UTILITY TableNinja - Hotkeys and Utilities for PokerStars - Page 212 - Poker Software -- Two Plus Two Poker Forums

I don't have the close finished tournaments without notifications on, but I do have the close finished games in '20' seconds. should i turn the stars on and disable the tournament closer option in the TN opening/closing tab?

Leave the Stars feature off for now and try increasing the delay before games are closed to 3 seconds. Is the Sensei showing there are already two games registered when the problem happens? Please email a copy of the following files to support@alxsoftware.com and I'll check them over for errors:

1) Your TNLog and TNConfigAutoLoad files. You will find them in C:\Program Files\TableNinja

2) A screen shot of the table with your HUD displayed. See instructions at http://graphicssoft.about.com/cs/gen...screenshot.htm.

Quote:

Originally Posted by MalloryPoker

Can I use TN for FTP and TN for stars w/o them conflicting?

i.e., can i run both versions and have 4 games on Stars and 4 games on FT?

thanks!!

Both TableNinja and TableNinjaFT can be run at the same time. You cannot use the same hotkeys for both programs however. You can find more user sponsered information on multi-siting here:

http://tnforums.tableninja.com/showthread.php?t=1015

Quote

12-23-2010 , 10:32 PM

#5278

TheDegenFund

veteran

Join Date: Jul 2009 Posts: 2,552

Quote:

Originally Posted by 8=~Fool~=8

Hey mate, thanks for your help but I already found the solution. I didn't realise I had to up the 'Target number' box. I had it set to default 3 so it only loaded 3, hehe.

< stupid

Quote

12-27-2010 , 12:43 PM

#5279

UhtredTheUgly

journeyman

Join Date: Jul 2009 Posts: 334

Hey, the function "bet sizing" in the action hotkeys tab has not been working for me about half the time I play. I have "use scroll wheel" checked and increments set at 0.5 SB but this sizing doesn't work sometimes (bets are being changed by 1 BB instead).

Quote

12-27-2010 , 02:05 PM

#5280

8=~Fool~=8

old hand

Join Date: Nov 2008 Posts: 1,630

Are you using Microsoft Security Essentials? If so its likely blocking TableNinjas attempt to control mouse hotkeys. Try adding TableNinja to its list of excluded programs in its options tab. Also disable UAC according to the following instructions:

http://faq.holdemmanager.com/questio...UAC+(Windows+7)

http://faq.holdemmanager.com/questio...Off+UAC+(Vista)

If your still having trouble after please send a copy of the following files to support@alxsoftware.com and I'll check them over for errors:

1) Your TNLog and TNConfigAutoLoad files. You will find them in C:\Program Files\TableNinja

2) A screen shot of the table with your HUD displayed.

Quote:

Originally Posted by UhtredTheUgly

Quote

12-27-2010 , 08:27 PM

#5281

ladybruin

veteran

Join Date: Sep 2008 Posts: 2,982

Anyone playing with the Slick Theme?

Am I likely to have any glitches or problems? I'm going to try it out on play money, but was wondering if anyone is using Slick theme???

edit: limit holdem cash games

Last edited by ladybruin; 12-27-2010 at 08:48 PM.

Quote

12-28-2010 , 11:11 AM

#5282

8=~Fool~=8

old hand

Join Date: Nov 2008 Posts: 1,630

Quote:

Originally Posted by ladybruin

Unfortunately the Slick theme isn't supported at this time. You'll either need to use Classic, Hyper-Simple, No-Images, or download the new TableNinja Beta that supports the Black theme. You can also find TableNinja compatible themes on Tiltbusters.com.

Quote

12-28-2010 , 01:02 PM

#5283

Qwiksilfver

newbie

Join Date: Feb 2006 Posts: 31

Recently when using sng-sensei, tables doesnt show up on screen when game starting. i have to go to "Registered in tournaments" in stars client and launch tables from there.

