nvm, number 5 of my paypal accounts did work (however i got so many -.-)

Try to contact PokerEnergy support, I hope they can help you with Paypal.
Also you can ask them about Stars transfer (also you can try to ask #6 from this list about it)

Sorry, I don't have Revolut.

Hey, me again
any possibilities to add hotkey for copy player name under mouse to clipboard?

For PartyPoker. Or left click on Player HUD

Sorry, no.
This option is prohibited by partypoker, and it was removed from PartyCaption by their request.

Ok thx.
But lol PartyPoker prohibited to copy Nicknames to clipboard.

Hi

Starscaption
Majority of the time spins multiplier that I play when multiplier is ≥ than 8x the table felt doesn´t change colour, it changes when is observer tables.
Why this happens? I am using this formula to know the prizepool: {[spinX]*[Buy-in]}€
Sometimes gives wrong results. All I want to know is how much it pays for first place in the table!


Thanks.

Okay so how on stars do I get the cycle tables to work then?



So for example imagine I have 12 stars tables on the 32' 4k monitor. Then let say I put another table over one of these 12 stars tables. So behind one stars table is another stars table. Previously all I had to do was press the spacebar when I hover my mouse over that table... then I would see the table behind it. Is that even called cycling or is that something else?



I want to be able to click on the table that is behind the table. Do I still go to hotkeys/basic hotkeys, Cycle forward space? But cycle mode should be which one? The thing is back then, the spacebar always worked for this on stars and 888. Thus its to get to the table that is behind the current table on that spot of the monitor.

Okay so I testing it while observing stars tables with starscaption opened.


I have Cycle Forward - Space


Cycle Mode - Across TM2 Tables and check mark on Mouse jump to table. Now when I have the mouse on a table, this is observing tables and not playing, pressing the spacebar would go to the next table and then the next table with the mouse cursor right in the middle of each table. Now is there a way to do this without the mouseshow in the middle of the table though? Back then, the mouse didn't have to be in the middle of the table. When I don't have it check mark to Mouse jump to table, the cycling does not work.



Now is there a way where... I can have a hotkey where when I click on it, I could then see the tables behind the current table? Example imagine i just want to use my mouse to go from one table to another throughout the monitors manually myself. But say on a certain spot of the table... let say there could be 2 tables behind that current table you see. So when you bring the mouse to that spot... you pressing spacebar each time would then show the other tables behind it. I am pretty certain it worked like this before.



Thus say on the monitor where you have 12 tables... but let say on that monitor you have total of 14 tables. But on one spot of that table... there are like 2 hidden tables behind one of the tables. So you want to go to that spot and then press a button where it would then go to the other tables. Is there a way to do this or not? And by that button, I don't want it to cycle through the other 12 tables. I only want it where it would show the hidden tables behind the current table. T

PaulyJames200x, it seems you need Cycle mode / In stack
This mode will work for Stars tables only, so if you have a stack of 888 tables, you need to use the same hotkey in 888Caption.

Hi
Does it work wrongly in StarsCaption v1.03d for you?

Okay apparently the cycle mode in stack is what I wanted on stars and that does seem to work. Have to try the other site. But does that work on partycaption or not with the spacebar? I remember you said a while back that was the one key you couldn't use?



Also, is it random or is there a way where when I open the lobby of a current mtt that I am playing on stars... for it to open in the same monitor that I'm current playing? For example when i'm playing in a stars mtt, i open lobby and sometimes... that lobby shows up in my 24' monitor... but most of the time it would show up in the main 32' 4k monitor. Is this completely random with the stars software? Such as imagine I try to open several lobbies on stars mtt tables... they just open up randomly throughout the screen. Is there a way to have it open on the same screen or you could have it open which screen you want or which spot you would like?

1. AFAIK there is no 'cycle in stack' mode in PartyCaption

2. There is no option 'open lobby on the same monitor'. You can use Options / Tournament lobby slot if you want to open it in a fixed position, or HUD / Table panels / OnHover / Tournament lobby, if you want to open it in popup.

Hi,
sorry for the late answer... Yes, I was already using that version.
I play in pokerstrs.PT, don´t know if that matters.

Thanks.

Another issue that I have is that starscaption keeps registering me in an extra spin n´go.
For example: I have set to open 3 spins at the time but sometimes starscaption makes the fourth while I am playing without pressing anything.
Lately this is happening more often.

Try to replace this file in StarsCaption folder.
Let me know if it helps.

Gonna try it!

Thanks!

Hi!
Starscaption -
I am using Hotkeys -> Betting hotkeys.
One hotkey is like this; <F5> PREFLOP 501bb [Auto bet]. All Positions enabled etc.

So the idea is, if i click the hotkey preflop; i go all-in.
This works usually always correct.
I am playing spin&go.
sometimes i play spin&go-flash and i noticed that, if my stack is <2bb, for example I have 1.5bb at BTN, the hotkey is ignoring the command and i have to manually bet all-in. I noticed this the last few days.
Is there any solution to this?

kind regards

Hi
Thanks for report, I'll try to check it.
It definitely worked in the past, but I recently changed how autobet hotkeys work (due to some bugs in the latest versions of the poker client).

Hi I believe I mentioned this before. But if my computer is freezing/lagging while playing lot of tables on stars.... I use HEM3 and caption... earlier when I had about 16 tables, it was basically unplayable and lagging where I was sat out at all my tables. None of the hotkeys work as I couldn't do anything as everything was frozen. HEM3 asked me to send error report few times. But then I noticed at the bottom of the taskbar, I had many starscaption tabs open.. its like starscaption and a red exclamation mark or so? I think I mentioned this to you last time and you said you heard of this and if that is the case, starscaption is causing this? How many of your users had this show up and what is the cause of it?



But not only that... during this freezing/lagging, there were literally like 8 starscaption tabs that suddenly opened at the bottom taskbar. I think after it went away when I closed caption, I then had to reopen caption and bit later, same exact thing. Like 8 starscaption tabs that suddenly opened at the bottom taskbar and this was when I had about 16 tables opened but could not press anything at any of the tables and was literally sitting out. Only once I busted out of few tables and had say 12 tables or less, only then did it seem the lag was not as bad.



Is there any setting in caption where I could make it uses less resources or anything like that? HEM mention to me to try playing without caption... I will probably try this but playing any of the sites without caption is very hard. I always assumed caption used very little cpu and ram because I rarely seen it use much cpu or ram or gpu. It doesn't at all right?

PaulyJames200x, I'm sorry, but I don't know what could be causing this.

Hello,

I'm using Stars, 888 and party caption and I have couple of problems:

1. Table manager 2 - works fine for Stars and Party, but when I add 888 (new type) all the tables start jumping left and right and from one screen to another

2. 888caption table highlight, usually there is one or two tables that have problem, table is on screen y, but frame is on my 2nd screen x, and frame is also much larger than the table itself

Hey thanks. But I believe you mentioned you had other players who had this issue before right? Or was it something you saw as well when you were playing or testing?


Because when there was the freezing/lagging and then all those starscaption tabs showing up in the taskbar, well I figure starscaption could be causing it or the stars software is causing this for starscaption.

Hi
Try to configure 'Override high DPI scaling behaviour. Scaling performed by: / System (Enhanced)' here for 888Caption and StarsCaption.
Let me know if it helps.

Some users have problems, but no one else has reported problems like yours.