Thanks Scylla!

I was wondering is it possible to create a hand category hamed OverCards to the MidCard?

Ok, I will consider it for future releases.

Del

hi, where can i see how often A9o flops A or 9 trips (i guess i just have to divide the trips % by 2?) and A or 9 toppairs (i just see the toppair category filter, but not it's subtypes)?

For this, use FlopzillaPro, and enter A9o in the matrix.
Apparently you'll hit trips in 1.35% of the cases.
And you can indeed just divide by 2.

To see a more detailed breakdown, mouse over the "3 of a kind" statistic.
For example, the chance of hitting trips on a rainbow board and a 2flush board is both 0.6735%.



A9o will hit top pair 20.27% of the time.
The interface does not include whether the top pair is an A or 9, however, we can check by switching to "combo mode".
For this, press CTRL+TAB.
Apparently there's 235200 total matchups.
If you enter 3 aces under "Dead cards", then you'll find that there's now only 3402 matchups that make top pair (without the aces, these matchups can only be from a 9).
We'll need to multiply this by 4, given that there's 4 possible aces that can come off.
So apparently, the chance of hitting top pair with the 9 is 3402 * 4 / 235200 = 5.785714%.
Similarly, the chance of hitting top pair with the A is 9 * 8514 / 4 = 14.47959%.

I have a question about multiplayer mode. I want to enter my exact hand, V's perceived range, the flop, and then look at how different turn cards affect equities. If I enter KsQs as the only hand in the first range and then say a 25% range for the second, it doesn't remove Ks and Qs as possible cards in that range. How do I remove them? Putting them in as dead cards doesn't work since it also removes them from the first range. Thanks

The KQ hand will be removed from villain's range in the equity calculations, however, it's not removed for the combo counts. We can consider adding this for future releases, although multiway mode isn't really intended for range vs hand (this is what "single player" mode is for). For the moment, if you want to know villain's combos, when corrected for the two dead cards, then just enter KQ under "Dead cards".

Would it be possible to add resizing the window like normal with the next update? The magnification isn't optimal real estate wise as it forces us to use the full window.

To zoom in/out, use SHIFT+mousewheel.

Yes I understand. Not looking to zoom in / out.

Wondering if it'd be a consideration to be able to adjust the width / height of the program itself.

FlopzillaPro has different configurations (extra options ON/OFF, group mode ON/OFF, single player/multiway).
It's not always possible to switch between these modes by manually resizing the windows.
Because of this, we have decided to go with the approach of using the toggles in the upper left.
I don't think that it would be technically possible to allow a manual resizing method as well.

Hi Scylla,

Is there any way to share some of my custom "Ranges" and "Categories" with another user who uses Flopzilla? I'm sure I could share with them my newsdef3 file... but wouldn't that just overwrite their "Ranges?"

Many thanks!
Sasquatch

For this, send your newdefs3.txt file to the other user.
They can import it with "Settings->Import predef ranges" (I would recommend them upgrading to v210 for this; it's easier to select the file).
If they select "Import into sub-category", then the ranges will be added at the bottom of their own ranges in a separate category.

Got it, thanks for the clarification.

Are you still planning to add equity on the Flop and Turn to Flopzilla Pro?

This was sort of a novelty feature in Flopzilla v1.
It's of course "fun" to know what the equity would be if the hand ended on the turn, but from a practical perspective, I don't think that it adds an enormous amount of value.
If people really want it, then we can add it, although personally I fell that it would be better to leave this feature out entirely.
The problem is that if people activate it by mis-clicking, then Flopzilla would give incorrect equity output until the program is restarted.

1 - Poderia me dizer para que serve esses filtros ao qual selecionei de vermelho?

2 - Sabe o que significa essa porcentagem dada ao lado

3 - Qual a forma correta de aplicar esse filtro?

Those buttons are to activate/deactivate the filters for the flop, turn and river.
In your bottom screenshot, the filters for the flop are activated (green), and the ones for the turn and river are deactivated (red).

This means that when the filter is activated, 66% of the hands will pass through it, and 34% of the hands will be blocked.

If you want to apply the blue filters that you placed next to the statistics, then turn the filter button on.

Hello,
I have a problem with CTRL+double click to add the clicked range to the current range since it does not work. Actually with the last release of GTO+ both ranges are visualized as a clic on the CTRL button, which is not the case with Flopzilla Pro, but double clicking has no effect, the original range has not been changed.
I work on a MacBook Pro with VMWare, may be this is the source of the problem, did anyone face this issue?

When pressing CTRL and SHIFT, do they light up in blue in the bottom of the predef menu?
For example, in the screenshot below, CTRL is being pressed.

Yes. And when I push the CTRL key the range over which my mouse pointer is, is temporarely added to the current range, suggesting that if I double clic now, the range would be the union of both ranges, wich is actually what is expected.
But either a simple clic or a double clic has no effect and the range is not updated.

And regular double-clicking to load a range dóes work?

The only explanation that I can think of is that regular double-clicking doesn't work either.

Or possibly that Ctrl+double-click has some special meaning on your system.
In that case holding CTRL should block other double-clicking functions as well.

Regular double clic works well.
Note that shift + double clic works well, which means that the issue is with the CTRL key.
May be adding a possibility to use Alt+ double clic would solve the problem.

Hello, how would I go about seeing the 2 card bckdr fd stat in unpaired rainbow flop subset boards?

Current it shows this when I filter for unpaired rainbow boards:



I would like to see this stat:

2 card backdoor flushdraws are currently not included in the preflop stats (the ones that are averaged over all 1755 flops).
This is because 2 card backdoor flushdraws don't have much value of their own.
Their value is heavily dependent on the hand and the flop, and because of this, they can't really be taken as an average.
We can consider adding them, but right at this moment they are not available.