I can't get the tile, cascade or stack function to work.. i wanna tile 20 tables on my 21" screen. And pokerstars software only allows me to tile 15 max. Anyone ?

Try increasing your "%Pot" pre-set to more than 100%. This pre-set doesn't hit the "Max" button in Stars, instead it does a quick calculation.



There is a minimum size for PokerStars tables though I can't say how many you should be able to fit on your screen. Its based on your screen size and max allowable resolution.

TN only creates a short cut to the functions of the tables on PS. So what ever PS allows you to do, TN will let you do it with the click of a button.

Get a higher resolution monitor, or learn to multi stack and save your table layout.

ie...

6 tables tiled, with 4 tables stacked on each table. that will give you 24 tables...


Now, what I do, is Stack, and have one big stack, and use a Table Control hot key to move a table to the side if I have something that is really of interest on that table, or just want to see the bad beat I am going to take for example...

You can have 3 different locations to ship a table to so its pretty handy I find.

I'm experiencing lag everytime TN has to read an action. I repaired the program and am running classic theme with everything correct in the general setup, or atleast the way it was when it was running fine.

Anyone else getting lag? Not sure what the problem is. Thanks

i've set mouse wheel to increment 0.1 SB's and it dos not work when i've more that 6 tables.

when tables are stacked sometimes 1 mouse click makes 2 folds, this actually tilts me a lot

There is likely some sort of configuration error causing this but its hard to say without more information. Please email a copy of the following files to support@alxsoftware.com and I'll check them over for errors:

1) Your TNLog and TNConfigAutoLoad files. You will find them in C:\Program Files\TableNinja

2) A screen shot of the table with your HUD displayed. See instructions at http://graphicssoft.about.com/cs/gen...screenshot.htm.

Going crazy trying to use this for headsup. The raise amounts are going wacky.

Sometimes it tries to openraise to 2.4bb for some unknown reason.
My openraise size is changing between that and the correct size.
It is set to 2.9bb + 0.5 or 1.0bb/limper

Also, the 3bet is sizing vs a std 3bb open is 7x at times instead of the 114% it is set to.

I'm one-tabling here so that isn't the issue.

Maybe read teddyfbi's post/quote again.
Are you saying your program can not properly calculate a pot-sized raise?

Right around the time the timebank button appears i have been experiencing a great deal of frustration as i attempt to click fold, call, or raise.. It often requires me to mash the desired button 6+ times. this is really really annoying and i can guarantee there are many otheres experiencing similar issues.. is there any possible way i can fix this? It must be tableninja stealing focus similar to an autistic child in church

Its likely there is a configuration error causing this. Please email a copy of the following files to support@alxsoftware.com and I'll check them over for errors:

1) Your TNLog and TNConfigAutoLoad files. You will find them in C:\Program Files\TableNinja

2) A screen shot of the table with your HUD displayed. See instructions at http://graphicssoft.about.com/cs/gen...screenshot.htm.



You can find more information on how TableNinja calculates the pot here:

http://tableninja.com/faq.php#How is the pot size calculated for the percentage pot bets?



Are you using an Aero based Windows theme? Please email a copy of the following files to support@alxsoftware.com and I'll check them over for errors:

1) Your TNLog and TNConfigAutoLoad files. You will find them in C:\Program Files\TableNinja

2) A screen shot of the table with your HUD displayed. See instructions at http://graphicssoft.about.com/cs/gen...screenshot.htm.

sending you that info is pointless, you know how tableninja behaves when a time bank button appears, it rapidly clicks it right? so what if i'm trying to click fold at the same time?

TableNinja will only send one time-bank activation or one hotkey at a time. If you send multiples they are qued and only applied if the intended target still remains. Both the click location and table number is recorded for each action and they will not send to another location or table. Without the files I mentioned it will be extremely difficult to guess at the configuration error thats causing the problem you noticed.

I'm talking about the auto click time banks feature, i'm not sending any hot keys, i'm clicking with my mouse on the fold button and the buttons arent being pressed because mouse focus is stolen. I notice the problem only happens when the time left to act inicator is there and the time bank button is there, looks like TN is just rapidly clicking the time bank button, while i'm rapidly clicking the fold button battling for focus til the hand is folded, all the while i have other tables timing down.

Doesn't stars automatically click the time bank if you have any money in the pot

If a click fails to send it will be resent. The only reason for it to be sent over and over would be if you have some sort of configuation error thats making it impossible for it to go through. I'd guess a custom theme or an old theme thats not been updated with the new timebank locations but its hard to say without any information on your PC.



Yes, at least for cash games. Though it won't be activated pre-flop unless you have a blind in front of you. I've not tested every other format so its possible this doens't happen for some.

The auto reg function is not working for me,every time I click on test ,it puts the min and max in the filters to $0,so there is no games to reg in?

Thank you

demetri1978

Hi guys

I have a new pc, and I've downloaded TN onto it and got it up and running, but is there a way for me to copy all my settings across in one go or do I have to go through and do them all one by one again. I checked the FAQ on your website and couldn't find any suggestions.

