UTILITY TableNinja - Hotkeys and Utilities for PokerStars - Page 451 - Poker Software -- Two Plus Two Poker Forums

Hi Denise welcome back,

playing rebuy mtt sngs can table ninja when the game first loads and starts double buy you in? You start with 1500 chips but you can also rebuy straight away, can TN2 rebuy straight away?

Also, is there a way to turn off "auto sit me back in" when the break starts without having to go to the settings in TN2? I usually have registered games popping up just after the break and always lose my time balance because Tn sits me back in

Hi,

Thanks

1) At the moment this is not possible, However i have a feature request written up and sent to the developers, the latest ticket on this is HM-8043 If you wish to be notified of when it is added please pm me your email address and ill add it to the ticket number.

2) In the annoyances tab > On a Tourney Break - Enabling this feature will cause TableNinja II to automatically fold any hands that pop up and sit you out at all tables. Use this feature to keep your time bank in tact if you need a quick break from the action.

Toggle - This will allow you to set a hotkey to toggle the on tourney break feature.

Is this not what you are looking for?

Quote

02-26-2014 , 01:25 PM

#11252

Denise26

old hand

Join Date: Jan 2012 Posts: 1,211

Quote:

Originally Posted by Sly Caveat

Cycle tables forward and backward no longer work correctly on TN1. Seems to cycle to random tables instead. Cycle to first in line still works correctly.

This causes difficult problems with stacking since you can never find a table after you're moved to the next one. I've been away from the game about 3 months, so I'm not sure when exactly it stopped working, but it was fine in November.

Please send a copy of the following files to support@alxsoftware.com and I'll check them over for errors:

1) Your TNLog and TNConfigAutoLoad files. You will find them in C:\Program Files\TableNinja

2) A screen shot of your desktop with a table and your HUD displayed. See instructions http://www.iopus.com/guides/screenshot.htm Please send the screen shot even if you don't have a HUD or custom table theme.a

Quote

02-26-2014 , 01:58 PM

#11253

OditeRussia

adept

Join Date: Oct 2012 Posts: 1,181

Thanks

Quote

02-26-2014 , 02:05 PM

#11254

mckrogh

Carpal \'Tunnel

Join Date: Jan 2009 Posts: 6,495

Quote:

Originally Posted by Sarek1910

Sad.
Anyway, this is a matter of settings in your device (or in PC).

I think you misunderstand! Its a matter of Xpadder conflicting! Not my xbox device!

NOT WORKING:
1. I start up TN2
2. I connect my Xbox controller
3. Start up Xpadder

4. Xbox controller goes to sleep
5. Xpadder shuts down that device settings

6. TN2 crash

WORKING WITHOUT XPADDER:
1. I start up TN2
2. I connect my Xbox controller
3. Xbox controller goes to sleep
4. TN2 works

So I need a fix for when xpadder shuts down device settings for my xbox controller. As you can see in my prevoious post xpadder is still open....

Last edited by mckrogh; 02-26-2014 at 02:20 PM.

Quote

02-26-2014 , 05:41 PM

#11255

JulianAssange

old hand

Join Date: Jul 2011 Posts: 1,223

Im also experiencing the TN1 delay for over a week now.

When i start my session it works perfectly and about an hour in the delay after each hotkey is really noticeable, ranging from 1 to 2 seconds ! this makes 20+ tabling almost impossible/annoying as hell. table count doesnt seem to affect this because when im down to even my final table it still has a 1+ second delay!

Ive done everything suggested itt(set admins,reinstalled,turned off holdem manager and any other background programs)

please fix this.

Quote

02-26-2014 , 05:56 PM

#11256

Pghfan987

Pooh-Bah

Join Date: Oct 2008 Posts: 3,936

Quote:

Originally Posted by JulianAssange

+1, I'm having the exact same symptoms.

Quote

02-26-2014 , 06:55 PM

#11257

mckrogh

Carpal \'Tunnel

Join Date: Jan 2009 Posts: 6,495

Quote:

Originally Posted by Sarek1910

This definitelly means problem is not in TN, but in that Xpadder.
No one from TN team do not have such device \ software to see "live" what is going on.
Please ask those who developed Xpadder.

So i just want this to b clear for anyone else reading - your not gonna support xpadder then? Its not xpadder that crash, its TN2 for god sake....

xpadder is not crashing... TN2 is!!!!!!

