I was going to try TN2 again,but won't bother now. I'll always remember good old TN1 with nostalgia.Thank you Holdem Manger for ruining perfect software.

I'm going to be honest with you. This software (TN2) has potential but I can't trust this software like I trusted TN1. In TN1 I just put him opening SNG and didn't look to him anymore... I can't do this in TN2 cause sometimes he has some issues, for some reason SNG stops or other **** happens, so I can't trust him cause some issues happens only once in a while so I have to keep an eye on him.

For the other side, TN2 has features that I really need it and TN1 don't have them... This program has a lot of room for improvement but seriously, sometimes pisses me off and ask myself why I paid almost a whole year of bugs!

Sorry about my english.

Cheers!

Thank you for the suggestion. We will discuss it over the next couple of days and make a decision on whether to add the requested feature. We would love to add everyone’s suggestions, but we also need to be careful that we do not over complicate the software with too many features. As a result not all of them are implemented. If we do not add your feature on this occasion, we may reconsider it if more people also show support for it.

Please email support@tableninja.com with a link to this thread and your forum post to arrange a tv session with a member of our team.

Hi.

I am sorry to hear you are having problems with SNG sensei, however we have no other reports of this issue occurring where it stops, the only way SNG sensei would stop is if it has reached the amount of SNGs specified, you switched to another tab in Pokerstars lobby other than the SNG tab, You closed the SNG filter in Pokerstars.

If you could send us the log of when exactly this happened then we would be able to pin point exactly why it stopped and get it resolved for you.

Its just i reviewed the logs you sent to our support team and you had Popup table disabled in TN2, In regards to the features you see in the screenshot you can choose what you wish here see this FAQ for more information on the features http://hm2faq.holdemmanager.com/ques...opup+%28TN2%29

If the tables are still not popping up then we can do a tv session with you just email our support team support@tableninja.com with a link to this thread and we can set one up.

Well, It's one year of bugs, lots of money lost due to this software too, at least for me! I will never trust him like I trusted TN1! And pisses me off that I had to renew my signature with you guys without at least having a couple months free for the money your software made me lost! Countless bugs! You solved quite a few but after losing money and waiting for updates...

Another isolated event: Again, money lost due to your software right in the middle of the session! I'll just gonna put this:



Where's the BB? It just disapeared from the tables, I can't find it on the software, on pokerstars table neither even after reboot the program countless times... lol Is it because of the mercury theme? Why everything seem to work and not the BB in the tables? I just change the place... It's out of the display screen? I reboot the computer! Unistall and reinstall TN2! I even put the font on max just to try to make the thingy appear on TN2 display so I could adjust it... Send the logs right?
Did I mentioned before that this software tilts me more than poker sometimes? Yeah!

It looks like you dragged the BB display counter out of the display window, the only way you can resolve this is to close TN2 and go to the following location - C:\Users\yourname\AppData\Roaming\TableNinja.v2 and move the following file to your desktop keys_user.txt then restart TN2 and the BB display should appear in the display window, this will mean that you have to setup your configuration again.

Please don't drag the Display windows off the display window other wise this issue will occur again.

What other bugs are you having so we can get them fixed for you.

Isn't easier just to delete everything there since I have to setup all the configuration again?
Why you built the display this way since this kind of things can happen cause people need to see the tables first and set the place for BB in the table after?
I think it would make more sense that the display had "out of bounds" limits!

Hi,

I have already notified the developers of this issue and asked them to make it that the display could not be dragged off the display window, so this will be added at some point, I will remind them of this again but for now as i stated the easiest thing to do is remove the keys_user file as this holds all configuration so by removing that you are starting fresh again. The only pain is having to redo all the setup but unfortunately this is out of my control, the only thing i can do is bump this issue again.

is there a way to fast fold on zoom via a hotkey on TN1?

Hi,

Yes it is in the Hotkeys section > Advance Actions > AA check/fold this will work when it is not your turn to act at a table.

i play with stacked tables, but want to be able to drag a table to the side and leave it there unless i refresh. however tn2 constantly refreshes the stack meaning tables i take out go back into the stack

is there anyway to solve this?

thanks

Hi,

Are you manually taking the table out of stack or are you using the Set table aside feature? If you are manually doing this then we suggest you use the set table aside feature to avoid this from happening see this FAQ for further information - http://hm2faq.holdemmanager.com/ques...et-table-aside

I am manually doing it which is what I would prefer if possible?