Cheers

There have been reports of inconsistant behavior with the Stars SnG filter. If you have a filter saved thats clearing the min and max buyins you'll need to delete it and make another. Once you have one thats triggering correctly saved the problem won't return.



You can go to TableNinja>File>Save current config as. Then move this file to the new PC. Once there go to TableNinja>File>Import Config (Maintains the Setup Tab) to replace it. Make sure to check over the setup tab as your new machine may use a different OS.

Would really appreciate some help with this one. I'm using the TN trial and will def purchase if I can iron out these issues.

Set it up for use with the Sit n Go Sensei Opener. Yesterday had it set for 15 total tables, for a period of 90 minutes and had no problems. I'm using it alongside PT3 (pokertracker). Played through total of 27 games in this time, no glitches, fine.

Today I set it to 20 tables, and a max total of 20 tables (instead of 90 minutes) so it wouldn't open new games as I lost games (as I wanted a shorter session). Again with PT3. Worked fine up til 18 tables, then when the 19th opened automatically, the whole thing just spazzed out. I'm playing stacked and full-screening each table as they open (as with stars they default open to less than full size on my laptop, even with TN set to stacked). The spazz out was such that when a table popped to the front for attention it was displaying a flop or board from a previous table alongside my hole cards for both the previous and the new table, for example. A mixture of content for multiple tables was displayed at any one time, and I could still click fold/bet etc. but obv was unable to continue. I also couldn't CTRL-ALT-DEL or close anything properly, and while my timebank vanished I turned the comp off at the source and restarted.

I'm wondering what the root cause of this could be. My laptop is 2.09 GHz, w/ 1.99 GHz of RAM and plenty of hard disk space, so I'm finding it hard to believe that its a memory overload problem of some kind. When I restarted I didn't risk opening PT3 again (partly as I had zero timebank left and wouldn't have had much time for viewing stats anyway) and with that plus 0 timebank plus some bad beats I ended up considerably down for the session, but the problem did not reoccur. I also left the tables as overlapping tiles, which is what they came up as by default, despite my TN being set to stacked. Not sure why this is either. This is not a big deal in itself but I need to work out why this occurred and what best to do about it if I'm to continue using TN with any confidence.

Many thanks, I look forward to getting this sorted!

Can you add a feature,

A window pop up or tab that show all keys that are assigned?? Also if they can glow when a key is being pressed, this will show if a key is stuck.

Thanks!

This happens on my laptop too... quad core i7 w/ 6GB ram and dedicated nvida graphic card...

I have a second monitor that I keep my tables on full size stacked.... I move a table with hot key over to my laptop screen if I want to see action...

when this happens, I hit my STACK hot key to "ReStack" my tables... this way it clears the glitch (which I think is in PS)...

This happens MOST of the times when I move a table to the side and move it back, the "re-sizing" of the table is what messes it up. So, when I move the table back to the stack, I always "recycle" the tables by re-stacking them.

Hope this helps.

hi, FTP had a crash and now TN for FT doesnt work, is there a seperate thread for TN FT or am i in the right place?

never mind i found it.

Does anyone know what it is. When i setup tableninja to autoreg me for the 2/180s and only have these in the filter, sometimes it works but it doesnt work for long, after a while it just stops. and when i stop and restart it won't work. dno what im doing wrong because when i press test i get the same filter with only 2/180s in the lobby..

i have tableninja and pokerstars lobby open on my 2nd monitor. really tilting that it just doesnt work most of the time..

It sounds like there are several configuration problems and that your machine might not meed the reccomeded specs for multi-tablers. Please email a copy of the following files to support@alxsoftware.com and I'll check them over for errors:

1) Your TNLog and TNConfigAutoLoad files. You will find them in C:\Program Files\TableNinja

2) A screen shot of the table with your HUD displayed. See instructions at http://graphicssoft.about.com/cs/gen...screenshot.htm.




Thanks for the suggestion. I'll be happy to pass it along to the developers.



Try going to TableNinja>General and check the box marked "Refresh resized windows with F5". Then do the following:

•From the main PokerStars® lobby click Help -> Open My Settings Folder
•Right Click on your User.ini file and click edit
•Below the word "[Options]" add the following exact text (without the quotes) "f5redrawtable=1"

This will prevent the fuzziness around the edges of tables that happens sometimes when they are resized to quickly.


The thread for TableNinjaFT can be found here

http://forumserver.twoplustwo.com/16.../index227.html



Is the Sensei showing that your already registered for 2 games when this happens? Its possible a tournament is being closed before its file has been written. Do you have TableNinja set to close finished games in zero seconds or the Stars "close finished tournaments without notification" turned on?

I don't have the close finished tournaments without notifications on, but I do have the close finished games in '20' seconds. should i turn the stars on and disable the tournament closer option in the TN opening/closing tab?