Quote

02-26-2014 , 06:57 PM

#11258

OditeRussia

adept

Join Date: Oct 2012 Posts: 1,181

Quote:

Originally Posted by Denise26

Hi,

Thanks

http://gyazo.com/35a1d19111bc8a417d45412e2af69613

It wont let me tick this feature, it's shaded out?

Also any idea when you will implement the ability to move each column up or down in the default betting tab:

http://gyazo.com/2baa8c15311ed5042add8a4c43c04124

Because you have to have these in order however if you change one little thing it messes the order up and you have to delete everything and start again, so we need the option to edit a column the ability to move it up or down so it is in order

Edit:

sorry I just noticed you now have the advanced in place editing option

http://gyazo.com/b2505d1c19f629add7120c3a3e9547cd

Last edited by OditeRussia; 02-26-2014 at 07:12 PM.

Quote

02-26-2014 , 07:19 PM

#11259

tn-john

centurion

Join Date: May 2013 Posts: 100

Quote:

Originally Posted by mckrogh

So i just want this to b clear for anyone else reading - your not gonna support xpadder then? Its not xpadder that crash, its TN2 for god sake....

xpadder is not crashing... TN2 is!!!!!!

Hi mckrogh,

Sorry for Sarek's response - we will look into this this week - as I have already told you privately. I will keep you posted on our findings.

Best,
John

Quote

02-26-2014 , 07:20 PM

#11260

Denise26

old hand

Join Date: Jan 2012 Posts: 1,211

Quote:

Originally Posted by JulianAssange

Quote:

Originally Posted by Pghfan987

+1, I'm having the exact same symptoms.

Hi Guys

I am sorry to hear you are having this issue with TN1 and we are looking into it, To assist with the issue can you please do the following

Please send a copy of the following files to support@alxsoftware.com and I'll check them over for errors:

1) Your TNLog and TNConfigAutoLoad files. You will find them in C:\Program Files\TableNinja

2) A screen shot of your desktop with a table and your HUD displayed. See instructions http://www.iopus.com/guides/screenshot.htm Please send the screen shot even if you don't have a HUD or custom table theme

Quote

02-26-2014 , 07:26 PM

#11261

Denise26

old hand

Join Date: Jan 2012 Posts: 1,211

Quote:

Originally Posted by OditeRussia

Hi,

About on a tourney break, this only works when you are playing a tournament and you hit the toggle on a tourney break hotkey once you do this then it will highlight the box but other than this you can't tick it manually.

Quote

02-26-2014 , 07:34 PM

#11262

OditeRussia

adept

Join Date: Oct 2012 Posts: 1,181

Oh so when I need a break or its the break I press my hotkey and then it will turn on? and it will then fold any new games that open during that time?

Quote

02-26-2014 , 09:44 PM

#11263

ma12

newbie

Join Date: Feb 2014 Posts: 31

Quote:

Originally Posted by ma12

Versión 2.2.185

- Auto close tournament after X seconds. After some time, maybe 2 hours, it stopped closing tournaments, yesterday happened the same.

Quote:

Originally Posted by Sarek1910

Closing tournaments: can you recall any additional information? What happened \ was done at the same time (ok, almost the same) - apart of simple playing tourneys?
I played yesterday a non-stop 3 hours 9 tables session and did not encounter such issues. Till the end of the session tables I was boosted out from (or won) - were closed by TN2 exactly as expected and set - after 2 seconds.

I think I have this issue isolated. It happens always at midnight. Tournaments are not auto closed and ninja tile layout stop working correctly, tables were I'm involved are moved out from the stack but when the hand ends they never return to the stack. If I change to another layout and then back to ninja tile all tables return to the stack but again when a table is moved out from the stack it never returns...

The only solution is to close TN2 and open it again, but is not easy with 30 tables oppened.

Quote

02-27-2014 , 06:37 AM

#11264

Sarek1910

journeyman

Join Date: Apr 2013 Posts: 267

Quote:

Originally Posted by ma12

Interesting
OK, I will try to reproduse exactly at midnight.

Quote

02-27-2014 , 06:41 AM

#11265

Sarek1910

journeyman

Join Date: Apr 2013 Posts: 267

Quote:

Originally Posted by OditeRussia

Oh so when I need a break or its the break I press my hotkey and then it will turn on? and it will then fold any new games that open during that time?