Hi,

I have just tested your issue using stack layout and dragging tables out of the stack, for me these tables remain out of stack the only way they go back to the stack layout is if i click on the Re-Apply layout HotKey.

When you drag the tables out do they go back right away or after a few minutes or when?

I would need to see your configuration to see what your setup is.

Please reproduce issue, then go to TableNinja 2 > Help > Contact Support and click the "Send logs to TableNinja" button. Then send a copy of that ZIP file to support@tableninja.com to check it over for errors.
Also please send a screenshot of your desktop with a table and your HUD displayed. See instructions http://graphicssoft.about.com/cs/gen...screenshot.htm Please send the screenshot even if you don't have a HUD or custom table theme.

Please also briefly describe what is happening in the email.

[x] popup table whenever action is required

I have this option turned on.

but how do I prevent the tables from stealing focus? for example;

Table A pops up, but before I can make my move, table B pops up.

I would like to act first before the next table pops up.

thanks.

Hi,

Firstly what site are you playing on? Make sure you have Popup table disabled in the poker client if you are using Popup table in TN2, I would also need your log file to see what your configuration is Please reproduce issue, then go to TableNinja 2 > Help > Contact Support and click the "Send logs to TableNinja" button. Then send a copy of that ZIP file to support@tableninja.com to check it over for errors.

Also please send a screenshot of your desktop with a table and your HUD displayed. See instructions http://graphicssoft.about.com/cs/gen...screenshot.htm Please send the screenshot even if you don't have a HUD or custom table theme.

Please also briefly describe what is happening in the email.

Hi,



Honestly I thought this was already fixed!
Stars.fr, lastest beta version. I don't have 1 BB.

Other thing, Is it possible do round BB in a certain BB level? For example, from bb 20 to 60 I want TN2 to round them and from 60 forward not. This is not possible right?

Cheers.

Every time I load TN2 the table layout setting switches back to Tile and not my usual choice Stack a bit annoying I have to change this back every time I load TN. Is this a known Issue?

Oh and one important thing I forgot to mention, 'Sit out next hand at all tables' for SNGs when I press this hotkey I do get sat out, however when I press again to sit back in or I Manually select via stars to sit me back in I get sat back in but my hands get insta folded...I have to fast close and restart TN2

I cannot reproduce this on stars.com and we had no other reports of this, Please reproduce issue, then go to TableNinja 2 > Help > Contact Support and click the "Send logs to TableNinja" button. Then send a copy of that ZIP file to support@tableninja.com to check it over for errors.
Also please send a screenshot of your desktop with a table and your HUD displayed. See instructions http://graphicssoft.about.com/cs/gen...screenshot.htm Please send the screenshot even if you don't have a HUD or custom table theme.

No this is not possible, If you enable it then it is enabled for all filters in the betting tab.

Hi,

I am unable to reproduce either of your issues and we have had no other reports of it, Please go to the help tab > debug hotkey > assign a hotkey here, then Please reproduce both issues and as soon as they occur click on that debug hotkey, then go to TableNinja 2 > Help > Contact Support and click the "Send logs to TableNinja" button. Then send a copy of that ZIP file to support@tableninja.com to check it over for errors.

Also please send a screenshot of your desktop with a table and your HUD displayed. See instructions http://graphicssoft.about.com/cs/gen...screenshot.htm Please send the screenshot even if you don't have a HUD or custom table theme.

Please also briefly describe what is happening in the email or link to this forum post with your forum name.

In TN2 is it possible to change the default bet sizing in the bet box based on blind levels without using a separate hotkey ? I'd like 3x the BB during 1st 2 blind levels and 2x for any levels past that.

Hi,

Yes this is possible, see the image below explaining how to do this, also see the following FAQ that might be helpful to you - http://hm2faq.holdemmanager.com/ques...ting+%28TN2%29

If you have any further questions please let us know.

Having issues working TN2 Sensi to Auto reg, I have followed all steps and nothing seems to work. Also when I click 'Start' it just sticks on 'Sorting' Then I can no longer edit anything on Sensi tabs its just greyed out.
I have Denise on skype if we can sort out a Quick help meeting

Is there any promotion available at this point for TN2?