Please send a copy of the following files to support@alxsoftware.com and I'll check them over for errors:

1) Your TNLog and TNConfigAutoLoad files. You will find them in C:\Program Files\TableNinja

2) A screen shot of your desktop with a table and your HUD displayed. See instructions at http://www.iopus.com/guides/screenshot.htm Please send the screen shot even if you don't have a HUD or custom table theme.

I was using TN1 while this was happening but I could use this information on TN2 as well.
(I can't use TN2 because I had problems with it and I never got e-mailed those were solved and now I can't start the software anymore, the trial period has ended, and I trimmed down on the features on TN1 too I would use because SnG Sensei autoregistered wrong for me.)

My TN1 settings are:
"Table In Foreground" ticked and nothing more table control related ticked.
That is because I like how it behaves for me apart from that it switches me to the new table unexpectedly when I'd time out on one.
"Fix Cycling Loops" is ticked too, not sure what it actually does though but I like how it cycles, I can't cycle to the previous one I acted on with the PokerStars' own cycling.
I am playing stacked.

What I want is that tables that need attention would come in the foreground for me and become active targets and the other tables would stay in line until a decision is made (button is pressed) on the active one and no other table is targeted unless I press "next in line" or "first in line" hotkey, never.
There is no excuse for the table that I would time out at going in the background and switching me to the new one where I would accidentally carry out the rest of my button pressing action. Only the button presses should switch me to a new table from an active one where the button needs to be pressed. When I fail to press the button on time the decision is still not made and the tables shouldn't switch itself.

I have gone all in on the next table many times this way accidentally. How can I set up this correctly, please, both on TN1 and TN2 (if I'd use that some day, got no time to try it until you say everything works)? Maybe it can be done.
I need the tables to pop to the front automatically still.
You need to implement the feature that leaves the table to the foreground if timed out I think. Is that possible? It would be logical. From there I could get to the next active one with "first in line" or next hotkey.
I can't make a decision and carry it out at the next table that pops up unexpectedly. This is wrong.


The second question:
is the table counting issue with SnG Sensei resolved in TN2 (I did a TV session once on) or TN1 or both, or are you planning not to fix those at all since the Pokerstars' representatives were talking about implementing autoregistration in their own software soon?

Seems like no one has told it before, so i will...

Im using TN since for long now, as well as HM and HM2, so im loyal client, and so far it all was good since TN2 was released.

Its okey to pay for good service, if its good.

But TN2 is just greedy project compared to service it provides.

That new version is promised to be this

http://tableninja.com/images/TN2_-wide_banner.jpg

while in fact its sooooooo far away for being as promised.

Nothing really works in this version, i will not go in details, because its not just one function or w/e, but almost every aspect of it is not working properly, not that its closed to be next generation of effortless bla bla...



Im 100% sure that i will not use this s..t unless its all solved to the level you are selling to us!

1. Is this what you want? You want the first table having action to come to front of stack. Then:
- once you have acted on a table, the next table should come to front
- if you have not acted on the table, nothing should happen until you hit "cycle to first in line"

Please let us know if we've understood this correctly - so that we can explain how this can be done.

2. If you mean http://forums.holdemmanager.com/tabl...ed-stakes.html, yes, it is solved in both TN2 and TN1.

I am sorry to hear you are having problems with TN2, However we are getting updates released as quickly as possible. The new version that was released recently is 2.1.0.99 with the following fixes

* Join waitlist works for PP as well
* right click as hotkey works on FT
* FT: increment/decrement works even if betting increments different than 1BB
* Auto-rebuy + Auto-addon work on PS
* improving speed of Party
* fixed : Auto close Finished Tournament after X seconds not working on Party Poker

If there is issues you are having we would be more than happy to assist you in getting them resolved as quickly as possible.

i keep getting an error message upon starting tn2 that says "the current table must fit into a single monitor" ive tried resizing my tables to the minimum and also unplugging my 2nd monitor completely. im using the latest release 2.1.99 and playing on full tilt

After last update my table ninja 2 is not poping up the tables. I play ninja tile and this message appears all the time: "Manually clicked a table. The current layout is suspended until you hit Cycle to First In Line". Then I have to press first in line hotkey to popup the table every time.

I believe TN2 is just a horrible buggy program from the ground up. Honestly if you were to release a new program for more $ you should just base it on TN1 programming, change a bit of the interface so it looks like a new program and add a couple perky new features. I just do not think all these issues will ever be resolved enough and you are likely going to lose almost all your customers.

Worked like a charm!


Use TN1 ffs guys.