From TN2 FAQ:
On a Tourney Break - Enabling this feature will cause TableNinja II to automatically fold any hands that pop up and sit you out at all tables. Use this feature to keep your time bank in tact if you need a quick break from the action.
Toggle - This will allow you to set a hotkey to toggle the on tourney break feature.
Show TN2 window when on a break - This will bring up the TN2 client when you are on a tourney break.

All this is on Annoyanses tab and functionality was not changed since TN2 appeared.

Quote

02-27-2014 , 02:38 PM

#11266

mckrogh

Carpal \'Tunnel

Join Date: Jan 2009 Posts: 6,495

Quote:

Originally Posted by tn-john

Hi mckrogh,

Sorry for Sarek's response - we will look into this this week - as I have already told you privately. I will keep you posted on our findings.

Best,
John

Today I updated Xpadder and now theres no problem. Just want everyone to know that xpadder released a new update earlier this year. This will fix that TN2 crash.

Quote

02-27-2014 , 03:06 PM

#11267

tn-john

centurion

Join Date: May 2013 Posts: 100

Quote:

Originally Posted by mckrogh

Today I updated Xpadder and now theres no problem. Just want everyone to know that xpadder released a new update earlier this year. This will fix that TN2 crash.

Hi mckrogh,

That's good news

Please note that I already bought a wireless gamepad for testing together with xpadder - so in case you have any other issues, please let us know and we'll take a look.

Best,
John

Quote

02-27-2014 , 03:34 PM

#11268

mckrogh

Carpal \'Tunnel

Join Date: Jan 2009 Posts: 6,495

Quote:

Originally Posted by tn-john

Hi mckrogh,

That's good news

Please note that I already bought a wireless gamepad for testing together with xpadder - so in case you have any other issues, please let us know and we'll take a look.

Best,
John

Quote

02-28-2014 , 10:44 AM

#11269

snoep

centurion

Join Date: Mar 2013 Posts: 142

TN2 is flicker a busy_cursor box. How can i turn this off? I'm using version 2.2.185.0.

Quote

02-28-2014 , 11:07 AM

#11270

Denise26

old hand

Join Date: Jan 2012 Posts: 1,211

Quote:

Originally Posted by snoep

TN2 is flicker a busy_cursor box. How can i turn this off? I'm using version 2.2.185.0.

Hi,

If you go to the setup tab > advanced > disable "Show visually when TN2 is waiting for an action to complete.

Quote

02-28-2014 , 09:36 PM

#11271

reddev

adept

Join Date: Sep 2008 Posts: 911

Do you know when this will be fully supported for ipoker?

Quote

03-01-2014 , 02:52 PM

#11272

Denise26

old hand

Join Date: Jan 2012 Posts: 1,211

Quote:

Originally Posted by reddev

Do you know when this will be fully supported for ipoker?

Hi Reddev

We hope to be adding more features for Ipoker in the next 1-2 months.

Quote

03-01-2014 , 08:28 PM

#11273

PineappleBrah

centurion

Join Date: Apr 2013 Posts: 174

I just want the feature '' Show stack size in BB for NL tournaments'' to work.
I wanna see how many bb's I have when playing.
I have hm2 and now tn2, how do I make this work?

Quote

03-02-2014 , 02:08 AM

#11274

NitUp

centurion

Join Date: Apr 2013 Posts: 160

I know you guys don't support TN1 anymore but I would like to know if you have a place I can download TN1 version. My TN1 version is a mess right now and I would like to uninstall it and reinstall it. Please help, thanks.

Quote

03-02-2014 , 06:16 AM

#11275

ontemu

centurion

Join Date: Jun 2012 Posts: 190

Still no fix for TN1 lag? I mean, it's been so bad for over a week already, cant play at all after ~2 hours.

Im not even going to consider paying for TN2 if it takes this long to fix simple bugs. Already losing thousands in equity.

Quote

Page 451 of 553

First

251 351 401 431 441 446 447 448 449 450 451 452 453 454 455 456 461 471 501 551

Last

Post Reply Subscribe

...

Page 451 of 553

First

251 351 401 431 441 446 447 448 449 450 451 452 453 454 455 456 461 471 501 551

Last