will def run couple of sessions to check it out but i got a couple of questions

- is it possible to use fold/call/raise hotkeys on 888? there is nothing about the setup of normal hotkeys in the 888 instruction so im not sure, would be huge since 888 is rly limited on their hotkey setup
- will the software interfere with starscaption/partycaption?

thx for help

Hey! Yeah these hotkeys work for 888 you will have to make sure you have "888" selected for client skin which is Step #1 in the site setup guide https://www.intuitivetables.com/setup#Site_Pacific. If you want the Fold hotkey to hit "Check" when possible you'll have to try out step #7. There's no specific setup for Fold/Raise/Call hotkeys besides those two since it should just work after that... if not let me know.

IntuitiveTables should work fine alongside the caption programs, just make sure to not bind hotkeys to the same key in both softwares. If you have any issues running both also please let me know as there may be workarounds.

After the complete lack of customer service from jurojin, I decided to purchase a year subscription at IntuitiveTables to use for Bovada. While I had trouble setting up the overlay bet sizes, I chatted with them on discord and they walked me through it. A breath of fresh air. Thank you so much.

My computer always freezes when I am going from 6 to 7 tbl can you fix this.... fast?

Hi, I'm not sure what could cause this. If you can please send us a message on discord and we can try to figure it out. If you cant use discord let me know but that will be the fastest way to resolve any issues.

https://discord.com/invite/9NnURTpYGY

Hello,

I decided to try intuitive tables and I'm trying to set them up.
So far I encountered 1 problem and I would like to ask for your assistance.


Configure betting hotkeys:

I would like to set up various bet sizes, but *configure set bet size by street* window is inactive and I cant write anything in to it





I also have problem that betting hotkeys only work on Party but not on 888 and Stars.
Sit out all tables HK only works on Stars, but not on 888 and party

Hi, try to click the Set Bet Size action first. You can configure each one individually:


A few things to help here:
1) View the site setup page for 888, party, and stars:
https://www.intuitivetables.com/setup/pacific/
https://www.intuitivetables.com/setup/party/
https://www.intuitivetables.com/setup/stars/

2) I believe based on your post in the Caption thread, you are on a high dpi setup. You may need to review the scaling guide for IntuitiveTables here: https://www.intuitivetables.com/scaling to help avoid any issues.

If you are still using the caption programs, you may want to try using those sit out hotkeys instead. For Party/888 they should be working (and may work after you follow the setup guides) but they have made it a lot harder and hidden the sit out options behind various menus. If you really want to only use IntuitiveTables for sit out hotkeys, you can reach out and I can try to help on discord.

Hi.

Love the software.

How can I tile tables rather than stack them? I have not been able to figure it out.

Thanks.