Can you try setting a different port number?
Also, rebooting your computer will usually reset any issues.
In case you're using some sort of virtual computer, then please make sure that the two programs are running on the same virtual computer.
Finally, please set an exception in your virus scanner and firewall, just in case they're interfering with the software.

How can we set colors in matrix for % ?

I mean let say i want 25% to green 50% blue and 100% red .

Currently its default to light and dark colors , so how can we set our own color for ranges % ?

Also how to set default colors back ?

Could Scylla update this type of bar in the future? it is much more readable, I understand that the number in each color represents the % of bet freq

Actual





Update




So that it is understood, what I am asking is about visibility, not to divide set into more categories, etc.
Please this will be awesome too.. more legible data!


Also, any ETA of update?

You can use the "Apply groups to selection".
See https://www.gtoplus.com/groups-in-predefs/ for more information

Which colors are you refering to?

I changed the port number, restarted my windows OS and now I can send a range from FZP to GTO+ but not in the reverse direction.
What I do is as follow: clic on Range 1 (OOP) on the left then double click on a range in the list on the right then FZP menu -> Export to FZP (CTR-F), which is still gray and non clickable.
Am I wrong in the way to do it?

I can consider other display methods, but I don't think this particular approach would work for us.

Which colours are you referring to?

Ok, that means that the programs are now connecting to each other. GTO+ can however only export to Flopzilla once a tree has been built in it (it exports from the current decision in the navigator on top of the interface; if there's no tree, there's nothing to export). So can you please build your tree under "Build tree", and try again?

Ok it works. That's the information I missed, ie have to build a tree first. Thx for your help!

thanks Scy, I understand that there are more important things on the list! this is a minor detail

Hi,

GTO+ doesn't seem to allow the input of less than 10% bet size. Is there a way to get around this to allow min-betting when the pot is larger?

You can use the editor to manually add the bet.
No restrictions are present for the editor.

When we put ranges with weight say 25% , 50% and so on it shows colors in light and dark shade, Dark with high weighted and light with low weighted .

If we want to put our own color how can we do that ?

I tried using color group instruction but not getting the result .

Also how can we set gto + to its orignal color settings ?

Thanks

How about this ?

Yes thanks a lot .

How can i make such group ?

1. Click the "Apply groups to selection"
2. click the menu to open up the editor
3. edit the names and assign the colors you like



After closing the popup, you can select the color and start painting.

Note: this is only labeling/marking the hands, the actual percentages will not be changed - this has to be done with the "apply groups to selection" off.

I think we'll make some changes, so that if no tree has been built, GTO+ will still offer the export, and just export the preflop ranges.
There's admittedly some potential for confusion here otherwise.

Thanks Kmeirlaen a lot

How can we set bet/call/ check colors to its default settings ?

Colors are stored in the following file:
C:\Program Files\GTO\config\settings.txt

If you remove this file, GTO+ will recreate it with the default values.

These are the default values if you wish to manually edit only some part:



Kind regards,
K.

Thanks once again kmeirlaen appreciate a lot .

Yes, it is a real problem because the ranges I got in FZ are not the same as in GTO+ because "impossible" combos have been withdrawn: for instance I put a board with 444 and as a consequence most of the combos with a 4 have been deleted from the range because cards were on the board. So I have to check all ranges and make corrections.
Another issue seems to be groups are not allowed in FZ so I got my ranges but without groups, which will force me to redesign ranges, making a single range for each group.
I think that a simple menu "export range into FZ" as we right clic on a range, which would create a range with the same name and the same content in FZ, including groups, were really usefull.

When exporting, I believe that we're actually correcting for the board in the more recent versions.
Are you using the latest version of both products?
Or is there perhaps some spot that we've have overlooked?

FlopzillaPro does allow groups in its predefs.
Both programs store their predef ranges in config/newdefs3.txt.
To export from one program to another, simply copy this file.

I have FZ 2.0.7, which seems to be the last release. However the Help->About submenu says "Copyright 2018" :-)
I have GTO+ 1.4.0, which seems to be the last stable release ("Copyright 2017").
Since we are supposed to use the same ranges in both softwares, it is expected that their respective design and definitions would be exactly the same.
And since you have made the job for GTO+, I think that it should not require huge efforts to export the piece of code into FZ, right?.