It doesnt happen every time i play, but last couple of days it has happened about 10 out of 20 sets....

Using latest version of TN.

What to do?

Qwik

Quote

12-28-2010 , 01:28 PM

#5284

ladybruin

veteran

Join Date: Sep 2008 Posts: 2,982

Quote:

Originally Posted by 8=~Fool~=8

I downloaded version 1.2.83.0 yesterday. I don't see the Black Theme beta listed. Is the lastest version the beta or is there a separate beta download? If there is a separate beta download...link please.

Edit: For anyone interested in beta Black Theme I found it on TN forum it is version 1.2.88

Last edited by ladybruin; 12-28-2010 at 01:35 PM.

Quote

12-29-2010 , 01:11 PM

#5285

8=~Fool~=8

old hand

Join Date: Nov 2008 Posts: 1,630

Quote:

Originally Posted by Qwiksilfver

I've not had any reports of this and am unable to reproduce it. There is a delay before some games are opened. If Stars shows you as registered I'm afraid TableNinja has done its part. You might try removing and reinstalling Stars.

Quote:

Originally Posted by ladybruin

You can find more information and the Beta here:

http://tnforums.tableninja.com/showthread.php?t=2205

Quote

12-29-2010 , 06:58 PM

#5286

HonestRyan

grinder

Join Date: Mar 2007 Posts: 556

I searched and could not find an answer. Will TN on stars support the 20bb cap games? this would be huge to me if it did. when i open up a table I just get a message that TN doesnt support Cap games. is this just temporary?

TIA!

Quote

12-29-2010 , 10:22 PM

#5287

SumnerIII

journeyman

Join Date: Nov 2008 Posts: 394

I have the most recent version of TableNinja. During a session using TableNinja on PokerStars I hit some Windows pop up thing that changed my Windows Vista theme to "Windows Classic" (was on Aero before, I believe). Now my TableNinja hotkeys don't work properly. My key for "Fold" works sometimes, but when facing a raise preflop or when facing a bet on the flop hitting the "Fold" hotkey causes me to call instead of fold. I switched my Windows theme back to the Vista theme, but TableNinja hotkeys are still not working properly. Looking for a fix, thanks.

EDIT: I'm playing tournaments.

Quote

12-30-2010 , 01:45 PM

#5288

8=~Fool~=8

old hand

Join Date: Nov 2008 Posts: 1,630

Quote:

Originally Posted by SumnerIII

This is Windows trying to optimize your system and can happen when there is strain on your graphics card. Click "no" if possible. If it shuts Aero down anyway you'll need to switch back to an Aero based Windows theme manually by right clicking the desktop and choosing "Personalize". Select an Aero theme, then close and re-open TableNinja to make sure all the theme swapping doesen't cause any problems. Also, make sure that the borders of your windows/tables are glassy and transparent after.

Quote

12-30-2010 , 05:29 PM

#5289

starvingwriter82

Carpal \'Tunnel

Join Date: Feb 2009 Posts: 7,793

Quote:

Originally Posted by 8=~Fool~=8

We may add hotkey and table control support for CAP games but I don't have an ETA for you.

Please let it be soon.

Quote

12-31-2010 , 10:36 AM

#5290

penfold

banned

Join Date: Nov 2010 Posts: 2,279

Hi, using windows 7 and I have had much correspondance with you over certain issues before but I just discovered today that I have been on a basic and high contrast theme all along and I'm sure I've read that Aeros themes are best. So I switched to an Aeros theme and things got a bit worse if anything. I still get focus steal going on but also now I'm getting a bit of lag when fast folding and also as each table pops up thru quick folding the screen flashes black, like there's a milli second flash of blackness, I think just on the table area not the whole screen. So I've just reverted back to basic theme it seems best?