Go to change layout in the table control section > edit > edit again > a table will popup re size the table here click save and see if this solves the issue.

Are you manually clicking on the tables or using the hotkeys? Are you using Table under the mouse or Table in foreground? What layout are you using Tile cascade etc and what site is this happening on?

If you don't want that message to appear every time go to table control > untick show cycle to first in line warning

Yes, I want the first table having action to come to front of stack and then:

- yes, once I have acted on a table, the next table should come to front
- yes, if I have not acted on the table nothing should happen until I hit any cycling hotkeys (in fact, nothing should happen until I hit any other hotkeys as well) there are


I think this is the way most people would and use it when stacking tables anyway. The thing is it behaves according to all these abovementioned requests except that it ignores the line "nothing should happen until I hit hotkeys" if I time out on the table which falls under not having being acting on the table.
I can't predict timing out and timing out is not my acting and it shouldn't switch tables on timing out. I think there isn't such feature in TN so that it could recognize timing out, falling into sitout involuntarily that is, so that the table can be left in front if this is detected. Currently it behaves like this: the table where it is timed out on automatically becomes inactive (others in line are targeted) to bring up other tables in line where it is needed to act on.
In the worst case scenario, happened many times, I could arrive at the active table where there is 0.2 seconds only left to act and I wouldn't notice it this quick and I would carry out the action on the next table it switches me to.

That is, it might seem a little weird request but if I would not act on the active table in front I want it to stay in front forever, not making other tables active instead. I would notice sitting out, would sit back in and use cycling hotkeys to get to the tables where action is needed. So can you leave the table to front I would accidentally time out on and fall into sitting out on while there are tables in line? I think it can't be done at the moment. But the thing is switching tables without pressing hotkeys causes misclicks.

Hi,

Right now, this is not what happens in either TN1, nor TN2.

First off, by "nothing should happen until I hit any other hotkeys as well", you mean - the current table should not change no matter what, right (until you decide to change it)?

We have talked to our lead developer, and here's what he said:
1. In TN2, we can have an extra checkbox - which if ticked, will never move focus away from existing table, unless you act on it or manually move to another table.
2. In TN1, this is not possible. The closest thing you can get is to choose "Manually Clicked/Cycled" in Table Control Modes, and after each of your actions, just hit the "Cycle to FIL" hotkey. but for this to work you need to disable popup table when user action is required in PS > options > advanced multi table options

manually clicking,table under the mouse or tf both with the same problem. ps layout I dont know, does ps lyout matter?. Tn is ninja tile.

I was unable to reproduce this i was using Popup table when action is required and table in foreground when i manually fold the mouse jumps to the next active table.

If you are using tile layout and Table under the mouse then you need to hover the mouse over the table for it to come active.

Please PM me to arrange a tv session so i can get a look at your settings.

I have sng sensei set to keep open 23 sngs but the last few days it has been loading more and doesn stop loading. What is the prob ? This is for tn1

What version are you using? Can you send me a screenshot of your PS filters

I own TN1, I sent a mail to upgrades@tableninja.com however my email gets bounced back. How do I get my free months ?

Thanks for the information.

After some good amount of thinking, it is kind of complicated to achieve what I'd like. I did think of it as it would apply to the tables where I needed to act on but did not only (didn't manage in time), so these tables are not acted on as targets altough they did need a button press and then I'd sit back in and cycle.
I think it is not a good idea to make any target table permanently stay in focus as it would then happen to the tables in random cycling around as well and looking at previous tables cycling back, or acting and then there is no table in line yet and when it comes it wouldn't pop up.

Not that these misclicks would happen all the time. So I'm not sure it is worthwhile if not easily done. I can live without it as well. It is just that the actions on those tables would carry on to the next ones without notice if it is too late to act already. Happens not too often.

The email is support@tableninja.com however the upgrade is not available at the moment as we are waiting on two more versions the PS only version and the lite version once these are ready for release the site for upgrade + purchase will be available and you will be able to get your free months.

In the mean time you can use the trial if you have no days left on the trial pm me your account email and ill issue you a code.

Ill send this to our developers and see if this is possible or not ill update you here

http://forumserver.twoplustwo.com/sh...postcount=3106

FTP

This should be working update to this version http://www.holdemmanager.com/Downloa...etup2.1.99.msi

Can I get an installer for tableninja 1? Maybe my google fu is weak but I can't find one anywhere.

Here is the download links for PS, FTP and PP
http://tableninja.com/TableNinja.zip
http://tableninja.com/tnft/TableNinjaFT.zip
http://tableninja.com/tnpp/TableNinjaPP.zip