Quote

12-31-2010 , 06:03 PM

#5291

8=~Fool~=8

old hand

Join Date: Nov 2008 Posts: 1,630

Quote:

Originally Posted by penfold

Aero based themes are more resource intensive. If your machine isn't very fast you could notice a decrease in performance. Most PC's should run it just fine though. Its possible you still have another settings conflict. Please email a copy of the following files to support@alxsoftware.com and I'll check them over for errors:

1) Your TNLog and TNConfigAutoLoad files. You will find them in C:\Program Files\TableNinja

2) A screen shot of the table with your HUD displayed. See instructions at http://www.iopus.com/guides/screenshot.htm.

Quote

01-01-2011 , 02:26 PM

#5292

MelissaVLok

centurion

Join Date: Sep 2008 Posts: 137

how do i make TN remember where to open on my screen?
thx in advance.

Quote

01-02-2011 , 06:44 AM

#5293

BBSB

newbie

Join Date: Feb 2008 Posts: 40

Please make this to function with draw games.
Can't you at least make check-fold-bet to function with draw games?

Quote

01-02-2011 , 07:44 PM

#5294

8=~Fool~=8

old hand

Join Date: Nov 2008 Posts: 1,630

Quote:

Originally Posted by MelissaVLok

how do i make TN remember where to open on my screen?
thx in advance.

This should happen by defualt. When the program is closed its last position on the screen is recorded.[ TableNinja should open again in the same location.

Quote:

Originally Posted by BBSB

Please make this to function with draw games.
Can't you at least make check-fold-bet to function with draw games?

TableNinja doesn't support draw games at this time. I'll be happy to pass the suggestion along to the developers though.

Quote

01-03-2011 , 03:30 AM

#5295

jglsd1

veteran

Join Date: May 2008 Posts: 2,445

Quote:

Originally Posted by BBSB

Please make this to function with draw games.
Can't you at least make check-fold-bet to function with draw games?

+1!

Quote

01-03-2011 , 10:20 AM

#5296

MelissaVLok

centurion

Join Date: Sep 2008 Posts: 137

Quote:

Originally Posted by 8=~Fool~=8

This should happen by defualt. When the program is closed its last position on the screen is recorded.[ TableNinja should open again in the same location.

Mine don't.....even if i click save current config.
Its been like this on my old PC as well as my new PC since day one.

Pls help.
Thx.

Quote

01-03-2011 , 05:13 PM

#5297

8=~Fool~=8

old hand

Join Date: Nov 2008 Posts: 1,630

Quote:

Originally Posted by MelissaVLok

Mine don't.....even if i click save current config.
Its been like this on my old PC as well as my new PC since day one.

Pls help.
Thx.

I'm able to reproduce the problem on my machine. I'll pass the information on to the developers.

Quote

01-03-2011 , 06:57 PM

#5298

Scyth

enthusiast

Join Date: Aug 2010 Posts: 80

Hi

I'm having some issues with table ninja. I'm basically having the same problem a guy mentioned on the previous page my table ninja doesn't work properly ie pressing my assigned fold button causes me to call instead no matter which button I assign fold to.

I basically had windows professional installed and I had to reinstall xp not processional, before this table ninja worked fine. I've messed around with the themes but it's not making a difference.

Any help would be appreciated as I could really do with being able to mass multi-table with table ninja again thanks

Quote

01-03-2011 , 08:19 PM

#5299

8=~Fool~=8

old hand

Join Date: Nov 2008 Posts: 1,630

Quote:

Originally Posted by Scyth

TableNinja is designed so that the smart action hotkeys check the button they are targeting and it should be impossible for the program to call instead of fold. If this is happening you may have some sort of major conflict and I recommend you stop using the program until we can figure out whats happening. Please email a copy of the following files to support@alxsoftware.com and I'll check them over for errors:

1) Your TNLog and TNConfigAutoLoad files. You will find them in C:\Program Files\TableNinja

2) A screen shot of the table with your HUD displayed. See instructions at http://www.iopus.com/guides/screenshot.htm.